Effects of equipment loadings on geosynthetic-lined slope behaviour.

When combined in the lining and covering of waste-containment facilities, soil and geosynthetic components protect the environment by acting as a hydraulic barrier. Equipment loading may significantly increase the tensile stress induced in geosynthetic components, leading to a potential stability problem. Large equipment loadings may also result in a localized circular slip surface during construction operations. New analytical method based on discrete element modelling is proposed for estimating the distribution of tensile force developed in the individual geosynthetic components of the lining system and for evaluating the safety factor of slope failure due to equipment loading. The analytical results of an example are presented to demonstrate the applicability of the analytical method for the lining system of a waste landfill. The analyses of the example show that equipment loading provide a substantial increase in the tensile forces of the geosynthetic components of a lining system and that the possibility of shallow failure due to equipment loading increases as the slope becomes steeper. This method is a useful tool for analysing the lining system of waste landfills with complex lining components.     

萃取分光光度法测定工业废气中的游离溴

用萃取分光光度法测定工业废气中的游离溴，并对样品的采集与保存，萃取条件的选择进行了研究。结果表明，当溴的含量在１８．０－４５０．０μｇ／ｍＬ范围同时，吸光度与浓度具有良好的线性关系，方法的采样效率大于９９％，精密度和准确度较好当采集气体为１００Ｌ时，最低检出肖度为０．１４ｍｇ／ｍ＾３。     

旧城保护与更新的生态学方法思考

从当前旧城改造中存在的问题入手分析，用生态学的方法进行剖析，试图探索旧城改造的新模式－健康城市的生态学模式，即建立舒适宜人，协调运转的城市体系。     

炼铁厂高炉原料仓料位计的选择与应用

高炉料仓环境条件恶劣，而高炉生产又要掌握料位情况。比较了2种料位计，最终选择了SA—2型料位计。     

燃煤锅炉排烟脱硫技术

本文介绍了治理燃煤排烟除脱ＳＯ２的主要技术和工艺流程，并对其进行了比较。     

脱硫石膏综合利用现状及其抹面材料的研制

概述了目前有关脱硫石膏性能及其利用的研究现状,研究开发了建筑用脱硫石膏抹面材料,此种材料经性能检测,其抗压强度、抗折强度分别达到 4.5 MPa、 17.5 MPa,且粘结性能优良,为脱硫石膏的再生利用提供了另外一条有效的途径.     

Analysis of Roadside Inhalable Particulate Matter (PM10) in Major Korean Cities

A data analysis of three major Korean cities was conducted to assess roadside inhalable particulate matter 10 μm or smaller in aerodynamic diameter (PM₁₀), including temporal and meteorological variations, over a recent period of 4 to 6 years. The yearly roadside PM₁₀ concentrations presented a well-defined increasing trend or no trend depending on the roadside monitoring station. Most mean values exceeded or approximated the Korean standard of 70 μg/m³ per year for PM₁₀. A representative roadside diurnal trend was characterized by a distinct morning maximum. In most cases, the Sunday roadside concentrations were similar to or somewhat lower than the weekday concentrations, and the PM₁₀ concentrations presented a well-defined seasonal variation, with the maximum concentration in March. The monthly maximum concentrations observed in March were most likely attributable to Asian dust storms. In two metropolitan cities (Seoul and Busan), the frequency of days with roadside PM₁₀ concentrations exceeding the standard of 150μg/m³ per 24 h was much lower for the roadside monitoring stations than for the residential monitoring station, whereas in the third city (Daegu), this result was reversed. Interestingly, the average maximum concentrations observed for the roadside sites in Seoul and Busan during March were higher than those for the residential sites, suggesting that the roadside concentrations responded more to the dust storms than the residential areas. The relationship between the pollutant concentrations and five important meteorological parameters (solar radiation, wind speed, air temperature, relative humidity, and precipitation) showed that the number and type of meteorological variables included in the equations varied according to the monitoring station or season. Finally, the current results confirmed that attention should be given to the PM₁₀ exposure of residents living near roadways.     

Characterization of the Songhua River sediments and evaluation of their adsorption behavior for nitrobenzene

The explosion at a plant of the Jilin Petrochemical Corporation on 13 November,2005,and the spill of an estimated 100 t of toxic substances (nitrobenzene as the main component) into the Songhua River received worldwide attention.This study has focused on the adsorption behavior of nitrobenzene that spilled onto sediments along the Songhua River,which was one of the efforts to evaluate the fate of nitrobenzene after the spillage event.The organic carbon contents of these sediments along the Songhua River ...     

4种动物养殖场空气中抗生素耐药菌的生物多样性及群落结构

动物集约化养殖场可向空气环境释放大量微生物,包括抗生素耐药菌甚至是耐药致病菌,危害动物和工人健康并污染周边空气环境.针对以上问题,本研究以四环素和红霉素耐药菌为例,对动物养殖场空气颗粒物负载抗生素耐药菌的生物多样性以及群落结构展开研究.基于高通量测序技术,对比分析动物舍内与舍外颗粒物,以及粪便样品中抗生素耐药菌的生物学差异,并研究驱动以上差异的关键菌属.结果表明,整体上养殖场空气颗粒物负载红霉素耐药菌的生物多样性高于四环素耐药菌,舍内空气颗粒物负载生物的多样性高于粪便样品.细颗粒物和粗颗粒物负载抗生素耐药菌的生物多样性和群落结构均无显著差异. Actinobacteria是导致红霉素耐药菌和其他细菌群落差异的关键菌门之一,Staphylococcus是四环素耐药菌群区别于红霉素耐药菌和全部细菌菌群的关键菌属之一.群落结构研究结果显示,四环素和红霉素耐药菌的优势菌群和群落结构没有显著差异.但粪便和空气颗粒物负载生物的群落结构在属水平上差异显著,优势菌门也有所不同.本研究结果将为准确评估动物养殖场空气环境中抗生素耐药菌污染现状及其生态风险提供基础数据.     

微孔TiO2负载Pt吸附强化矿化甲苯的性能

矿化效率不足是光催化技术应用于挥发性有机化合物（VOCs）净化的关键限制因素之一。为了提高VOCs的矿化效率,制备了高比表面（736 m2·g-1）微孔TiO2材料,以其为载体构建了微孔TiO2与Pt的吸附强化光催化二元结构体系。采用比表面积（BET）、透射电镜（TEM）、X射线光电子能谱（XPS）等方法考察材料结构,并以甲苯为VOCs代表研究材料的吸附-光催化特性。结果表明,Pt修饰微孔TiO2表现出特异的吸附和催化能力,甲苯平衡吸附量和矿化效率分别是P25的3.8~4.1倍和2.6~2.9倍。微孔TiO2载体除了吸附强化作用外,其表面通过Pt修饰可产生大量表面羟基,从而利于Pt-TiO2的常温催化过程。