Catalytic degradation of toxic organic dye using an aluminum-doped Cu0.4Zn0.6-xAlxFe2O4 (x = 0.0, 0.2, 0.4, 0.6) spinel ferrite in a photo-Fenton system

Catalytic activity of spinel ferrite in breaking down toxic dye materials are promising due to their uniqueness. In this study, aluminum-doped copper zinc ferrite, Cu_0.4Zn_0.6-xAl_xFe₂O₄ (x = 0.0, 0.2, 0.4, 0.6), a catalyst for toxic dye degradation is synthesized through chemical co-precipitation route. The formation of the spinel ferrite catalyst is initially confirmed by Fourier transform infrared spectra, which shows the frequency of metal-oxygen bond vibration at 539 and 427 cm⁻¹ attributed to the tetrahedral and octahedral sites respectively. Higher intensity sharp peak of X-ray diffraction for (311) plane is the evidence for the phase purity and the formation of spinel ferrite. The crystallite size is found to decrease with the increase of Al³⁺ ion. The surface structure of the obtained particles is investigated using a scanning electron microscope. Analyses of the material's magnetic characteristics using a vibrating sample magnetometer (VSM) revealed that it is, in fact, a soft magnet, as evidenced by the loop of its hysteresis, which is narrow. The catalytic degradation of methylene blue dye under the mechanism of the photo-Fenton process is studied with the obtained spinel ferrites and the result is found to be as high as 96.5%. The process follows pseudo-second order kinetics and the Langmuir isotherm.     

A fuzzy goal programming with interval target model and its application to the decision problem of renewable energy planning

Environmental and Ecological Statistics - Optimizing sustainable renewable energy portfolios is one of the most complicated decision making problems in energy policy planning. This process involves...     

Toxicity of Water-Soluble Fractions of Four Fuels for Metamysidopsis insularis, an Indigenous Tropical Mysid Species

The toxicity of the water-soluble fraction (WSF) of four fuels (leaded gasoline, unleaded gasoline, diesel, Jet A-1) to Metamysidopsis insularis, an indigenous tropical mysid species was determined. Approximately 10 000 barrels (bbl) of fuel are consumed daily in Trinidad and Tobago, and about 50 000 bbl are exported. Accidental discharges at points of transfer as well as from inadequate storage facilities, can pose a significant contamination risk to the environment. Organisms were assayed with the WSF under both UV and fluorescent lights. The WSF was prepared using different fuel/seawater (v/v) mixtures. It was found that organisms exposed to diesel, Jet A-1 and unleaded gasoline showed similar toxicological responses under both light regimes, and were more toxic than the leaded gasoline. The results also showed that none of these fuels show photo-induced toxicity. The WSF of the 0.1% mixtures of unleaded gasoline, diesel and Jet A-1 were acutely toxic to M. insularis. However, for the leaded gasoline, only the 0.5% mixture was acutely toxic. The high toxicity of these fuels may be due to the presence of light, more soluble fractions. It is therefore likely that these fuels will have significant impacts in our local environment, if any spills occur.     

Egyptian blue — Cuprorivaite a window to ancient Egyptian technology

Egyptian Blue, a multicomponent synthetic blue pigment has been recorded in ancient Egypt since the Fourth Dynasty of the Old Kingdom (2600–2480 B.C.). The pigment consisting of cuprorivaite (CaCuSi₄O₁₀) with variable amounts of wollastonite (CaSiO₃), Cu-rich glass and cuprite (Cu₃O) or tenorite (CuO) was prepared by melting the copper-rich ingredient with lime and desert sand. Low melting temperatures (below 742 °C) were achieved by addition of flux-like plant ashes. The high quality of the pigments collected from monuments of the Fifth Dynasty (2480–2320 B.C.) may indicate that the first manufacture was in early dynastic or perhaps predynastic eras. During the reign of Thutmosis III (18th Dynasty, 1490–1436 B.C.) probably bronze filings were first applied as starting material, thus indicating a technological innovation. This new method was employed till the Roman times.     

Scale,context, and decision making in agricultural adaptation to climate variability and change

This work presents a framework for viewing agricultural adaptation, emphasizing the multiple spatial and temporal scales on which individuals and institutions process information on changes in their environment. The framework is offered as a means to gain perspective on the role of climate variability and change in agricultural adaptation, and developed for a case study of Australian agriculture. To study adaptation issues at the scale of individual farms we developed a simple modelling framework. The model highlights the decision making element of adaptation in light of uncertainty, and underscores the importance of decision information related to climate variability. Model results show that the assumption of perfect information for farmers systematically overpredicts adaptive performance. The results also suggest that farmers who make tactical planting decisions on the basis of historical climate information are outperformed by those who use even moderately successful seasonal forecast information. Analysis at continental scales highlights the prominent role of the decline in economic operating conditions on Australian agriculture. Examples from segments of the agricultural industry in Australia are given to illustrate the importance of appropriate scale attribution in adapting to environmental changes. In particular, adaptations oriented toward short time scale changes in the farming environment (droughts, market fluctuations) can be limited in their efficacy by constraints imposed by broad changes in the soil/water base and economic environment occuring over longer time scales. The case study also makes the point that adaptation must be defined in reference to some goal, which is ultimately a social and political exercise. Overall, this study highlights the importance of allowing more complexity (limited information, risk aversion, cross-scale interactions, mis-attribution of cause and effect, background context, identification of goals) in representing adaptation processes in climate change studies.     

Surface‐ and deep‐level diversity in workgroups: examining the moderating effects of team orientation and team process on relationship conflict

The increased use of teams in organizations, coupled with an increasingly diverse workforce, strongly suggests that we should learn more about how team diversity affects functioning and performance. The purpose of this study was to explore the differential impact of surface‐level diversity (gender, ethnicity), deep‐level diversity (time urgency, extraversion), and two moderating variables (team orientation, team process) on relationship conflict over time. Hypotheses were tested by tracking 45 student project teams in a longitudinal design. Results revealed that team orientation and team process moderated the diversity–conflict link. Specifically, team orientation helped to neutralize the negative effects of surface‐level (gender) diversity on relationship conflict. In a similar manner, team processes worked to weaken the deleterious effects of deep‐level diversity (time urgency) on relationship conflict. In addition, relationship conflict resulted in lower perceived performance by team members. Copyright © 2004 John Wiley & Sons, Ltd.     

Off-grid: community energy and the pursuit of self-sufficiency in British Columbia's remote and First Nations communities

Remote or off-grid communities in Canada primarily rely on diesel generators for the provision of their electricity. Often surrounded by potential renewable resources, they are characterised as the low-hanging fruit of greenhouse gas mitigation strategies. While much is said about the promises of community energy projects, as well as technologies and policy mechanisms for addressing the needs of these communities, little attention has been paid to what communities, themselves, might want for their energy projects and what the implications of those desires might be for both technology development and community energy policies. This paper aims to fill this gap by exploring the on-going energy pursuits of a number of remote First Nations communities in British Columbia. It identifies a desire for community self-sufficiency as a primary motivation for engaging with energy projects on the part of the communities and discusses the various meanings and implications of self-sufficiency in the context of community energy projects. These meanings and implications primarily include the two dimensions of material self-sufficiency and political self-determination, the latter of which suggests a view of community energy projects as processes of decolonisation among First Nation communities in British Columbia. It then suggests that the pursuit of this goal is somewhat incongruent with the approach that government and industry have taken in addressing community energy, especially the way in which remote communities are viewed as the low-hanging fruit of various sustainability projects.     

Anticancer mechanisms of phytochemical compounds: focusing on epigenetic targets

Environmental Science and Pollution Research - It has recently been proven that epigenetic dysregulation is importantly involved in cell transformation and therefore induces cancerous diseases. The...