Immobilized Fe (III)-doped titanium dioxide for photodegradation of dissolved organic compounds in water

Photocatalytic degradation of dissolved organic carbon (DOC) by utilizing Fe(III)-doped TiO₂ at the visible radiation range is hereby reported. The photocatalyst was immobilized on sintered glass frits with the coating done by wet method, calcinated at 500 °C and then applied in a photodegradation reactor. The addition of a transition metal dopant, Fe(III), initiated the red shift which was confirmed by UV–Vis spectroscopy, and the photocatalyst was activated by visible radiation. X-ray diffraction patterns showed that Fe(III) doping had an effect on the crystallinity of the photocatalysts. Mixtures of DOC and associated coloured solutions were degraded in first-order kinetics, showing that the degradation process was not dependent on intermediates or other species in solution. A reactor with a catalyst coating area of 12.57 cm² was able to degrade 0.623 mg of the dissolved material per minute. Exposure of the reactor to hostile acidic conditions and repeated use did not compromise its efficiency. It was observed that the reactor regenerates itself in the presence of visible light, and therefore, it can be re-used for more than 100 runs before the performance dropped to <95 %. The results obtained indicate that the photocatalyst reactor has a great potential of application for use in tandem with biosorbent cartridges to complement water purification methods for domestic consumption.     

Fluoride removal studies using virgin and Ti (IV)-modified Musa paradisiaca (plantain pseudo-stem) carbons

The preparation of carbons in virgin and Ti-modified forms under controlled conditions at low temperature from plantain pseudo-stem (Musa paradisiaca) was achieved. These prepared carbons were characterized for instrumental studies such as BET, FTIR, XRD, SEM with EDS and TGA to understand the chemistry and modification. The determination of IEP and pH_ZPC established the presence of positive surface sites on the virgin (VMPC) and Ti-modified (TiMPC) carbons to facilitate the sorption of fluoride. The fluoride removal efficiency as a function of time, pH, dose, initial fluoride concentration, temperature, and co-ion intervention was studied. The maximum fluoride removal of about 81.2 and 97.7% was achievable with VMPC and TiMPC, respectively, after 20 min at the pH of 2.04 and continued for the equilibrium of 60 min. Temperature was found to be influential both by way of initial increase followed by a decrease in the fluoride uptake of MPCs. Regeneration was very consistent up to 7 cycles with the residual fluoride concentration below the WHO guide line of 1.5 mg L^?1. Highest intervention due to hydrogen carbonate ions was observed during the fluoride removal process. Kinetic (pseudo-first-order, pseudo-second-order, and intra-particle diffusion) and isotherm models (Langmuir, Freundlich, and DKR) were checked for their compliance with the present sorption system. These low temperature synthesized MPCs are found to be effective candidates in the process of fluoride abatement in water.

     

The simultaneous stripping of arsenic and selenium from wastewaters using hollow-fibre supported liquid membranes

The extraction of total arsenic and selenium using hollow-fibre supported liquid membranes (HFSLMs), with specific interest in the optimal conditions for the extraction in wastewater, is reported. The extraction time, type of liquid membrane, sample and donor pH and stirring rate were optimised, and thereafter, the developed method was tested in real wastewater samples. The optimal HFSLMs adopted, after optimisation tests, comprised of Aliquat 336, 0.8 M NaOH, 200 rpm and 80 min as the extractant, stripping phase, stirring rate and reaction time, respectively. The developed method had reasonable-to-high extraction efficiencies in real wastewater samples with the final effluent recording as high as 73 and 78 % removal efficiencies for Se and As, respectively. Considering the initial concentrations found in the samples, use of this developed method could bring down the concentrations to levels admissible by the United States Environmental Protection Agency (US-EPA) and World Health Organisation (WHO).     

Ion-imprinted polymers for environmental monitoring of inorganic pollutants: synthesis, characterization, and applications

Ion imprinting has become one of the fast-growing technologies that have gained a lot of attention recently especially in the area of materials science. One of them is called the ion-imprinted polymers (IIPs). The IIPs are synthesized on the principles of enzyme phenomenon whereby a polymer is altered by a polymerization that takes place in the presence of a template that will be later removed to create cavities that will recognize only the analyte of interest. This specific and selective affinity for the target species decreases the chances of competition with other different types of ions. The imprinting technique started with the discovery of the bulk polymerization method where by the monomer, initiator, crosslinker, and template are mixed together and allowed to polymerize, and then the resulting polymer is ground and sieved to get particles with sizes suitable for the polymer's application. The IIPs have got some attractive qualities for use in environmental applications which include their stability and inexpensiveness and have a wide range of synthesis options with each suiting a certain unique application. Apart from environmental work, IIPs have applications in many other areas such as in membranes, in drug delivery, and in biosensors as alternatives to antibodies just to mention a few. This review focuses on the synthesis, types of imprinting, characterization, and applications of IIPs.     

Investigating the chromium status,heavy metal contamination,and ecological risk assessment via tannery waste disposal in sub-Saharan Africa (Kenya and South Africa)

Environmental Science and Pollution Research - To mitigate the negative environmental and public health concerns associated with increased industrial discharges amid the rapid industrial growth,...