Critical enablers and inhibitors for economic sustainability in the supply and demand of end-of-life vehicles in Malaysia: a SWOT analysis

Journal of Material Cycles and Waste Management - End-of-life vehicles (ELV) management is essential for sustainable development and waste minimization. However, the ELV recycling companies are...     

Adsorption study of 14C-paraquat in two Malaysian agricultural soils

The adsorption equilibrium time and effects of pH and concentration of ¹⁴C-labeled paraquat (1,1^??-dimethyl-4,4^??-bipyridylium dichloride) in two types of Malaysian soil were investigated. The soils used in the study were clay loam and clay soils from rice fields. Equilibrium studies of paraquat in a soil and pesticide solution were conducted. Adsorption equilibrium time was achieved within 2 h for both soil types. The amount of ¹⁴C-labeled paraquat adsorbed onto glass surfaces increased with increasing shaking time and remained constant after 10 h. It was found that paraquat adsorbed by the two soils was very similar: 51.73 (clay loam) and 51.59 ?? g g^???1 (clay) at 1 ?? g/ml. The adsorption of paraquat onto both types of soil was higher at high pH, and adsorption decreased with decreasing pH. At pH 11, the amounts of ¹⁴C-labeled paraquat adsorbed onto the clay loam and clay soil samples were 4.08 and 4.05 ?? g g^???1, respectively, whereas at pH 2, the amounts adsorbed were 3.72 and 3.57 ?? g g^???1, respectively. Results also suggested that paraquat sorption by soil is concentration dependent.     

Initiating automotive component reuse in Malaysia

As the production of local vehicles increases, the impact of end-of-life vehicles (ELVs) wastes to the environment will also increase. ELVs recovery including reuse, remanufacture, and recycle apparently become a strategy in solving this environmental problem. This study identifies the existing conditions of automotive reuse in Malaysia by conducting some interviews in selected local automotive and automotive component manufacturers. Results from the interviews indicated that reuse of automotive components in newly manufactured vehicles has never been practiced by the selected companies. However, there is interest among respondents in developing automotive components for after-market reuse. Some strategies were proposed in this study to initiate automotive components reuse in the local automotive manufacturers including the establishment of the end-of-life directive, enhance research and development on design for reuse and increase reusability and economic benefits of reuse.     

Potential of microalgae Bio-Coke as a sustainable solid fuel alternative to coal coke

Energy and environmental issues have triggered the search for new sources of green energy alternatives in recent years. Biofuel production from renewable sources is widely considered one of the most sustainable alternatives for environmental and economic sustainability. Microalgae are currently being promoted as one of the most promising liquid biofuel feedstocks due to their rapid growth, high lipid production capacity, and carbon–neutral cycle. In this study, whole microalgae cells were utilized as raw material to produce solid biofuel, i.e., Bio-Coke, and this study aimed to investigate the possibility of microalgae Bio-Coke as an alternative to coal coke. The results show that Bio-Coke can be produced from microalgae in the temperature range of 80–100 °C. The apparent density is between 1.253 and 1.261 g/cm³, comparable to the apparent density of lignocellulosic Bio-Coke. Additionally, the calorific value is higher than the calorific value of lignocellulosic Bio-Coke and within the range of the calorific value of subbituminous coal. Therefore, microalgae Bio-Coke can be utilized to replace coal coke usage in the future.

     

Determination of the herbicide fluroxypyr in oil matrices

The purpose of this study was to develop a method for the determination of fluroxypyr (4-amino-3,5-dichloro-6-fluro2-pyridyloxyacetic acid) residue in palm oil namely crude palm oil (CPO) and crude palm kernel oil (CPKO). The method involves the extraction of the herbicide from the oil matrix followed by low temperature precipitation and finally quantification of the residues using the high performance liquid chromatography (HPLC). The extraction efficiency of the method was evaluated by conducting recovery studies. The recovery of fluroxypyr from the fortified CPO samples ranged from 78%-111% with the relative values for the coefficient of variation ranging from 1.4 to 8.6%. Furthermore, the recovery of fluroxypyr from the spiked CPKO samples ranged from 91-107% with the relative values for the coefficient of variation ranging from 0.6 to 4.5%. The minimum detection limit of fluroxypyr in CPO and CPKO was 0.05 microg/g. The method was used to determine fluroxypyr residues from the field-treated samples of CPO and CPKO. When fluroxypyr was used for weed control in oil palm plantations no residue was detected in CPO and CPKO irrespective of the sampling interval and the dosage applied at the recommended or double the manufacturer's recommended dosage.     

A review on bisphenol A occurrences,health effects and treatment process via membrane technology for drinking water

Massive utilization of bisphenol A (BPA) in the industrial production of polycarbonate plastics has led to the occurrence of this compound (at μg/L to ng/L level) in the water treatment plant. Nowadays, the presence of BPA in drinking water sources is a major concern among society because BPA is one of the endocrine disruption compounds (EDCs) that can cause hazard to human health even at extremely low concentration level. Parallel to these issues, membrane technology has emerged as the most feasible treatment process to eliminate this recalcitrant contaminant via physical separation mechanism. This paper reviews the occurrences and effects of BPA toward living organisms as well as the application of membrane technology for their removal in water treatment plant. The potential applications of using polymeric membranes for BPA removal are also discussed. Literature revealed that modifying membrane surface using blending approach is the simple yet effective method to improve membrane properties with respect to BPA removal without compromising water permeability. The regeneration process helps in maintaining the performances of membrane at desired level. The application of large-scale membrane process in treatment plant shows the feasibility of the technology for removing BPA and possible future prospect in water treatment process.     

Microbial and chemical markers: runoff transfer in animal manure-amended soils

Fecal contamination of water resources is evaluated by the enumeration of the fecal coliforms and Enterococci. However, the enumeration of these indicators does not allow us to differentiate between the sources of fecal contamination. Therefore, it is important to use alternative indicators of fecal contamination to identify livestock contamination in surface waters. The concentration of fecal indicators (, enteroccoci, and F-specific bacteriophages), microbiological markers (Rum-2-bac, Pig-2-bac, and ), and chemical fingerprints (sterols and stanols and other chemical compounds analyzed by 3D-fluorescence excitation-matrix spectroscopy) were determined in runoff waters generated by an artificial rainfall simulator. Three replicate plot experiments were conducted with swine slurry and cattle manure at agronomic nitrogen application rates. Low amounts of bacterial indicators (1.9-4.7%) are released in runoff water from swine-slurry-amended soils, whereas greater amounts (1.1-28.3%) of these indicators are released in runoff water from cattle-manure-amended soils. Microbial and chemical markers from animal manure were transferred to runoff water, allowing discrimination between swine and cattle fecal contamination in the environment via runoff after manure spreading. Host-specific bacterial and chemical markers were quantified for the first time in runoff waters samples after the experimental spreading of swine slurry or cattle manure.     

End-of-life vehicles research development in Malaysia: a comprehensive review with the integrated conceptual model of innovative sustainable manufacturing elements

Journal of Material Cycles and Waste Management - The end-of-life vehicles (ELV) issue has become an essential topic in the fast-growing automotive industry. This study utilizes comprehensive...