Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation

● Properties and performance relationship of CSBT photocatalyst were investigated. ● Properties of CSBT were controlled by simply manipulating glycerol content. ● Performance was linked to semiconducting and physicochemical properties. ● CSBT (W:G ratio 9:1) had better performance with lower energy consumption. ● Phenols were reduced by 48.30% at a cost of $2.4127 per unit volume of effluent. Understanding the relationship between the properties and performance of black titanium dioxide with core-shell structure (CSBT) for environmental remediation is crucial for improving its prospects in practical applications. In this study, CSBT was synthesized using a glycerol-assisted sol-gel approach. The effect of different water-to-glycerol ratios (W:G = 1:0, 9:1, 2:1, and 1:1) on the semiconducting and physicochemical properties of CSBT was investigated. The effectiveness of CSBT in removing phenolic compounds (PHCs) from real agro-industrial wastewater was studied. The CSBT synthesized with a W:G ratio of 9:1 has optimized properties for enhanced removal of PHCs. It has a distinct core-shell structure and an appropriate amount of Ti³⁺ cations (11.18%), which play a crucial role in enhancing the performance of CSBT. When exposed to visible light, the CSBT performed better: 48.30% of PHCs were removed after 180 min, compared to only 21.95% for TiO₂ without core-shell structure. The CSBT consumed only 45.5235 kWh/m³ of electrical energy per order of magnitude and cost $2.4127 per unit volume of treated agro-industrial wastewater. Under the conditions tested, the CSBT demonstrated exceptional stability and reusability. The CSBT showed promising results in the treatment of phenols-containing agro-industrial wastewater.     

Characterization of polychlorinated biphenyls and brominated flame retardants in surface soils from Surabaya, Indonesia

In this study, soil contamination by PCBs, PBDEs, HBCDs and two novel BFRs such as 1,2-bis-(2,4,6-tribromopenoxy) ethane (BTBPE) and decabromodiphenyl ethane (DBDPE) in various locations such as industrial, urban, rural, dumping site and agricultural areas of Surabaya, Indonesia has been characterized in order to evaluate their contamination status, profiles, potential sources, fate and behavior. Range and median concentrations of PCBs, PBDEs, HBCDs, BTBPE and DBDPE were ND - 9.6 (1.2), 0.069 - 24 (7.4), ND - 1.8 (0.48), ND - 1.7 (0.14) and ND - 7.6 (2.2) ng g⁻¹ dw, respectively. Industrial, urban and dumping areas were inventoried as the main sources of these pollutants. Decreasing gradient levels were observed for these contaminants from industrial district, urban, dumping site, rural and agricultural areas, in that order. Furthermore, organic carbon contents and proximity to the point sources were found as the major controlling factors. Contaminant profiles were characterized by the predominance of hexa-, hepta- and penta-homologues for PCBs; deca-, nona- and octa- for PBDEs and α-isomer for HBCDs. Product mixtures such as Ar1260/KC600 and Ar1254/KC500 for PCBs, deca- and octa-BDEs for PBDEs were the possible common formulations used in study area. To our knowledge, this is a first comprehensive study on characterization of soil contamination by PCBs, PBDEs and HBCDs together with two novel BFRs in a highly industrialized city located in tropical region. This study provides baseline information for establishing national monitoring programs in Indonesia.     

Effect of foreign direct investment on CO2 emission with the role of globalization,institutional quality with pooled mean group panel ARDL

Environmental Science and Pollution Research - This study utilized the Pooled Mean Group estimator to investigate the effect of renewable energy consumption, electricity consumption, economic...     

The role of technology innovation and people’s connectivity in testing environmental Kuznets curve and pollution heaven hypotheses across the Belt and Road host countries: new evidence from Method of Moments Quantile Regression

Environmental Science and Pollution Research - The Belt and Road Initiative (BRI) is closely linked to the ecological sustainability of the infrastructure ventures that intrinsically include the...     

Degradation of polyacrylamide (PAM) and methane production by mesophilic and thermophilic anaerobic digestion: Effect of temperature and concentration

• PAM degradation in thermophilic AD in comparison with mesophilic AD. • PAM degradation and its impact on thermophilic and mesophilic AD. • Enhanced methane yield in presence of PAM during thermophilic and mesophilic AD. • PAM degradation and microbial community analysis in thermophilic and mesophilic AD. Polyacrylamide (PAM) is generally employed in wastewater treatment processes such as sludge dewatering and therefore exists in the sludge. Furthermore, it degrades slowly and can deteriorate methane yield during anaerobic digestion (AD). The impact or fate of PAM in AD under thermophilic conditions is still unclear. This study mainly focuses on PAM degradation and enhanced methane production from PAM-added sludge during 15 days of thermophilic (55°C) AD compared to mesophilic (35°C) AD. Sludge and PAM dose from 10 to 50 g/kg TSS were used. The results showed that PAM degraded by 76% to 78% with acrylamide (AM) content of 0.2 to 3.3 mg/L in thermophilic AD. However, it degraded only 27% to 30% with AM content of 0.5 to 7.2 mg/L in mesophilic AD. The methane yield was almost 230 to 238.4 mL/g VSS on the 8th day in thermophilic AD but was 115.2 to 128.6 mL/g VSS in mesophilic AD. Mechanism investigation revealed that thermophilic AD with continuous stirring not only enhanced PAM degradation but also boosted the organics release from the sludge with added PAM and gave higher methane yield than mesophilic AD.     

Comparative efficacy of mitigation techniques for the detoxification of Prunus persica (L.) from selected pesticide residues

Environmental Science and Pollution Research - Fruits are the valuable and important components of human diet. Among them, Prunus persica is a rich source of different minerals and dietary fibers....     

Bacterial-mediated synthesis of silver nanoparticles and their significant effect against pathogens

Environmental Science and Pollution Research - Silver nanoparticles are potent antimicrobials and could be used as a promising alternative of conventional antibiotics. The aim of this study was to...     

Environmental concerns and switching toward electric vehicles: geographic and institutional perspectives

Environmental Science and Pollution Research - Smog pollution deteriorates environmental quality and has severe health risks. This affects the daily lives of people in China, particularly in urban...     

The effect of nutrients shortage on plant’s efficiency to capture solar radiations under semi-arid environments

Radiation use efficiency (RUE) is considered critical for calculation of crop yield. The crop productivity can be improved by increasing the interception of solar radiation and maintaining higher RUE for plants. Irrigation water and nitrogen (N) supply are the main limiting factors for RUE in maize (Zea mays L.) across the semi-arid environments. Field experiments were conducted during two consecutive growing seasons (2009–2010) to optimize RUE in relation to N application timings and rates with varying irrigation water management practices. In experiment 1, three N application timings were made, while in experiment 2, three possible water management practices were used. In both experiments, five N rates (100, 150, 200, 250, and 300 kg N ha⁻¹) were applied to evaluate the effects of irrigation water and N on cumulative photosynthetic active radiation (PARi), dry matter RUE (RUE_DM), and grain yield RUE (RUE_GY). The results demonstrated that cumulative PARi and RUEs were not constant during the plant growth under varying the nutrients. The water and N significantly influenced cumulative PARi and RUEs during the both growing seasons. In experiment 1, the maximum cumulative PARi was observed by application of 250 kg N ha⁻¹ in three splits (1/3 N at V2, 1/3 N at V16, and 1/3 N at R1 stage), and the highest RUE_DM was achieved by the application of 300 kg N ha⁻¹. However, the highest RUE_GY was observed by application of 250 kg N ha⁻¹. In experiment 2, the maximum cumulative PARi was attained at normal irrigation regime with 250 kg N ha⁻¹, while the highest RUE_DM and RUE_GY were recorded at normal irrigation regime with the application of 300 kg N ha⁻¹. The regression analysis showed significant and positive correlation of RUE_GY with grain yield. Therefore, optimum water and N doses are important for attaining higher RUE, which may enhance maize grain yield semi-arid environment; this may be considered in formulating good agricultural practices for the environmental conditions resembling to those of this study.

     

Influence of sub-lethal crude oil concentration on growth,water relations and photosynthetic capacity of maize (Zea mays L.) plants

Environmental Science and Pollution Research - Maize tolerance potential to oil pollution was assessed by growing Zea mays in soil contaminated with varying levels of crude oil (0, 2.5 and...