Feasibility study of a passive aeration reactor equipped with vertical pipes for compost stabilization of cow manure.

Pilot-scale composting was carried out with cow manure to evaluate the performances of two passive aeration systems: a conventional passive aeration system equipped with horizontal pipes and an unusual passive aeration method based on air delivery by means of vertical pipes. The effects of both types of passive aeration apparatus were investigated in order to determine the degree of composting rate by continuously monitoring temperature, moisture content, organic matter, electrical conductivity, pH and C/N ratio in the piles. Temperatures in the range of thermophily (55-65 degrees C) were reached in all runs within 1-2 days then lasting for about 1 week, a span long enough for pathogen abatement. Results suggest that passive aeration carried out by vertical pipes is more effective for air delivery into compost piles than conventional passive aeration of air adduction with horizontal pipes. The variation in the number of vertical pipes was revealed to be an important parameter for the control of composting rate and temperature. Composting rates estimated from the heat balance equation were substantially in agreement with those computed through the conversion ratio of total organic matter decrement. The conversion ratios and composting rates obtained in this study using passive aeration with vertical pipes were well aligned with those found using forced air delivery systems.     

Effectiveness of resistivity monitoring for interpreting temporal changes in landfill properties

It is always possible for impermeable layers to exist in landfills. When they do, the properties of the solution at the exit of the leachate-collection system might not accurately reflect the overall properties of the landfill. This study examines whether resistivity monitoring is effective for determining the influence of impermeable layers on the leachate. The test cell used in this study was filled with waste made up mainly of incinerator ash and shredded incombustible material. Three lines of resistivity sensors were laid in the uppermost layer of the fill. A resistivity profile was recorded periodically from each of these lines. The water-table level and leachate properties were measured concurrently. Leachate conductivity was mainly controlled by concentrations of the main ions, and it correlated inversely to variations in resistivity. Temporal changes in the resistivity of the fills are an excellent means of assessing the leaching in fills. Monitoring the properties of leachate, combined with resistivity profiling, is extremely useful for interpreting the temporal changes of properties in landfills containing impermeable layers.     

Trace elements and stable isotopes (delta13C and delta15N) in shallow and deep-water organisms from the East China Sea

Trace elements (22) and stable isotope ratios (δ¹⁵N and δ¹³C) were analyzed in marine organisms from shallow (SW) and deep-water (DW) of the East China Sea to understand biomagnification and prey source of trace elements. In the benthic marine organisms from DW, δ¹⁵N values were negatively correlated with Ba, Cu, Ag, Mo, Sr, As, and Co concentrations. This may be due to the specific accumulation in lower trophic animals and/or the biodilution through the food web in DW. Relationships between δ¹⁵N and concentrations of Co, Cr, Bi, and Tl in fish and Ag, Bi, V, Hg, and Tl in crustaceans showed positive correlations, suggesting that trophic position was affecting the concentrations of those elements in phyla, with higher trophic animals retaining higher concentrations than the lower trophic animals. Positive correlations between δ¹³C and Rb were observed in marine organisms. Therefore, Rb may be a possible substitute of δ¹³C as tracer of prey source in the East China Sea although further investigation is required.     

Effect of acid solutions on plants studied by the optical beam deflection method

The optical beam deflection method was applied to study the effects of acid solution on both a terrestial and aquatic plants Egeria and Cerastium, which are common aquatic plant and terrestial weed respectively. A probe beam from a He-Ne laser was passed through a vicinity of a leaf of the plants, which were put in culture dishes filled with acid solutions. Deflection signals of the probe beam were monitored and compared for acid solutions with different pH values. The results of Egria showed that the deflection signals changed dramatically when pH values of acid solutions were 2.0 and 3.0, while little at pH of 4.0 and 5.0. For Cerastium when pH were below 3.0, deflection signals changed greatly with time at the begining. After a certain period of time, deflection signals changed little with time. When pH value was above 4.0, deflection signals of Cerastium were still changing with time even after 20 hours. The results suggested that the damage threshold of pH was between 3.0 and 4.0 for both the land and aquatic plants.     

Carbon black nanoparticles promote the maturation and function of mouse bone marrow-derived dendritic cells

Particulate matter including carbon black (CB) nanoparticles can enhance antigen-related inflammation and immunoglobulin production in vivo. Dendritic cells (DC) as antigen-presenting cells (APC) are the most capable inducers of immune responses. The present study was designed to determine whether CB nanoparticles affect the maturation/activation and function of DC in vitro. DC were differentiated from bone marrow (BM) cells of BALB/c mice by culture with granulocyte macrophage colony stimulating factor (GM-CSF). At day 8 of culture, BM-derived DC (BMDC) were exposed to CB nanoparticles with a diameter of 14nm or 56nm for 24h. The expression of major histocompatibility complex (MHC) class II, DEC205, CD80, and CD86 (maturation/activation markers of BMDC) was measured by flow cytometry. BMDC function was evaluated by an allogeneic mixed lymphocyte reaction (MLR) assay. CB nanoparticles significantly increased the expression of DEC205 and CD86 in BMDC and tended to increase MHC class II and CD80 expression; however, a size-dependent effect was not observed. On the other hand, BMDC-mediated MLR was significantly enhanced by the CB nanoparticles and the enhancement was greater by 14nm CB nanoparticles than by 56nm CB nanoparticles. Taken together, CB nanoparticles can promote the maturation/activation and function of BMDC, which could be related to their effects on allergic diseases and/or responses. In addition, BMDC-mediated MLR might be useful assay for in vitro screening for adjuvant activity of environmental toxicants.     

Reduction of hazardous elements contained in sewage sludge incineration ash

Research and experimental studies were carried out in relation to reduction of hazardous elements contained in sewage sludge incineration ash. A questionnaire survey was conducted in 69 Japanese municipalities with sewage sludge incineration facilities. Selenium content in bag filter ash and ceramic filter ash was relatively higher than that in ash of cyclone and electrostatic precipitators. It was assumed that selenium vaporized in the furnace was due to adsorb in the fly ash on filter when passing through the low-temperature filter. To reduce high boiling point heavy metals in the ash, sewage sludge and incineration ash were heated up using a small muffle furnace. As the result, the chrome and nickel contents were reduced. A decrease in the surface area of ash and the reduction of elements occurred at the same time in sewage sludge and incineration ashes tested in this study.     

Genetic engineering of cyanobacteria to enhance biohydrogen production from sunlight and water

To mitigate global warming caused by burning fossil fuels, a renewable energy source available in large quantity is urgently required. We are proposing large-scale photobiological H(2) production by mariculture-raised cyanobacteria where the microbes capture part of the huge amount of solar energy received on earth's surface and use water as the source of electrons to reduce protons. The H(2) production system is based on photosynthetic and nitrogenase activities of cyanobacteria, using uptake hydrogenase mutants that can accumulate H(2) for extended periods even in the presence of evolved O(2). This review summarizes our efforts to improve the rate of photobiological H(2) production through genetic engineering. The challenges yet to be overcome to further increase the conversion efficiency of solar energy to H(2) also are discussed.     

Extraction of raw sewage sludge containing iron phosphate for phosphorus recovery

The objective of the present study was to establish an alkali extraction technology for FePO₄-containing sewage sludge obtained from a wastewater treatment system that includes phosphorous removal by iron electrolysis. By clarifying the extraction properties of phosphorous, organic matter, and inorganic matter, conditions for alkali extraction were optimized. As a result, it was suggested that unheated phosphorous extraction would be superior for FePO₄-containing sewage sludge. And, extraction methods and sewage sludge properties were also compared, and the noteworthy result that extraction of metals can be suppressed to extremely low amounts with alkali extraction as compared with acid extraction was obtained. A new insight was also gained that, as compared with the use of incinerated ash reported in previous studies, alkali extraction was more efficient when raw sewage sludge was used.     

Detection of dicofol and related pesticides in human breast milk from China, Korea and Japan

Previously, we demonstrated that the concentrations of DDTs were greater in breast milk collected from Chinese mothers than from Japanese and Korean mothers. To investigate dicofol as a possible source of the DDTs in human breast milk, we collected breast milk samples from 2007 to 2009 in China (Beijing), Korea (Seoul, Busan) and Japan (Sendai, Takarazuka and Takayama). Using these breast milk samples, we quantified the concentrations of dichlorobenzophenone, a pyrolysis product of dicofol (simply referred to as dicofol hereafter), dichlorodiphenyltrichloroethane and its metabolites (DDTs) using GC-MS. Overall, 12 of 14 pooled breast milk samples from 210 mothers contained detectable levels of dicofol (>0.1 ng g⁻¹ lipid). The geometric mean concentration of dicofol in the Japanese breast milk samples was 0.3 ng g⁻¹ lipid and significantly lower than that in Chinese (9.6 ng g⁻¹ lipid) or Korean breast milk samples (1.9 ng g⁻¹ lipid) (p < 0.05 for each). Furthermore, the ΣDDT levels in breast milk from China were 10-fold higher than those from Korea and Japan. The present results strongly suggest the presence of extensive emission sources of both dicofol and DDTs in China. However, exposure to dicofol cannot explain the large exposure of Chinese mothers to DDTs because of the trace levels of dicofol in the ΣDDTs. In the present study, dicofol was confirmed to be detectable in human breast milk. This is the first report to identify dicofol in human samples.     

Analysis of high-level waste glass performance by the physical and geochemical simulation code STRAG4

A source term release analysis code for high-level waste glass has been developed for simulation of long-term dissolution behavior under repository conditions. The STRAG4 code consists of models for (a) element diffusion in both the bulk glass and surface layer, (b) glass dissolution kinetics at the interface between glass and water, and (c) geochemical reactions of dissolved elements in underground water. The simulations for various conditions of glass dissolution, including a static and dynamic system, show accordance with the experimental observations even in the relatively complicated case where bentonite is present. Long-term dissolution analyses of a borosilicate waste glass were carried out as preliminary study. The calculations were achieved by considering detrimental effects due to interactions between the glass and surrounded materials which are presumed to be in a repository environment (i.e., compacted bentonite, corrosion products from the iron overpack, and underground water). The environmental conditions such as temperature and geochemical reactions are also taken into account in the calculations. The results suggest the life of the waste glass would be more than 50,000 years even if the glass surface area increased by a factor of 10 due to crack formation.