Testing the impact of real interest rate,income, and energy consumption on Turkey’s CO2 emissions

Environmental Science and Pollution Research - This paper aims to explore the impact of real interest rates (RIN), income, trade, foreign direct investment (FDI), and energy consumption on...     

Potential use of thermophilic dark fermentation effluents in photofermentative hydrogen production by Rhodobacter capsulatus

Biological hydrogen production by a sequential operation of dark and photofermentation is a promising route to produce hydrogen. The possibility of using renewable resources, like biomass and agro-industrial wastes, provides a dual effect of sustainability in biohydrogen production and simultaneous waste removal. In this study, photofermentative hydrogen production on effluents of thermophilic dark fermentations on glucose, potato steam peels (PSP) hydrolysate and molasses was investigated in indoor, batch operated bioreactors. An extreme thermophile Caldicellulosiruptor saccharolyticus was used in the dark fermentation step, and Rhodobacter capsulatus (DSM1710) was used in the photofermentation step. Addition of buffer, Fe and Mo to dark fermentor effluents (DFEs) improved the overall efficiency of hydrogen production. The initial acetate concentration in the DFE needed to be adjusted to 30–40 mM by dilution to increase the yield of hydrogen in batch light-supported fermentations. The thermophilic DFEs are suitable for photofermentative hydrogen production, provided that they are supplemented with buffer and nutrients. The overall hydrogen yield of the two-step fermentations was higher than the yield of single step dark fermentations.     

Hair burning and liming in tanneries is a source of pollution by arsenic,lead, zinc,manganese and iron

Heavy metals in the environment may be toxic for human and animals. Tanneries are a source of pollution by heavy metals. There is little information on heavy metals pollution in tanneries, especially on metals produced by the process of hair burning and liming. Liming is the first stage of chemical treatment where animal hair or wool is removed with sodium sulphide and calcium oxide. Here we studied cow, goat, buffalo and sheep hair, conventional liming agents and liming wastewaters from several sources. Samples were acid-digested and aliquots were analysed by atomic absorption spectroscopy following APHA standard method to measure concentrations of arsenic, lead, cadmium, zinc, manganese and iron. Results show that the range of metal contents in hair or wool and liming agents are 1.3–8.2 mg/kg for arsenic, 0.02–21.8 mg/kg for lead, 17.7–121.0 mg/kg for manganese, 7.3–141.1 mg/kg for zinc and 119.6–10613.8 mg/kg for iron. Liming wastewaters contain 1.9–5.6 µg/L arsenic, 0.03–6.05 µg/L lead, 38.6–139.0 µg/L manganese, 144.0–171.5 µg/L zinc and 399.5–1069.0 µg/L iron. Cadmium was below detection limits. This is the first investigation that reveals that hair burning liming operation is a potential source of heavy metals in the environment.     

Monitoring the impacts of urbanization and industrialization on the agricultural land and environment of the Torbali, Izmir region, Turkey

The aim of this research is to determine agricultural land loss and environmental pollution caused by industrialization and urban sprawl using the Geographical Information System (GIS) and Remote Sensing technique (RS). Remotely sensed data is the most powerful tool for monitoring land use changes and GIS is the best way to store and reproduce various kinds of integrated data. Considering the rapid increase of population the loss of fertile agricultural soils is a very dangerous situation for the future of the country. Thus, people are living in the cities in (with adverse) conditions of insufficient drinking water, infrastructure problems, inadequate landscape and many unsolved (extreme) environmental problems. During the last 36 years, unplanned urbanization and industrialization have led to the use of agricultural areas for non-agricultural purposes in the Torbali (Izmir) region, which has the most fertile soils of the Aegean Region. Within this study, a database was created on the parameters of land loss and environmental pollution by means of field observation, interpretation of satellite images (ASTER), aerial photos(1/25.000 scale), topographic map ,soil map, and 1/5.000 scale cadastral map. Results of previous researches and the archives of Torbali municipality were used as ancillary data. In the research, urbanization and industrialization of the town was studied by (using) GIS and RS between 1965 and 2001. Since 1965, 4.742.357 m² agricultural land, mostly of first and second land use capability classes, has been lost due to unplanned urban and industrial developments. Urbanization and industrialization involved an area of which 58% was being used as irrigated lands, 25 % rain feed (rain fed lands)and 17 % for olive growing.     

Utilization of waste glass in ECO-cement: strength properties and microstructural observations

Waste glass creates a serious environmental problem, mainly because of the inconsistency of the waste glass streams. The use of waste glass as a finely ground mineral additive (FGMA) in cement is a promising direction for recycling. Based on the method of mechano-chemical activation, a new group of ECO-cements was developed. In ECO-cement, relatively large amounts (up to 70%) of portland cement clinker can be replaced with waste glass. This report examines the effect of waste glass on the microstructure and strength of ECO-cement based materials. Scanning electron microscopy (SEM) investigations were used to observe the changes in the cement hydrates and interface between the cement matrix and waste glass particles. According to the research results, the developed ECO-cement with 50% of waste glass possessed compressive strength properties at a level similar to normal portland cement.     

An ecotoxicological view on neurotoxicity assessment

The numbers of potential neurotoxicants in the environment are raising and pose a great risk for humans and the environment. Currently neurotoxicity assessment is mostly performed to predict and prevent harm to human populations. Despite all the efforts invested in the last years in developing novel in vitro or in silico test systems, in vivo tests with rodents are still the only accepted test for neurotoxicity risk assessment in Europe. Despite an increasing number of reports of species showing altered behaviour, neurotoxicity assessment for species in the environment is not required and therefore mostly not performed. Considering the increasing numbers of environmental contaminants with potential neurotoxic potential, eco-neurotoxicity should be also considered in risk assessment. In order to do so novel test systems are needed that can cope with species differences within ecosystems. In the field, online-biomonitoring systems using behavioural information could be used to detect neurotoxic effects and effect-directed analyses could be applied to identify the neurotoxicants causing the effect. Additionally, toxic pressure calculations in combination with mixture modelling could use environmental chemical monitoring data to predict adverse effects and prioritize pollutants for laboratory testing. Cheminformatics based on computational toxicological data from in vitro and in vivo studies could help to identify potential neurotoxicants. An array of in vitro assays covering different modes of action could be applied to screen compounds for neurotoxicity. The selection of in vitro assays could be guided by AOPs relevant for eco-neurotoxicity. In order to be able to perform risk assessment for eco-neurotoxicity, methods need to focus on the most sensitive species in an ecosystem. A test battery using species from different trophic levels might be the best approach. To implement eco-neurotoxicity assessment into European risk assessment, cheminformatics and in vitro screening tests could be used as first approach to identify eco-neurotoxic pollutants. In a second step, a small species test battery could be applied to assess the risks of ecosystems.     

Sources of polycyclic hydrocarbons and pesticides in soluble fraction of deposition samples in Kocaeli,Turkey

A wet–dry deposition sampler was located at The Scientific and Technological Research Council of Turkey-National Metrology Institute (TUBITAK-UME) station, and a bulk deposition sampler was placed at the Kad?ll? village to determine the atmospheric deposition flux of polycyclic aromatic hydrocarbons (PAHs) and pesticides (organochlorine and organophosphorus) in soluble fraction of samples in Kocaeli, Turkey. The 28 samples for each wet, dry, and total deposition were collected weekly from March 2006 to March 2007. Gas chromatography-tandem mass spectrometry was used to analyze the samples which were prepared by using solid-phase extraction (SPE) method. The sum of volume weighted mean of deposition fluxes was obtained as 7.43 μg m^?2 day^?1 for wet deposition, 0.28 μg m^?2 day^?1 for dry deposition and 0.54 μg m^?2 day^?1 for bulk deposition samples for PAHs and 9.88 μg m^?2 day^?1 for wet deposition, 4.49 μg m^?2 day^?1 for dry deposition, and 3.29 μg m^?2 day^?1 for bulk deposition samples for pesticides. While benzo(a)anthracene had the highest fluxes among PAH compounds for all types of depositions, guthion and phosphamidon had the highest deposition flux compared with the other pesticides. Benzo(ghi)perylene, dibenz(a,h)anthracene, indeno(1,2,3-c,d)pyrene, benzo(a)pyrene, and acenaphthene were not detected in any of the samples. Beta-HCH, gamma-HCH, and endrin aldehyde were the only compounds among 18 organochlorine pesticides to be detected in all deposition samples. The main sources of pesticides were the high number of greenhouses around the sampling stations. However, all of the organophosphorus pesticides were detected in all deposition samples. The pollution sources were identified as coal and natural gas combustion, petrogenic sources, and traffic for TUBITAK-UME station whereas coal and natural gas combustion and traffic were the main sources for Kad?ll? station by considering the results of factor analysis, ratios, and wind sector analysis.