Monitoring of Phenol in Wastewater Bioremediation by HPLC

Bioremediation emphasizes the detoxification and destruction of toxic substances by microorganisms. Wastewater obtained from an industrial concern was solvent extracted with methyl alcohol and dichloromethane and analysed by GC/MS. Besides phenol, a large variety of organic compounds were detected. Under controlled laboratory conditions, the wastewater was innoculated with a mixed culture of microorganisms specially selected for their abilities to degrade phenol. Samples were collected at regular intervals from the stirred tank bioreactor and analysed for phenol by reverse phase HPLC with a C18 column. Results shows that from an initial phenol concentration of 987 ppm, slightly more than 50% was destroyed within 163 hours. The dry weight of the microorganisms and the plate count (CFU/ml) shows a steady increase from 0.5238 gms to 0.5355 gms and from 1.1E+9 to 1.94E+13 respectively over the same period. This suggested that the phenol was consumed by the microorganisms as the sole carbon source.     

Pesticide dissipation curves in peach, pear and tomato crops in Uruguay

Dissipation curves of azoxystrobin and of the neonicotinoids acetamiprid and thiacloprid in peach; azinphos-methyl and carbaryl in pear and azoxystrobin, chlorfenapyr and chlorpyrifos in high-tunnel tomato crops were studied in the Southern region of Uruguay. An analytical methodology based on solid phase extraction (SPE) and detection by High Performance Liquid Chromatography with Diode Array Detector (HPLC/DAD) was used for acetamiprid and thiacloprid. Coupled SPE and detection by Gas Chromatography with Mass Selective Detector (GC/MSD) was used for the detection of azinphos-methyl, azoxystrobin, carbaryl, chlorfenapyr and chlorpyrifos residues. Curves were modeled mathematically with Solver program of Microsoft Excel. The best fit for acetamiprid and thiacloprid in peach was achieved with the exponential model (r(2)=0.961 and 0.944, respectively). In the case of peach fruits there is not a Maximum Residue Limit (MRL) for acetamiprid in the Codex Alimentarius, while 0.5 mg/kg is the value rated for thiacloprid. The MRLs accepted by the European Union (EU) are 0.1 mg/kg for acetamiprid and 0.3 mg/kg for thiacloprid. According to the curves determined in these experiments, thiacloprid residues 10 to 12 days after application (daa) were below the MRLs established by both sources. In the case of acetamiprid, 25 daa would be required, according to the exponential mathematical model, to get residues levels below the MRL values established by the EU. For azinphos methyl in pear, the residues detected were mathematically fitted to an exponential model (r(2)=0.999). According to it, residue levels under the MRL established by the EU (0.05 mg/kg) are gotten in our conditions in 20 daa. In plastic tunnel tomato chlorfenapyr residues were not detected from 16 daa, having the dissipation curve an exponential trend. In the same condition, there was not a decay of the azoxystrobin concentration during a 24-day trial, being it around 0.40 ± 0.05 mg/kg.     

Destruction of Volatile Organic Compounds Using Catalytic Oxidation

Catalytic oxidation is an air pollution control technique in which volatile organic compounds (VOCs) and vapor-phase air toxics in an air emission stream are oxidized with the help of a catalyst Design of catalytic systems for control of point source emissions is based on stream-specific characteristics and desired control efficiency. This paper discusses the key emission stream characteristics and VOC characteristics that affect the applicability of catalytic oxidation. The application of catalytic oxidation technology to four types of air emission sources is discussed: (1) groundwater stripping operations; (2) graphic arts facilities; (3) flexographic printing plants; and (4) latex monomer production. The characteristics of each of these emissions are discussed along with the catalytic technology used to control these emissions.     

Effects of bisphenol A on energy balance and accumulation in brown adipose tissue in rats

Some environmental contaminants have the potential to affect humans or animals by mimicking the effects of hormones. Bisphenol A (BPA) is a weak estrogen agonist when tested using in vitro or in vivo bioassays. In addition to the well documented effects of estrogens on reproductive functions, ovarian hormones also have salient effects on mammalian energy balance and feeding behavior. In this study, we investigated the effects of BPA on body weight and food intake of ovariectomized adult female rats. Treatment with doses of 4 or 5 mg/day for 15 days resulted in a significant reduction of body weight gain with no reduction in food intake. A dose of 1 mg/day did not affect feeding or weight gain. BPA was detected in the blood, brain and adipose tissues of the BPA-treated animals but not in the vehicle control group. There was a preferential concentration of BPA in brown adipose tissue. These results indicate that BPA can affect energy balance and that brown adipose tissue may be a primary tissue into which BPA accumulates in mammals.     

Measuring RNA:DNA ratios in individual <Emphasis Type="Italic">Acartia tonsa</Emphasis> (Copepoda)

Acartia tonsa Dana is a dominant copepod in coastal waters and is therefore an important link in the food web between microplankton and higher trophic levels. RNA:DNA ratios have been used to describe growth and nutritional condition of field-collected copepods and to show strong correlation between RNA:DNA ratios and group egg production (EP). A method was developed using a sensitive, nucleic acid-specific fluorescent dye, and automated microplate fluorometer to measure DNA, RNA, and the RNA:DNA ratio of individual A. tonsa. DNA, RNA, and RNA:DNA ratios and EP were all significantly higher in copepods fed Thalassiosira sp. compared to starved copepods. There was a general trend toward an increase in RNA:DNA ratios with increase in EP, but due to the high degree of variation in both RNA:DNA ratios and EP among individual copepods there was no significant correlation between RNA:DNA ratios and EP. Significant differences in RNA:DNA ratios between fed (7.2) and starved (3.3) copepods were found after 2 days. This assay may be applied to other species of copepods sampled in the field to provide an index of the health of planktonic food webs.     

An Empirical Model to Predict Styrene Emissions from Fiber-Reinforced Plastics Fabrication Processes

ABSTRACT

Styrene is a designated hazardous air pollutant, per the 1990 Clean Air Act Amendments. It is also a tropospheric ozone precursor. Fiber-reinforced plastics (FRP) fabrication is the primary source of anthropogenic styrene emissions in the United States. This paper describes an empirical model designed to predict styrene emission factors for selected FRP fabrication processes. The model highlights 10 relevant parameters impacting styrene emission factors for FRP processes, and helps identify future areas of FRP pollution prevention (P2) research. In most cases, the number of these parameters with greatest impact on styrene emission factors can be limited to four or five. Seven different emission studies were evaluated and used as model inputs.     

Elaphoidella grandidieri (Harpacticoida: Copepoda): demographic characteristics and possible use as live prey in aquaculture

In freshwater ecosystems, rotifers and cladocerans are ideal prey for fish larvae whereas copepods, due to their purported low growth rate and predatory tendency, are not. We recently isolated the parthenogenetic Elaphoidella grandidieri (Gueme et Richard, 1893) a benthic freshwater harpacticoid, from a fish farm in the State of Morelos, central Mexico and tested its potential as a live prey organism for larval vertebrates. Population growth and life table demography experiments were conducted, in 100 ml recipients with 50 ml of test medium on a diet of Scenedesmus acutus at a density of 1.0 X 10(6) cell ml(-1); the former on live algae alone while the latter on live algae as well as detritus. We also conducted experiments to document the prey preference for this copepod by the larval Ameca splendens (Pisces: Goodeidae) and Ambystoma mexicanum (Amphibia: Ambystomatidae), fed the rotifer Plationus patulus, the ostracod Heterocypris incongruens, and the cladocerans Moina macrocopa and Daphnia pulex. Elaphoidella grandidieri is relatively easy to maintain under laboratory conditions, reaching densities (copepodites and adults) of more than 10,000 l(-1). The generation time ranged between 30-45 days, depending on the diet. The net reproductive rate was as high as 60 nauplii female(-1) day (1). Population growth rates ranged between 0.03 and 0.11 d(-1), live algae being the superior diet compared to detritus. Both predators showed no preference for E. grandidieri, but in the absence of alternate prey they consumed 80% of the harpacticoids offered. The data have been discussed in relation to the potential of E. grandidierias live food for aquaculture.     

The use of polymerase chain reaction for the identification of sciaenid eggs

Traditionally, sciaenid eggs have been identified based on morphological characteristics such as size, number of oil globules and/or pigmentation patterns. Identification of sciaenid eggs by these procedures is time consuming and often inaccurate due to considerable egg size overlap among species. The utilization of molecular techniques for the identification of economically important species has become a fundamental component in ecological studies involving fish eggs and larvae. This study reports the development of a series of both multiplex and individual polymerase chain reactions to identify the eggs of 11 sciaenid species commonly found in the Gulf of Mexico and estuaries near Port Aransas and Corpus Christi, TX, USA. Following method development, the discriminatory power of the assay was first determined with samples from adult fish collected from Aransas and Corpus Christi Bays, Galveston Bay and the lower Laguna Madre in northern Mexico. Most (97%) of these fishes were correctly identified to the level of species. To demonstrate the applicability of the assay, wild fish eggs were collected and analyzed from the Aransas Pass tidal inlet from September through December 2005. During this period, the eggs of four target species were positively identified which was in keeping with current knowledge regarding the spawning areas and seasons of these sciaenids based on the presence of mature females, eggs and/or larvae. Future use of this method can provide valuable information to better discriminate spawning sites and seasons of these species.     

Evaluation of pollution prevention options to reduce styrene emissions from fiber-reinforced plastic open molding processes

Pollution prevention (P2) options to reduce styrene emissions, such as new materials and application equipment, are commercially available to the operators of open molding processes. However, information is lacking on the emissions reduction that these options can achieve. To meet this need, the U.S. Environmental Protection Agency's (EPA) Air Pollution Prevention and Control Division, working in collaboration with Research Triangle Institute, measured styrene emissions for several of these P2 options. In addition, the emission factors calculated from these test results were compared with the existing EPA emission factors for gel coat sprayup and resin applications. Results show that styrene emissions can be reduced by up to 52% by using controlled spraying (i.e., reducing overspray), low-styrene and styrene-suppressed materials, and nonatomizing application equipment. Also, calculated emission factors were 1.6-2.5 times greater than the mid-range EPA emission factors for the corresponding gel coat and resin application. These results indicate that facilities using existing EPA emission factors to estimate emissions in open molding processes are likely to underestimate actual emissions. Facilities should investigate the applicability and feasibility of these P2 options to reduce their styrene emissions.