Sulfidation treatment of molten incineration fly ashes with Na2S for zinc, lead and copper resource recovery

The present study focuses on the conversion of heavy metals involved in molten incineration fly ashes to metal sulfides which could be thereafter separated by flotation. The sulfidation treatment was carried out for five molten incineration fly ashes (Fly ash-A to Fly ash-E) by contacting each fly ash with Na(2)S solution for a period of 10 min to 6h. The initial molar ratio of S(2-) to Me(2+) was adjusted to 1.20. The conversion of heavy metals to metal sulfides was evaluated by measuring the S(2-) residual concentrations using an ion selective electrode. The formation of metal sulfides was studied by XRD and SEM-EDS analyses. In the case of Fly ash-A to Fly ash-D, more than 79% of heavy metals of zinc, lead and copper was converted to metal sulfides within the contacting period of 0.5h owing to a fast conversion of metal chlorides to metal sulfides. By contrast, the conversion of about 35% was achieved for Fly ash-E within the same contacting period, which was attributed to a high content of metal oxides. Further, the S(2-) to Me(2+) molar ratio was reduced to 1.00 to minimize Na(2)S consumption and the conversions obtained within the contacting period of 0.5h varied from 76% for Fly ash-D to 91% for Fly ash-C. Finally, soluble salts such as NaCl and KCl were removed during the sulfidation treatment, which brought about a significant enrichment in metals content by a factor varying from 1.5 for Fly ash-D to 4.9 for Fly ash-A.     

Efficient preparation of greener N-doped carbon nanotube composites for water treatment by the microwave polyol method

N-doped carbon nanotubes have unique structures and strong interactions with metal nanoparticles due to the presence of nitrogen. There is actually a need for nanoparticles to treat water, without leaching of toxic metals. Here, we synthesized nanocomposites by deposition of Ag and Fe nanoparticles on N-doped carbon nanotubes with a surface area of 52 m²/g and 2 % N content to form nanocomposites. Transmission electron microscopy (TEM) of the nanocomposites revealed that the best dispersion of the deposited nanoparticles was achieved by the microwave-assisted polyol method. The Ag and Fe nanoparticles were indeed monodispersed and uniformly distributed on the surface of the N-doped carbon nanotubes. Deposition could be achieved in 5 min. The wet impregnation and deposition–precipitation methods gave composites with agglomerated nanoparticles. We observed that leaching of Fe and Ag into water was also influenced by the preparation method. No leaching of nanoparticles was observed when the composites were prepared by the microwave polyol method. This synthesis is therefore efficient with less energy and time. The strong metal/N-doped carbon nanotube interactions render these composites suitable for use in water purification.     

The hardrock minerals industry and the landscape architect

The landscape architecture profession is a source of creative thinking and planning which is relatively untapped within the mining industry in the United States of America. The landscape architect has been active in European operations for years as indicated by the four examples presented. The landscape architect can provide an important interface with mine design and engineering and environmental affairs. To initiate this interface within the United States, and increase its effectiveness, six objectives are presented and discussed.     

Competition of the active roots of Cassia siamea Lam. and Zea mays L.(cv.Katumani Composite B) in an alley cropping trial in semi arid Kenya

ＩｎｔｒｏｄｕｃｔｉｏｎＯｎｅｏｆｔｈｅｍａｊｏｒｄｒａｗｂａｃｋｓｏｆａｌｌｅｙｃｒｏｐｐｉｎｇｓｙｓｔｅｍｓｉｎｓｅｍｉａｒｉｄｌｏｗｆｅｒｔｉｌｉｔｙｃｏｎｄｉｔｉｏｎｓｉｓｃｏｍｐｅｔｉｔｉｏｎｆｏｒａｖａｉｌａｂｌｅｗａｔｅｒａｎｄｎｕｔｒｉｅｎｔｓ．Ｃｏｍｐｅｔｉｔｉｏｎｉｓｔｏｂｅｅｘｐｅｃｔｅｄｉｆｔｈｅｔｒｅｅａｎｄｔｈｅｃｒｏｐｈａｖｅｏｖｅｒｌａｐｐｉｎｇａｃｔｉｖｅｒｏｏｔｓｙｓｔｅｍｓｉｎｓｐａｃｅａｎｄｔｉｍｅ．Ａｋｎｏｗｌｅｄｇｅｏｆｔｈｅｓｐａｔｉａｌｄｉｓｔｒ…     

Enhancing environmental integration in strategic environmental assessment (SEA): insight from sensitivity analysis

This paper explores the potential of sensitivity analysis to improve the Strategic Environmental Assessment (SEA) process and enhance environmental integration. It applies the Sensitivity Model Prof. Vester® to the England SEA process, following two objectives: (1) establishing how different strategic environmental assessment (SEA) elements affect environmental integration; and (2) establishing the sensitivity of the SEA process in terms of response to change. The findings showed that no single element was critical to enhancing environmental integration. Several elements, acting as sources of uncertainty, leverage or stability in the process, were also identified, highlighting their potential as priority targets for process improvement. It is concluded that sensitivity analysis can supplement current expert-led approaches to SEA improvement by (1) identifying elements likely to influence environmental integration and (2) testing the likely performance of recommendations for process improvement.     

Chorionic villus sampling utilization following reports of a possible association with fetal limb defects

Prenatal diagnosis choices were reviewed in 473 women who presented for genetic counselling prior to 11 weeks' gestation for the indication of advanced maternal age. Group A consisted of 336 patients who were unaware of a possible association between chorionic villus sampling (CVS) and limb defects. Group B consisted of 137 patients who were provided this information. Fifty-one per cent of patients in group A and 45 per cent of patients in group B chose CVS. This difference was not significant by χ² analysis (P = 0·7). Patterns of prenatal diagnosis procedure utilization from 1987 to 1992 revealed a significant reduction in CVS utilization accompanied by a corresponding increase in amniocentesis after the association between CVS and limb defects was publicized. Referrals for CVS counselling also significantly declined. However, acceptance rates did not change for those patients who received genetic counselling. First-trimester genetic counselling, including a discussion regarding a possible association between CVS and limb defects, helps patients make informed decisions concerning prenatal diagnosis options, and, in our population, resulted in no change in CVS acceptance rates.     

Socio-economic impact management: programme design and implementation considerations

While larger mineral resource development projects offer new jobs and provide a stimulus to the economy of the area where they are sited, they may also pose problems in rural areas associated with rapid population growth. The purpose of an impact management programme is to anticipate and alleviate project effects that are generally perceived as undesirable and to enhance effects that are beneficial to site area communities. While the effective management of project effects is the end towards which all impact assessment efforts are directed, an integrated approach to impact management has been notably lacking. This paper suggests a systems framework for meeting this need by: (1) reviewing the need for impact management efforts; (2) discussing the objectives of, and considerations in, designing impact management programmes; (3) presenting a conceptual framework for, and key components of, such a programme; and (4) suggesting an approach for implementing such a system as an integral part of the project development process.     

White-tailed deer movement and distribution about surface coal mines in West Virginia,USA

Deer movements around surface coal mines were investigated in Preston Country, West Virginia, USA. Seventy-two deer crossings were counted on 29 surface mines with only 8% found on highwalls with more than 20% rock or stone. Thus, although slope was important, the percentage of dirt on the highwall determined use as a crossing location for deer. The average distance between all deer crossing was 209.7 m but the distance between the end of the highwall and the nearest highwall crossing was 248.7 m indicating reluctance of deer to cross mines when they could walk around them. Winter snow track counts showed fewer deer within 90 m of the top edge of the highwall. Four land bridges traversed the highwall and were heavily utilized by deer, especially in March, April, May, October and November. The surface mine bench was used as a fawn bedding area, but little feeding occurred on this portion of the mine.     

Shared values for the marine environment – developing a culture of practice for marine spatial planning

Though still relatively new, the development of marine spatial planning has been based on the on the premise that as a rational planning process, it can be applied following universal principles and steps informed by land-based inspired theoretical underpinnings. However, within this process, differences between marine and terrestrial environments are being overlooked, potentially affecting the way in which the marine environment is understood and valued, and the development of a culture of practice for, and specific to, marine spatial planning. By framing planning as a cultural construct, this paper aims to explore the extent to which land-based rationales are affecting the development of a marine spatial planning culture of practice, with its own ethos and shared values. A culturalised planning model adapted from [Knieling, J. and Othengrafen, F. (2015). Planning culture—a concept to explain the evolution of planning policies and processes in Europe? European Planning Studies, 23(11), 2133–2147] is used as a framework. Whilst acknowledging the importance of the contributions from land-based planning and the ecological sciences, the findings suggest that those unconscious beliefs and perceptions affecting society’s understanding of the marine environment should contribute to informing shared values for marine spatial planning practice.