Plume rise in a shear layer with neutral stability

Several solutions have been published to predict the rise of buoyant plumes in a shear layer with a power-law velocity profile. Each of these solutions is either a special case or is based on oversimplifying assumptions. In this paper, solutions to the plume-rise equations are given for buoyant and nonbuoyant plumes with initial vertical momentum. Solutions are given for both point sources and sources with a finite initial size under neutral stability. For a constant wind speed, these solutions simplify to the conventional plume-rise equations.     

A sorptive slurry bioscrubber for the control of acetone

A sorptive slurry bioscrubber adds powdered activated carbon (PAC) to a conventional suspended-growth bioscrubber. The activated carbon increases pollutant removal from the gas phase due to adsorption on carbon. The carbon is bioregenerated in the oxidation reactor and recycled to the scrubbing column. A three-stage, conventional bioscrubber was tested with and without carbon. The experiments showed that the PAC improved the removal efficiency of the system and that bioregeneration occurred. At an inlet gas-phase acetone concentration of 50 ppmv, the steady-state removal increased from 88 to 95% when activated carbon was added to the biological slurry.     

Gaseous and particulate emissions from a DC arc melter

Tests treating soils contaminated with metal compounds and radionuclide surrogates were conducted in a DC arc melter. The soil melted, and glassy or ceramic waste forms with a separate metal phase were produced. Tests were run in the melter plenum with either air or N2 purge gases. In addition to nitrogen, the primary emissions of gases were CO2, CO, oxygen, methane, and oxides of nitrogen (NO(x)). Although the gas flow through the melter was low, the particulate concentrations ranged from 32 to 145 g/m3. Cerium, a nonradioactive surrogate for plutonium and uranium, was not enriched in the particulate matter (PM). The PM was enriched in cesium and highly enriched in lead.     

Optical characteristics of southeast Asia's regional aerosols and their sources

The dominant optical characteristics of Southeast Asia (SEA)'s regional aerosols were determined from the cluster analysis of the 26 AERONET aerosol inversion products, including aerosol light scattering/absorption indicators and aerosol size/shape parameters retrieved from 2003 to 2007. The data sets were acquired from four stations: Bac Giang in Vietnam and Mukdahan, Pimai, and Silpakorn University in Thailand. The cluster analysis showed agreement among the aerosol optical characteristics, land cover/uses, season as the surrogate of the prevailing winds, and observations from the literature. The results of this study showed that during the northeast prevailing winds from mid-September to December, the high aerosol exposure events were most frequently observed over the upwind station and less often over the downwind stations. This aerosol exhibited a single scattering albedo (SSA) of approximately 0.95 (440 nm), a relatively low refractive index, and a larger fine-mode size, suggesting it had the characteristics of urban/industrial aerosols reported in the literature. These aerosol sources were upwind from Bac Giang, probably in eastern China. From January to April, the aerosol exhibited a lower SSA of approximately 0.90, a higher refractive index, and a smaller fine-mode size, suggesting biomass burning smoke reported in the literature. The SEA urban aerosol exhibited a mean SSA of approximately 0.90 (440 nm) or lower, and the coarse-mode aerosol, possibly road dust or soil dust, played a role from October to January when seasonal winds are strongest. The results from a canonical discriminant function analysis suggest that the dominant SEA aerosol clusters tended to be separated by a canonical function positively correlated with SSA, the fine-mode asymmetry factor, and the overall fine-mode size and negatively correlated with the refractive index.     

Environmental issues and management strategies for waste electronic and electrical equipment

Issues surrounding the impact and management of discarded or waste electronic and electrical equipment (WEEE) have received increasing attention in recent years. This attention stems from the growing quantity and diversity of electronic and electrical equipment (EEE) used by modern society, the increasingly rapid turnover of EEE with the accompanying burden on the waste stream, and the occurrence of toxic chemicals in many EEE components that can pose a risk to human and environmental health if improperly managed. In addition, public awareness of the WEEE or "e-waste" dilemma has grown in light of popular press features on events such as the transition to digital television and the exportation of WEEE from the United States and other developed countries to Africa, China, and India, where WEEE has often not been managed in a safe manner (e.g., processed with proper safety precautions, disposed of in a sanitary landfill, combusted with proper air quality procedures). This paper critically reviews current published information on the subject of WEEE. The definition, magnitude, and characteristics of this waste stream are summarized, including a detailed review of the chemicals of concern associated with different components and how this has changed and continues to evolve over time. Current and evolving management practices are described (e.g., reuse, recycling, incineration, landfilling). This review discusses the role of regulation and policies developed by governments, institutions, and product manufacturers and how these initiatives are shaping current and future management practices.     

A Sorptive Slurry Bioscrubber for the Control of Acetone

ABSTRACT

A sorptive slurry bioscrubber adds powdered activated carbon (PAC) to a conventional suspended-growth bioscrubber. The activated carbon increases pollutant removal from the gas phase due to adsorption on carbon. The carbon is bioregenerated in the oxidation reactor and recycled to the scrubbing column. A three-stage, conventional bioscrubber was tested with and without carbon. The experiments showed that the PAC improved the removal efficiency of the system and that bioregeneration occurred. At an inlet gas-phase acetone concentration of 50 ppmv, the steady-state removal increased from 88 to 95% when activated carbon was added to the biological slurry.     

Estimation of Southeast Asian rice paddy areas with different ecosystems from moderate-resolution satellite imagery

Multi-temporal satellite imagery from the Moderate Resolution Imaging Spectrometer (MODIS) was used to map the different ecosystems of Southeast Asian (SEA) rice paddies. The algorithm was based on temporal profiles of vegetation strength and/or water content, using MODIS surface reflectance in visible to near-IR range. The results obtained from the analysis were compared to national statistics. Estimated SEA regional rice area was 42 × 10⁶ ha, which agrees with published values. The model performance was dependent on rice ecosystems. Good linear relationships between the model results and the national statistics were observed for rainfed rice. High linear coefficients of determination, R², were also found for irrigated rice and upland rice, but the model tended to underestimate irrigated rice and overestimate upland rice. However, these high R² values indicated that the model effectively simulated spatial distribution of these rice areas. These R² values were either of similar magnitude or larger than those reported in literature, regardless of the rice ecosystem. Poor correlation was observed for deepwater rice.     

An Integrated Theory for Suspended-Growth Bioscrubbers

An integrated theory is developed to describe the steadystate operation of a suspended-growth bioscrubber for the control of biodegradable, volatile organic gases. The bioscrubber consists of an N-stage absorber and an oxidation reactor. A biomass slurry is circulated between the absorber and the oxidation reactor, t he pollutant is absorbed and partially oxidized in the absorber. Oxidation is completed in the oxidation reactor. Predictions of the theory show that the removal efficiency is a function of Henry's Law constant for the pollutant, the ratio of the liquid flow rate to the gas flow rate, and the number of stages. Since high efficiencies can be achieved for soluble, biodegradable, volatile organic compounds, such systems have the potential to be a low-cost control method.