Effects of Habitat Fragmentation on Bird Species in a Relict Temperate Forest in Semiarid Chile

Abstract: We analyzed the structure and composition of a bird assemblage in a fragmented relict temperate forest located in northcentral Chile ( Fray Jorge National Park). In terms of species composition, the bird assemblage we found in Fray Jorge was more similar to southern temperate forest sites, located more than 1200 km south of Fray Jorge, than to localities found in nearby scrub habitats. The relict character and long-term isolation of the Fray Jorge forest provides a natural experiment with which to establish the potential long-term effects of fragmentation and isolation on southern Chilean temperate forests. Between May 1996 and March 1997, we conducted seasonal surveys of birds in six forest fragments, ranging in size from 0.5 to 22.5 ha, at Fray Jorge. The number of bird species at each forest fragment was positively correlated with fragment area during all seasons. The relict forest system had a steeper species-area slope than that reported for similar temperate-forest bird assemblages in forest fragments within Chiloé Island and for islands across the Chiloé Archipelago in southern Chile. In this regard, this bird fauna resembled a depauperate oceanic archipelago. This difference in area effects is likely a consequence of the minimization of rescue effects because of the absence of large source forest areas nearby and the long-term isolation of the system. In addition, the distribution of species among forest fragments in Fray Jorge was not random, showing a nested subset pattern. Thus, some species occur across all fragments, regardless of their area, and therefore are less affected by habitat fragmentation and less prone to local extinction. These results suggest that, for south-temperate forest birds, large fragments (or reserves) should afford better protection against extinction than small forest patches.     

Climate engineering and human rights

ABSTRACT

In this Forum, three scholars discuss how climate engineering will pose novel human rights challenges, and may well force reconsideration of how human rights are applied as a guide to action. Following a short introduction, the first section introduces three competing approaches to human rights, arguing views which emphasize fairness or attempt to maximize satisfaction are more promising than one viewing human rights as inviolable ‘side-constraints’. The second section draws lessons from climate migration that are relevant for climate engineering in terms of incorporating a human rights approach to duties, rights, and participation. The final section compares the ‘needs-based’ and ‘rights-based’ approaches to humanitarian work in the face of climate change and climate engineering, raising concerns for duty-bearers and right-holders. The Forum’s conclusion draws together points of overlap and suggests a path forward for policy and research on this topic.     

Finding threatened forest areas in the central volcanic mountain range conservation area in Costa Rica

The degree at which tropical forests are exposed to human pressure is spatially dependent. Population density, proximity to roads, terrain slope, logging activities and land distribution projects are well known factors inducing deforestation and forest degradation in Latin America. Using expert knowledge to weight these threat factors and a Geographical Information System for spatial modeling, a multi-criteria analysis procedure is presented, that allows stratifying a study region in categories of deforestation threat. The procedure was implemented in the Central Volcanic Mountain Range Conservation Area (CVMRCA) in Costa Rica with the purpose of finding areas with a combination of physical and socioeconomic characteristics that is particularly predisposing to a high probability of deforestation. To validate the map, the CVMRCA was stratified in categories of deforestation risk, and the result was superposed to historical deforestation data of the period 1986–1996. The good correlation between risk category and historical deforestation (r = 0.91, p < 0.001) indicates that the map can be used as a decision support tool for defining priority areas for conservation action.     

Investigations on mechanical biological treatment of waste in South America: towards more sustainable MSW management strategies

This work presents an analysis on the suitability of mechanical biological treatment of municipal solid waste in South America, based on two previous experimental investigations carried out in two different countries. The first experiment was performed for determining the mass and volume reduction of MSW in the province of Concepción (Chile). The implemented bench-scale process consisted of a manual classification and separation stage, followed by an in-vessel biological degradation process. The second experiment consisted of a full-scale experiment performed in the city of Estrela (Brazil), where the existing municipal waste management facility was adapted to enhance the materials sorting and separation. Expressed in wet weight composition, 85.5% of the material input in the first experiment was separated for biological degradation. After 27 days of processing, 60% of the initial mass was reduced through degradation and water evaporation. The final fraction destined for landfilling equals 59% of the total input mass, corresponding to about 50% of the initial volume. In the second experiment, the fraction destined to landfill reaches 46.6% of the total input waste mass, whilst also significantly reducing the total volume to be disposed. These results, and the possible recovery of material streams suitable for recycling or for preparing solid recovered fuels, are the main advantages of the studied process.     

Transfer of Graphene CVD to Surface of Low Density Polyethylene (LDPE) and Poly(butylene adipate-co-terephthalate) (PBAT) Films: Effect on Biodegradation Process

Here, the influence of graphene as a coating on the biodegradation process for two different polymers is investigated, poly(butylene adipate-co-terephthalate) (PBAT) (biodegradable) and low-density polyethylene (LDPE) (non-biodegradable). Chemical vapor deposition graphene was transferred to the surface of two types of polymers using the Direct Dry Transfer technique. Polymer films, coated and uncoated with graphene, were buried in a maturated soil for up to 180 days. The films were analyzed before and after exposure to microorganisms in order to obtain information about the integrity of the graphene (Raman Spectroscopy), the biodegradation mechanism of the polymer (molecular weight and loss of weight), and surface changes of the films (atomic force microscopy and contact angle). The results prove that the graphene coating acted as a material to control the biodegradation process the PBAT underwent, while the LDPE covered by graphene only had changes in the surface properties of the film due to the accumulation of solid particles. Polymer films coated with graphene may allow the production of a material that can control the microbiological degradation, opening new possibilities in biodegradable polymer packaging. Regarding the possibility of graphene functionalization, the coating can also be selective for specific microorganisms attached to the surface.     

High efficiencies in the electrochemical oxidation of an anthraquinonic dye with conductive-diamond anodes

Oxidation of anthraquinonic dye Acid Blue 62 by electrolysis with conductive-diamond electrodes is studied in this work. COD, TOC, and color have been selected to monitor the degradation of the molecule as a function of several operating inputs (current density, pH, temperature, and NaCl concentration). Results show that the electrochemical oxidation of this model of large molecules follows a first order kinetics in all the conditions assessed, and it does not depend on the pH and temperature. The occurrence of chloride ions in wastewaters increases the rate of color and COD removal as a consequence of the mediated oxidation promoted by the chlorinated oxidizing species. However, chloride occurrence does not have an influence on the mineralization rate. First-order kinetic-constants for color depletion (attack to chromophores groups), oxidation (COD removal), and mineralization (TOC removal) were found to depend on the current density and to increase significantly with its value. A single model was proposed to explain these changes in terms of the mediated oxidation processes. Rate of mineralization remained very close to that expected for a purely mass transfer-controlled process. This was explained assuming that mediated oxidation does not have a significant influence on the mineralization in spite it has some effect on intermediate oxidation stages. The efficiency of the oxidation was found to depend mainly on the concentration of COD being negligible the effect of the other inputs assessed except for the occurrence of chloride ions. Opposite, the efficiency of mineralization depends on concentration of TOC and current density and it did not depend on the chloride occurrence. This observation was found to have an important influence on the power required to remove a given percentage of the initial TOC or COD. To decrease COD efficiently, the occurrence of chloride in the solution is very important, while to remove TOC efficiently, it is more important to work at low current densities and chloride effect is negligible. Energy consumption could be decreased by folds using the proper conditions.     

Identification of microcystins from three collection strains of Microcystis aeruginosa

Microcystins (MCs) are toxic cyclic heptapeptides produced by various cyanobacteria genera, especially Microcystis. We identified 10 out of 12 MCs produced by three Microcystis aeruginosa strains from cyanobacteria collections, UTEX 2666, UTEX 2670 and UAM 1303, by using two analytical methods: Matrix-assisted Laser Desorption Ionization Time of Flight Mass Spectrometry (MALDI-TOF/MS) and HPLC Photodiode Array Detector coupled to a hybrid Quadrupole Time of Flight Mass Spectrometry (HPLC-PDA-QTOF/MS). MALDI-TOF/MS failed to detect non-polar MCs, such as MC-LY and MC-LW. HPLC-QTOF/MS permitted the accurate identification of most MCs present in methanolic extracts. Besides, three new MCs, namely: [D-Glu(OCH₃)⁶, D-Asp³] MC-LAba, MC-YL and MC-YM were detected by HPLC-QTOF/MS.     

Photocatalytic degradation of contaminants of concern with composite NF-TiO2 films under visible and solar light

This study reports the synthesis and characterization of composite nitrogen and fluorine co-doped titanium dioxide (NF-TiO₂) for the removal of contaminants of concern in wastewater under visible and solar light. Monodisperse anatase TiO₂ nanoparticles of different sizes and Evonik P25 were assembled to immobilized NF-TiO₂ by direct incorporation into the sol–gel or by the layer-by-layer technique. The composite films were characterized with X-ray diffraction, high-resolution transmission electron microscopy, environmental scanning electron microscopy, and porosimetry analysis. The photocatalytic degradation of atrazine, carbamazepine, and caffeine was evaluated in a synthetic water solution and in an effluent from a hybrid biological concentrator reactor (BCR). Minor aggregation and improved distribution of monodisperse titania particles was obtained with NF-TiO₂-monodisperse (10 and 50 nm) from the layer-by-layer technique than with NF-TiO₂?+?monodisperse TiO₂ (300 nm) directly incorporated into the sol. The photocatalysts synthesized with the layer-by-layer method achieved significantly higher degradation rates in contrast with NF-TiO₂-monodisperse titania (300 nm) and slightly faster values when compared with NF-TiO₂-P25. Using NF-TiO₂ layer-by-layer with monodisperse TiO₂ (50 nm) under solar light irradiation, the respective degradation rates in synthetic water and BCR effluent were 14.6 and 9.5?×?10^?3?min^?1 for caffeine, 12.5 and 9.0?×?10^?3?min^?1 for carbamazepine, and 10.9 and 5.8?×?10^?3?min^?1 for atrazine. These results suggest that the layer-by-layer technique is a promising method for the synthesis of composite TiO₂-based films compared to the direct addition of nanoparticles into the sol.     

Adverse birth outcomes in the vicinity of industrial installations in Spain 2004–2008

Industrial activity is one of the main sources of ambient pollution in developed countries. However, research analyzing its effect on birth outcomes is inconclusive. We analyzed the association between proximity of mother’s municipality of residence to industries from 24 different activity groups and risk of very (VPTB) and moderate (MPTB) preterm birth, very (VLBW) and moderate (MLBW) low birth weight, and small for gestational age (SGA) in Spain, 2004–2008. An ecological study was defined, and a “near vs. far” analysis (3.5 km threshold) was carried out using Hierarchical Bayesian models implemented via Integrated Nested Laplace Approximation. VPTB risk was higher for mothers living near pharmaceutical companies. Proximity to galvanization and hazardous waste management industries increased the risk of MPTB. Risk of VLBW was higher for mothers residing near pharmaceutical and non-hazardous or animal waste management industries. For MLBW many associations were found, being notable the proximity to mining, biocides and animal waste management plants. The strongest association for SGA was found with proximity to management animal waste plants. These results highlight the importance of further research on the relationship between proximity to industrial sites and the occurrence of adverse birth outcomes especially for the case of pharmaceutical and animal waste management activities.