Validation of the Digital Opacity Compliance System under Regulatory Enforcement Conditions

Abstract

U.S. Environmental Protection Agency (EPA) Emission Measurement Center in conjunction with EPA Regions VI and VIII, the state of Utah, and the U.S. Department of Defense have conducted a series of long-term pilot and field tests to determine the accuracy and reliability of a visible opacity monitoring system consisting of a conventional digital camera and a separate computer software application for plume opacity determination. This technology, known as the Digital Opacity Compliance System (DOCS), has been successfully demonstrated at EPA-sponsored Method-9 “smoke schools,” as well as at a number of government and commercially operated industrial facilities.

Results from the current DOCS regulatory pilot study demonstrated that, under regulatory enforcement conditions, the average difference in opacity measurement between the DOCS technology and EPA Reference Method 9 (Method 9) was 1.12%. This opacity difference, which was computed from the evaluation of 241 regulated air sources, was found to be statistically significant at the 99% confidence level. In evaluating only those sources for which a nonzero visible opacity level was recorded, the average difference in opacity measurement between the DOCS technology and Method 9 was 1.20%. These results suggest that the two opacity measurement methods are essentially equivalent when measuring the opacity of visible emissions.

Given the costs and technical limitations associated with use of Method 9, there is a recognized need to develop accurate, reproducible, and scientifically defensible alternatives to the use of human observers. The use of digital imaging/processing brings current technology to bear on this important regulatory issue. Digital technology offers increased accuracy, a permanent record of measurement events, lower costs, and a scientifically defensible approach for opacity determination.     

Investigating soils retention ratios and modelling geochemical factors affecting heavy metals retention in soils in a tropical urban watershed

This study aimed at investigating the retention of Pb and Cd in soils and the geochemical factors influencing the adsorption of these pollutants. Soil samples were air-dried and ground to pass through a 2-mm sieve, and different soil extracts were prepared for chemical analysis (organic matter, cation exchange capacity and pH). Total Pb and Cd were extracted with diacid using digestion method and determined by atomic adsorption spectrophotometer (AAS) after filtration. Results revealed that the heavy metals retention ratio (RR) of the Rhodic ferralsol, Xanthic ferralsol and Mollic gleysol (2) were very high for Cd (>80 %) and was relatively low (generally < 60 %) for Pb. In contrast, RRs for the Plinthic gleysol and the Mollic gleysol (1) were relatively low (<60 %), regardless of the heavy metal concerned. Multiple regression equations indicated for Pb and Cd concentrations different linear relationships over simple linear regression, when pH, organic matter, clay percentage and cation exchange capacity (CEC) were used as independent variables. Results indicate that organic matter exerts major influences on the retention of Pb and Cd in soils, while CEC, clay content and pH have a minor influence in this process in the Ntem watershed. From these observations, the application of soil organic matter could be a solution in protecting shallow aquifers from heavy metal pollution and thus insuring that they are not a hazard to public health.     

Chloroplastic responses of ponderosa pine (Pinus ponderosa) seedlings to ozone exposure

Integrity of chloroplast membranes is essential to photosynthesis. Loss of thylakoid membrane integrity has been proposed as a consequence of ozone (O(3)) exposure and therefore may be a mechanistic basis for decreased photosynthetic rates commonly associated with ozone exposure. To investigate this hypothesis, Pinus ponderosa seedlings were exposed to ambient air or ozone concentrations maintained at 0.15 or 0.30 microliter l(-1) for 10 h day(-1) for 51 days during their second growing season. Over the course of the study, foliage samples were periodically collected for thylakoid membrane, chlorophyll and protein analyses. Additionally, gas-exchange measurements were made in conjunction with foliage sampling to verify that observed chloroplastic responses were associated with ozone-induced changes in photosynthesis.Needles exposed to elevated ozone exhibited decreases in chlorophyll a and b content. The decreases were dependent on the duration and intensity of ozone exposure. When based on equal amounts of chlorophyll, ozone-exposed sample tissue exhibited an increase in total protein. When based on equal amounts of protein, ozone-exposed samples exhibited an increase in 37 kDa proteins, possibly consisting of breakdown products, and a possible decrease in 68 kDa proteins, Rubisco small subunit. There was also a change in the ratio of Photosystem I protein complexes CPI and CPII that may have contributed to decreased photosynthesis. Net photosynthetic rates were decreased in the high ozone treatment suggesting that observed structural and biochemical changes in the chloroplast were associated with alterations of the photosynthetic process.     

中国食管癌发病区环境地球化学及相关模型的研究进展

食管癌是一种常见的消化道疾病,在世界许多国家和地区均有发生,其中环境因素是引发地方病食管癌的重要因素。目前,模型被应用于食管癌的研究中,食管癌研究模型主要有食管癌发病率预测模型,食管癌预防模型及食管癌动物模型等。本文主要综述了前人对中国食管癌发病区的土壤、饮用水和食物等环境地球化学因素,以及与食管癌研究相关的土壤模型和食管癌模型的研究进展。     

Occurrence of PCBs in raw and finished drinking water at seven public water systems along the Hudson River

Polychlorinated biphenyls (PCBs) were measured in raw and finished drinking water at seven Public Water Systems (PWSs) along the Hudson River as part of a baseline monitoring program prior to the extensive sediment dredging of the Upper Hudson River. Water samples were either analyzed using an Aroclor method (based on USEPA Method 508) or a congener method (Modified Green Bay Mass Balance Method). Using the congener-based method, raw water concentrations ranged from <9.3 to 164.3 ng/L and finished water concentrations ranged from <9.3 to 186.6 ng/L. Using the Aroclor method, finished water concentrations ranged from <5.0 to 200.9 ng/L. Most finished water samples above 73.0 ng/L were from a PWS with wells drilled near the river. Excluding the well data, total PCB concentrations in raw water at systems in the Upper River were similar to concentrations at systems in the Lower River, though the congener patterns differed. Paired comparison of total PCB concentrations using the two analytical methods showed good agreement, although raw water showed a different relationship than finished water.     

Correlation analysis as a tool to investigate the bioaccessibility of nickel, vanadium and zinc in Northern Ireland soils

Correlation analyses were conducted on nickel (Ni), vanadium (V) and zinc (Zn) oral bioaccessible fractions (BAFs) and selected geochemistry parameters to identify specific controls exerted over trace element bioaccessibility. BAFs were determined by previous research using the unified BARGE method. Total trace element concentrations and soil geochemical parameters were analysed as part of the Geological Survey of Northern Ireland Tellus Project. Correlation analysis included Ni, V and Zn BAFs against their total concentrations, pH, estimated soil organic carbon (SOC) and a further eight element oxides. BAF data were divided into three separate generic bedrock classifications of basalt, lithic arenite and mudstone prior to analysis, resulting in an increase in average correlation coefficients between BAFs and geochemical parameters. Sulphur trioxide and SOC, spatially correlated with upland peat soils, exhibited significant positive correlations with all BAFs in gastric and gastro-intestinal digestion phases, with such effects being strongest in the lithic arenite bedrock group. Significant negative relationships with bioaccessible Ni, V and Zn and their associated total concentrations were observed for the basalt group. Major element oxides were associated with reduced oral trace element bioaccessibility, with Al₂O₃ resulting in the highest number of significant negative correlations followed by Fe₂O₃. spatial mapping showed that metal oxides were present at reduced levels in peat soils. The findings illustrate how specific geology and soil geochemistry exert controls over trace element bioaccessibility, with soil chemical factors having a stronger influence on BAF results than relative geogenic abundance. In general, higher Ni, V and Zn bioaccessibility is expected in peat soil types.     

Impacts of freshwater wetlands on water quality: A landscape perspective

In this article, we suggest that a landscape approach might be useful in evaluating the effects of cumulative impacts on freshwater wetlands. The reason for using this approach is that most watersheds contain more than one wetland, and effects on water quality depend on the types of wetlands and their position in the landscape. Riparian areas that border uplands appear to be important sites for nitrogen processing and retention of large sediment particles. Fine particles associated with high concentrations of phosphorus are retained in downstream wetlands, where flow rates are slowed and where the surface water passes through plant litter. Riverine systems also may play an important role in processing nutrients, primarily during flooding events. Lacustrine wetlands appear to have the least impact on water quality, due to the small ratio of vegetated surface to open water. Examples are given of changes that occurred when the hydrology of a Maryland floodplain was altered.     

Life cycle cost evaluation of the digital opacity compliance system

The US Environmental Protection Agency (EPA) has established EPA Reference Method 9 (Method 9) as the preferred enforcement approach for verifying compliance with federal visible opacity standards. While Method 9 has an extensive history of successful employment, reliance on human observers to quantify visible emissions is inherently subjective, a characteristic that exposes Method 9 results to claims of inaccuracy, bias and, in some cases, outright fraud.The Digital Opacity Compliance System (DOCS), which employs commercial-off-the-shelf digital photography coupled with simple computer processing, is a new approach for quantifying visible opacity. The DOCS technology has been previously demonstrated to meet and, in many cases, surpass the Method 9 accuracy and reliability standards (McFarland et al., 2006). Beyond its performance relative to Method 9, DOCS provides a permanent visual record of opacity, a vital feature in legal compliance challenges.In recent DOCS field testing, the opacity analysis of two hundred and forty one (241) regulated air emissions from the following industrial processes: 1) industrial scrubbers, 2) emergency generators, 3) asphalt paving, 4) steel production and 5) incineration indicated that Method 9 and DOCS were statistically equivalent at the 99% confidence level. However, a life cycle cost analysis demonstrated that implementation of DOCS could potentially save a facility $15,732 per trained opacity observer compared to utilization of Method 9.