Concentration of heavy metals in various children's herbal tea types and their correlations

This investigation was undertaken to determine the concentrations of cadmium, lead, mercury, zinc, copper and magnesium in six tea types used as children's tea. Six types of tea of different herbal composition used for children's consumption (T1, T2, T3, T4, T5 and T6) were analyzed in three subsequent collections. The analysis of cadmium showed that the concentration was very similar in all types of children's tea, ranging from 0.233 to 0.369 mg/kg. Lead concentrations were in the range of 0.340-1.564 mg/kg without any significant differences. The analysis of mercury detected very low concentration of this metal in all samples (0.002-0.004 mg/kg). In zinc, the values ranged from 36.633 to 71.711 mg/kg, with significant differences (p < 0.001) according to tea type. Copper concentration was 10.089-30.178 mg/kg with the highest value in T4. The concentration of magnesium was significantly higher in tea T1 and T2 (102.311 and 129.422 mg/kg) in comparison with other tea types where the level was 19.811-37.411 mg/kg. The maximum tolerable limit determined by Codex Alimentarius was not exceeded in any sample. In general, correlation analysis detected high positive correlation between cadmium and lead (r = 0.89), cadmium and mercury (r = 0.92) and between lead and mercury (r = 0.77).     

Utilization of Waste Lignin and Hydrolysate From Chromium Tanned Waste in Blends of Hot-Melt Extruded PVA-Starch

The demand for biodegradable plastic material is increasing worldwide. However, the cost remains high in comparison with common forms of plastic. Requirements comprise low cost, good UV-stability and mechanical properties, as well as solubility and water uptake lead to the preparation of multi-component polymer blends based on polyvinyl alcohol and starch in combination with waste products that are hard to utilize—waste lignin and hydrolysate extracted from chromium tanned waste. Surprisingly the addition of such waste products into PVA gives rise to blends with better biodegradability than commercial PVA in an aquatic aerobic environment with non-adapted activated sludge. These blends also exhibited greater solubility in the water and UV stability than commercial PVA. Tests on the processing properties of the blends (melt flow index, tensile strength and elongation at break of the films) as well as their mechanical properties showed that materials based on these blends might be applied in agriculture (for example as the systems for controlled-release pesticide or fertilizer) and, somewhat, in the packaging sector.     

Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.     

Mercury in fish tissues in the area of Malachov Hg-ore deposit (Slovakia)

Environmental Geochemistry and Health - The abandoned Malachov deposit belongs among the most important historic Hg deposits in the world. The soil, groundwater, surface water, plants, and animals...     

Influence of H2SO4 and ferric iron on Cd bioleaching from spent Ni–Cd batteries

The paper is concerned with biohydrometallurgical methods of cadmium recovery from spent Ni–Cd batteries. Cd leaching efficiency from electrode material in different media (H₂SO₄ and Fe₂(SO₄)₃ solutions), at different Fe(III) concentrations and using the bacteria Acidithiobacillus ferrooxidans were investigated. The main aim of this study was to understand which from the bioleaching products (sulphuric acid or ferric sulphate) play a main role in the bioleaching process of Cd recovery. The influence of Fe ions on Cd leachability was confirmed. The best leaching efficiency of Cd (100%) was reached by bioleaching and also by leaching in Fe₂(SO₄)₃ solution. The results of X-ray diffraction confirmed that no cadmium was present in solid residuum obtained after the Cd bioleaching as well as Cd leaching using solely ferric iron. The use of H₂SO₄ solution resulted in the lowest efficiency of Cd leachability, the presence of hydroxides in electrode materials caused neutralization of the leaching solution and inhibition of Cd leaching.     

Breeding success of a brood parasite is associated with social mating status of its host

Reproductive success of brood parasites varies considerably both among and within host species, mainly due to differences in host egg-rejection rates and survival of parasitic chicks. Here, we investigated the breeding success of the cuckoo (Cuculus canorus) in one of its major hosts, the great reed warbler (Acrocephalus arundinaceus), with respect to host social mating status. In this passerine, polygynous males provide less parental care to their young per nest than monogamous males. Consequently, their less-assisted females may fledge lower numbers of nestlings than monogamous females. This may be especially true for secondary females, which often receive limited or no paternal help with young at all. Based on these findings, we expected higher cuckoo reproductive success in nests of socially monogamous than polygynous great reed warbler males. More specifically, we predicted lower fledging success of cuckoo young in nests of secondary than primary or monogamous females. In line with the prediction, we found higher cuckoo fledging success in nests of monogamous than polygynous males, monogamous nests being more than twice as successful as secondary nests. We detected, however, only a tendency to lower cuckoo success in primary compared to monogamous nests and no differences between primary and secondary nests. Moreover, neither parasitism nor host egg-rejection rates differed among the nests of different status. Our results show, for the first time, that the social mating status of a host may influence the overall reproductive success of a brood parasite and thus should be considered in further studies.     

Concentration of heavy metals in various children's herbal tea types and their correlations

This investigation was undertaken to determine the concentrations of cadmium, lead, mercury, zinc, copper and magnesium in six tea types used as children's tea. Six types of tea of different herbal composition used for children's consumption (T1, T2, T3, T4, T5 and T6) were analyzed in three subsequent collections. The analysis of cadmium showed that the concentration was very similar in all types of children's tea, ranging from 0.233 to 0.369 mg/kg. Lead concentrations were in the range of 0.340–1.564 mg/kg without any significant differences. The analysis of mercury detected very low concentration of this metal in all samples (0.002–0.004 mg/kg). In zinc, the values ranged from 36.633 to 71.711 mg/kg, with significant differences (p < 0.001) according to tea type. Copper concentration was 10.089–30.178 mg/kg with the highest value in T4. The concentration of magnesium was significantly higher in tea T1 and T2 (102.311 and 129.422 mg/kg) in comparison with other tea types where the level was 19.811–37.411 mg/kg. The maximum tolerable limit determined by Codex Alimentarius was not exceeded in any sample. In general, correlation analysis detected high positive correlation between cadmium and lead (r = 0.89), cadmium and mercury (r = 0.92) and between lead and mercury (r = 0.77).     

Biodegradability and Mechanical Properties of Poly(vinyl alcohol)-Based Blend Plastics Prepared Through Extrusion Method

Plastic blend materials consisting of poly(vinyl alcohol), glycerol and xanthan or gellan were prepared through laboratory extrusion. Their base mechanical properties were compared with the properties of poly(vinyl alcohol) foil and their biodegradability in soil, compost and both activated and anaerobic sludge were assessed. In samples with lower polysaccharide content (10–21 %w/w) the tensile strength of 15–20 MPa was found; the elongation at break of all blends was relatively close to the parameter of poly(vinyl alcohol) foil. The biodegradability levels of the blends tested corresponded to the content of natural components, and the mineralization of the samples with the highest carbohydrate proportion (42 %) reached 50–78 %, depending on the type of the environment. Complete biodegradation of all samples occurred in activated sludge.