Case study of landfill reclamation at a Florida landfill site

A landfill reclamation project was considered to recover landfill airspace and soil, reduce future groundwater impacts by removing the waste buried in the unlined area, and optimize airspace use at the site. A phased approach was utilized to evaluate the technical and economic feasibility of the reclamation project; based on the results of these evaluations, approximately 6.8 ha of the unlined cells were reclaimed. Approximately 371,000 in-place cubic meters of waste was mined from 6.8 ha in this project. Approximately 230,600 cubic meters of net airspace was recovered due to beneficial use of the recovered final cover soil and reclaimed soil as intermediate and daily cover soil, respectively, for the current landfill operations. This paper presents the researchers’ landfill reclamation project experience, including a summary of activities pertaining to reclamation operations, an estimation of reclamation rates achieved during the project, project costs and benefits, and estimated composition of the reclaimed materials.     

Bioremediation of industrial waste through mushroom cultivation

Handmade paper and cardboard industries are involved in processing of cellulosic and ligno-cellulosic substances for making paper by hand or simple machinery. In the present study solid sludge and effluent of both cardboard and handmade paper industries was collected for developing a mushroom cultivation technique to achieve zero waste discharges. Findings of present research work reveals that when 50% paper industries waste is used by mixing with 50% (w/w) wheat straw, significant increase (96.38%) in biological efficiency over control of wheat straw was observed. Further, cultivated basidiocarps showed normal morphology of stipe and pileus. Cross section of lamellae did not show any abnormality in the attachment of basidiospores, hymenal trama and basidium. No toxicity was found when fruiting bodies were tested chemically.     

Optimization of Pellet Production from Agro-Industrial By-Products: Effect of Plasticizers on Properties of Pellets and Composite Pots

The present study aimed to optimize the pellets formulation (deoiled rice bran, potato peel powder and plasticizers) for the development of the injection molded pots. The maximum hardness and bulk density (desirable responses) were obtained for pellets having 100 g of deoiled rice bran, 100 g potato peel powder and 14 % of cashew nut shell liquid (CNSL) as well as 14 % of glycerol (GL) (on raw material basis). The optimized pellets and the pots developed from them were characterized for their physico-chemical, functional, rheological and morphological properties. Expansion ratio, pellet durability index and hardness of the pellets with 14 % CNSL were found to be 1.097, 98.647 % and 485.551 N, respectively. For pellets with 14 % GL expansion ratio, pellet durability index and hardness were found to be 1.150, 97.747 % and 462.949 N, respectively. The biodegradation analysis of the pots developed from optimized pellets with 14 % CNSL and GL degraded in 11 and 9 weeks, respectively. Porosity, puncture force, density and hardness of ‘AP’ pots were 27.473 %, 495.731 N, 1.549 g/ml and 542.641 N, respectively. However, for ‘BP’ pots, the porosity, puncture force, density and hardness were 32.548 %, 440.149 N, 1.191 g/ml and 507.841 N, respectively. Pots prepared from 14 % CNSL (AP) were better in physical and mechanical properties as compared to pots developed from glycerol.     

Field evaluation of resistivity sensors for in situ moisture measurement in a bioreactor landfill

The ability of resistance-based sensors to measure in situ waste moisture content in a landfill was examined. One hundred and thirty-five resistance-based sensors were installed in a leachate recirculation well field at a bioreactor landfill in Florida, US. The performance of these sensors was studied for a period of over 6 years. The sensors were found to respond to an increase in moisture resulting from leachate recirculation. It was observed that 78% of sensors worked successfully in the field during the study period. The initial spatial average moisture content determined by the sensor readings (using a laboratory-derived calibration) was 42.8% compared to 23% from gravimetric readings. Eighteen sensors (13%) showed that they were saturated before liquid addition, and no change in moisture content was observed in these sensors during the study period. Laboratory-derived calibration methods resulted in an over-estimation of moisture content. An alternate field-calibration method, where wetted sensor output was assumed equal to the average of gravimetric measurements for wet samples, was evaluated. The final spatial average moisture contents were 64.2% and 44.4% for the laboratory-derived and field-derived calibration methodologies, respectively, compared to 45% measured gravimetrically from excavated waste samples. When moisture content was determined using a mass balance approach, the result was 34.6%. The results suggest that when appropriately calibrated, resistivity-based sensors can be used to obtain a reasonably accurate estimate of local moisture content. However, caution should be taken to extend the moisture content values that are representative of waste surrounding the sensors to estimate the overall moisture content on the landfill-wide scale.     

Case study of landfill leachate recirculation using small-diameter vertical wells

A case study of landfill liquids addition using small diameter (5 cm) vertical wells is reported. More than 25,000 m³ of leachate was added via 134 vertical wells installed 3 m, 12 m, and 18 m deep over five years in a landfill in Florida, US. Liquids addition performance (flow rate per unit screen length per unit liquid head) ranged from 5.6 × 10^?8 to 3.6 × 10^?6 m³ s^?1 per m screen length per m liquid head. The estimated radial hydraulic conductivity ranged from 3.5 × 10^?6 to 4.2 × 10^?4 m s^?1. The extent of lateral moisture movement ranged from 8 to 10 m based on the responses of moisture sensors installed around vertical well clusters, and surface seeps were found to limit the achievable liquids addition rates, despite the use of concrete collars under a pressurized liquids addition scenario. The average moisture content before (51 samples) and after (272 samples) the recirculation experiments were 23% (wet weight basis) and 45% (wet weight basis), respectively, and biochemical methane potential measurements of excavated waste indicated significant (p < 0.025) decomposition.     

Children and the Sphere standard on mental and social aspects of health

Most of the world's children live in resource-poor countries where people are at a relatively high risk of exposure to catastrophic situations arising from conflict and natural disasters.(6) Given the potential social, psychological and psychiatric consequences of exposure to disaster, mental health and psychosocial support programmes are increasingly part of humanitarian aid. A minimum standard on mental and social aspects of health is included in the recently revised Humanitarian Charter and Minimum Standards in Disaster Response (Sphere Handbook) (Sphere Project, 2004). Most recommendations for mental health and psychosocial interventions in guidance documents are based on expert opinion rather than research. Consequently, interventions are being implemented without full understanding of their potential benefit or harm. This paper offers a child-focused review of the evidence for each of the interventions described as indicators for the Sphere standard on mental and social aspects of health. It suggests some, but limited, support for each of them. However, the evidence base needs substantial strengthening.     

Sanitation workers at the frontline: work and vulnerability in response to COVID-19

ABSTRACT

The absence of a vaccine and effective treatment for COVID-19 has created public panic and burdened the health systems in most countries. Along with health workers’, sanitation personnel are also working at the frontlines in the war against the disease by keeping cities clean. Sanitation workers are engaged in Drudgery, Dangerous, Dirty and Dehumanising work that makes them vulnerable for developing the chronic respiratory diseases due to the exposure of various hazardous materials and toxic gases that are emitted from the solid waste. The sanitation workers working on a contractual basis are excluded from the labour policies and welfare programs who are playing a vital role in fighting the pandemic. Women sanitation workers are even more vulnerable because most of them are non-literate, poor in financial management and under-represented in the sanitation employee’s union. The local and state governments should protect and safeguard sanitation workers by providing them with adequate protective equipment, ensure payment of paying adequate salaries and provide them with health insurance.     

Growth in urban extent and allometric analysis of West African cities

Urban area expansion is happening at much faster rates in Asian and African cities than elsewhere in the world. This study uses multi-temporal Landsat images to map the urban extent of six small to large cities in West Africa at four different time steps from the early 1970s–2010. The selected cities are Kumasi of Ghana, Daloa of Cote d’Ivoire, Abuja and Kano in Nigeria, Kindia of Guinea, and Ouagadougou of Burkina Faso. All cities revealed significant urban growth in both urban area and population; however, it was apparent that there was a lot of variability in urban area development. Exponential urban growth rates in the cities were measured as ranging between 0.026 and 0.077, with allometric scaling factors matching those of other countries.     

Multiresidue analysis of neonicotinoids by solid-phase extraction technique using high-performance liquid chromatography

For routine monitoring of pesticides, a multiresidue analysis through solid-phase extraction technique and using high-performance liquid chromatography (HPLC) in cotton seed cake (CSC) has been developed. Extraction of fortified samples was carried out with aqueous acetone under vacuum. The concentrated extract was loaded onto the solid-phase extraction units, preconditioned with acetonitrile. The extraction units were then washed with hexane and finally eluted with acetonitrile. The pesticide residues were determined using a multiresidue method by reversed-phase HPLC. The average percentage recoveries were found to range between 65.47% and 110% at spiking levels of 10 to 40 mg/kg. The method developed shows a healthy rate of recovery and can successfully be utilized for the extraction and screening of neonicotinoid residues in CSC. The detection limits for imidacloprid, acetamiprid, and thiacloprid using this method were found to be 5, 10, and 20 mg/kg, respectively.     

Organochlorine Pesticide Residues in Wheat and Drinking Water Samples from Jaipur, Rajasthan, India

The organochlorine pesticide contamination in dietary sources has caused serious threat to the human progeny. The present study was therefore conducted to evaluate the pesticide contamination in wheat flour and drinking water from Jaipur City, Rajasthan, India using Gas Chromatograph. All the wheat and water samples were found to be contaminated with various organochlorine pesticide residues of DDT and its metabolites, HCH and its isomers, heptachlor and its expoxide and aldrin. The amount of pesticide detected in wheat flour was higher than the permissible limits prescribed by WHO/FAO. In drinking water only a few pesticides exceeded the permissible limits. Seasonal variations of pesticides residues were also observed during the study period.