Electrolytic removal of Rhodamine B from aqueous solution by peroxicoagulation process

Peroxicoagulation treatment of aqueous solution containing hazardous dye, Rhodamine B, with commercially available graphite as cathode and iron as anode has been studied. The effect of various operational parameters such as solution pH, applied voltage, electrode area, other ions, etc. on the dye removal was investigated. The experimental result showed that pH-regulated peroxicoagulation system is an efficient process for the dye removal. Ninety-five percent of the dye was removed after 180 min of electrolysis. Anions such as carbonate, bicarbonate, chloride and sulphate negatively affected the efficiency of peroxicoagulation system. From the present study, it can be concluded that peroxicoagulation process is an efficient tool for dye removal from aqueous solution.     

Electrochemical oxidation of azo dyes in water: a review

Environmental Chemistry Letters - Pollution of waters by azo dyes is a major global issue because some azo dyes have carcinogenic and mutagenic effects. Therefore, advanced methods are required to...     

Degradation of dyes from aqueous solution by Fenton processes: a review

Several industries are using dyes as coloring agents. The effluents from these industries are increasingly becoming an environmental problem. The removal of dyes from aqueous solution has a great potential in the field of environmental engineering. This paper reviews the classification, characteristics, and problems of dyes in detail. Advantages and disadvantages of different methods used for dye removal are also analyzed. Among these methods, Fenton process-based advanced oxidation processes are an emerging prospect in the field of dye removal. Fenton processes have been classified and represented as “Fenton circle”. This paper analyzes the recent studies on Fenton processes. The studies include analyzing different configurations of reactors used for dye removal, its efficiency, and the effects of various operating parameters such as pH, catalyst concentration, H₂O₂ concentration, initial dye concentration, and temperature of Fenton processes. From the present study, it can be conclude that Fenton processes are very effective and environmentally friendly methods for dye removal.     

Burden of disease for workers attributable to exposure through inhalation of PPAHs in RSPM from cooking fumes

Environmental Science and Pollution Research - Polycyclic aromatic hydrocarbons (PAHs), some of which are classified as possible carcinogens (WHO), have been detected in cooking fumes in...     

Fluoride sorption by treated fly ash: kinetic and isotherm studies

High fluoride levels in drinking water have become a critical health hazard. In the present study, the performance of magnesia-loaded fly ash adsorption in the removal of fluoride from aqueous solution was investigated in a batch study. The effect of contact time, dosage, pH, temperature and agitation speed was studied at different values. The maximum removal efficiency was 88 % at 150 min. The effective dose of adsorbent was found to be 2.5 g/l. The optimum pH was found to be at pH 4. Kinetic studies and isotherm studies were also performed to understand the ability of the adsorbents. The monolayer adsorption capacity determined from the Langmuir adsorption equation was found to be 11.61 mg/g. The kinetic measurements suggested the involvement of pseudo-second-order kinetics in adsorption and were controlled by a particle diffusion process. Overall, the results of this study suggest that magnesia-loaded fly ash is an environmentally friendly, efficient and low-cost adsorbent, useful for the removal of fluoride from aqueous solution.     

Iron-loaded mangosteen as a heterogeneous Fenton catalyst for the treatment of landfill leachate

Iron-loaded mangosteen shell powder (Fe-MSP) was found as an effective heterogeneous Fenton catalyst for the treatment of stabilized landfill leachate. Sonolytically produced catalyst has higher efficiency than other catalysts. At the optimal conditions (pH 3, catalyst concentration of 1,750 mg/L and hydrogen peroxide concentration of 0.26 M), 81 % of the chemical oxygen demand (COD) was removed effectively from the landfill leachate. But, the efficiency of Fe-MSP was reduced in the first recycling due to the poisoning of active sites. A metal leaching study indicated that the degradation of the pollutant is mainly due to solid Fe ions present in Fe-MSP rather than the leached ferrous and ferric ions. Hydroxyl radical production in the system was confirmed by the Fenton oxidation of benzoic acid. Compared to the homogeneous Fenton process, the heterogeneous Fenton process using Fe-MSP had higher COD removal efficiency, indicating the practical applicability of the prepared catalyst.     

Aqueous mineral carbonation of ultramafic material: a pre-requisite to integrate into mineral extraction and tailings management operation

Environmental Science and Pollution Research - Ex situ aqueous mineral carbonation of ultramafic mining waste is an evolving technology for the CO2 sequestration from small- to medium-scale...     

Removal of organic pollutants by peroxicoagulation

Peroxicoagulation is an electrochemical advanced oxidation processes in which both ferrous ions and hydrogen peroxide are generated in the cell. Organic pollutants are thus removed by degradation and coagulation. The peroxicoagulation process is a combination of electro-Fenton and electrocoagulation processes. The peroxicoagulation process is very efficient for the removal of aniline and herbicides from water and for the treatment of landfill leachate and textile wastewaters. Under acidic conditions, electro-Fenton is the predominant removal means, whereas electrocoagulation is the main removal means under neutral and alkaline conditions. As a consequence, pH regulation to acidic conditions is essential for the mineralization of organic pollutants.     

Utilization of textile effluent wastewater treatment plant sludge as brick material

In the present work, the feasibility of using sludge generated in wastewater treatment plants of textile industry as a partial replacement for clay in the conventional brick manufacturing process is examined. Physico-chemical properties of the sludge and clay were studied. The characteristics of bricks with replacement of sludge (0–50 %) with an increment of 3 % were determined. All the brick samples satisfied the requirements of Indian Standards norms in terms of weight loss on ignition. The bricks with sludge up to 15 % satisfied the prescribed norms for compressive strength and water absorption. Results also showed that the brick weight loss on ignition was mainly attributed to the organic matter content in the sludge being burnt off during the firing process. The characteristics of bricks such as efflorescence, density and weight loss on ignition for bricks with replacement of clayey soil with textile sludge up to 15 % also satisfied the requirements of the Indian Standard. Thus, textile sludge up to 15 % can be effectively added to make brick material.