Gender (in)difference in private offices: A holistic approach for assessing satisfaction and personalization

This research is a combination of gender studies, which highlights differences between men and women, and workplace research, which focuses on the performances that are assumed to affect employee satisfaction. The study proposes a multi-dimensional assessment model that enables consideration of several workplace issues in tandem. Focusing on user satisfaction, the first part of the study is a holistic approach concerned with technical, functional and behavioral variables that provides a broad understanding about gender (in)differences. Personalization, the core issue of the second part of the study, is measured through personal display items, autonomous behavior and office layout preferences of men and women employees. The findings indicate the presence of significant gender differences in terms of satisfaction felt with regard to the behavioral variables. The results also support previous findings indicating that men and women use different personal display items in order to personalize their offices. More women were diagnosed to be changing their room layout on a temporary basis whereas men and women were evidenced for having similar attitudes in making permanent changes and in preferring an office layout for themselves. The findings suggest that gender difference is still a valid subject in workplace research although the differences may not be as sharp as the conventional gender difference myth claims, implying a better understanding of the issues that differently satisfy men and women.     

Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard composites

This study investigated some of the important physical (thickness swelling) and mechanical (modulus of rupture, modulus of elasticity and internal bond) properties of single-layer particleboard panels made from eucalyptus (Eucalyptus camaldulensis Dehn.), waste of grass clippings (Lolium perenne L.) and combinations of the two. The chemical properties (pH, holocelluse and alpha cellulose contents, and water, alcohol-benzene and 1% sodium hydroxide solubilities) of the raw materials were also determined. Panels with a 6:94 ratio of grass-to-eucalyptus particles had the required mechanical properties for interior fitments including furniture and general uses. Boards manufactured with 100% grass clippings exhibited the lowest quality. The overall panel properties improved with a lower percentage of grass clippings added. Based on initial results, it also appears that grass should compose no more than 13% to achieve acceptable panel properties for interior fitments and general uses.     

Nearest neighbor methods for testing reflexivity

Nearest neighbor (NN) methods are widely employed for drawing inferences about spatial point patterns of two or more classes. We introduce a method for testing reflexivity in the NN structure (i.e., NN reflexivity) based on a contingency table which will be called reflexivity contingency table (RCT) henceforth. The RCT is based on the NN relationships among the data points and was used for testing niche specificity in literature, but we demonstrate that it is actually more appropriate for testing the NN reflexivity pattern. We derive the asymptotic distribution of the entries of the RCT under random labeling and introduce tests of reflexivity based on these entries. We also consider Pielou’s approach on RCT and show that it is not appropriate for completely mapped spatial data. We determine the appropriate null hypotheses and the underlying conditions/assumptions required for all tests considered. We investigate the finite sample performance of the tests in terms of empirical size and power by extensive Monte Carlo simulations and illustrate the methods on two real-life ecological data sets.     

Multiple comparisons of organic,microbial, and fine particulate pollutants in typical indoor environments: Diurnal and seasonal variations

This study was performed to investigate the possible sources as well as seasonal and diurnal variations of indoor air pollutants in widely used four different environments (house, office, kindergarten, and primary school) in which people spend most of their time. Bioaerosol levels and species, volatile organic compound (VOC) levels, and PM_2.5 (particulate matter with an aerodynamic diameter ≤2.5 μm) levels were determined in different parts of these environments in parallel with outdoor sampling. Air pollution samplings were carried out in each microenvironment during five subsequent days in both winter and summer in Ankara, Turkey. The results indicated that bioaerosol, VOC, and PM_2.5 levels were higher in the winter than in the summer. Moreover, PM_2.5 and bioaerosol levels showed remarkable daily and diurnal variations, whereas a good correlation was found between the VOC levels measured in the morning and in the afternoon. Bacteria levels were, in general, higher than fungi levels. Among the VOCs, toluene was the most predominant, whereas elevated n-hexane levels were also observed in the kindergarten and the primary school, probably due to the frequent wet cleaning during school days. According to factor analysis, several factors were found to be significantly influencing the indoor air quality (IAQ), and amongst them, VOC-based products used indoors ranked first. The overall results indicate that grab sampling in naturally ventilated places may overestimate or underestimate the IAQ due to the inhomogeneous composition of indoor air caused by irregular exchanges with the outdoor air according to the season and/or occupants' habits.

Implications Seasonal and diurnal variations of VOCs, PM_2.5, bioaerosols in house, office, and schools were observed, in which PM_2.5 and bioaeorosols showed marked both intra- and interday variability, but VOCs did not. VOC-containing products were the most common source of air pollutants affecting the indoor air quality. External factors affecting the indoor air quality were season and indirectly ventilation. A grab sample cannot be representative in evaluating the air quality of a naturally ventilated environment precisely.     

Modeling 4-Chlorophenol Removal from Aqueous Solutions by Granular Activated Carbon

Since phenols and phenolic compounds in many industrial wastewaters are toxic organic contaminants for humans and aquatic life, to remove these compounds via the most efficient way is very important for environmental remediation treatment. In this context, almost all of the isotherm models (Freundlich, Langmuir, Temkin, Redlich–Peterson, Sips, and Khan) for adsorption in the literature were applied to explain the adsorption mechanism of 4-chlorophenol on activated carbon in this study. Also theoretical modeling data were obtained using model equations; interpolation and analysis of variance were made to compare data by using statistics software. In addition, the thermodynamic and kinetic studies for adsorption mechanism were included in the article. The adsorption of 4-chlorophenol on activated carbon fits well to the pseudo-first-order kinetic model than the pseudo-second-order, intraparticular diffusion and Bangham models. It is also indicated that 4-chlorophenol adsorption by granular activated carbon would be attributed to a type of transition between physical and chemical adsorption rather than a pure physical or chemical adsorption process. As a result, an environmental remediation problem and the adsorption mechanism on activated carbon that can be regarded as a solution to this problem are described and explained using the mathematical models and calculations in this study.     

Solid phase extraction of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) ions with 1-(2-thiazolylazo)-2-naphthol loaded Amberlite XAD-1180

A new method for separation and preconcentration of trace amounts of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) ions in various matrices was proposed. The method is based on the adsorption and chelation of the metal ions on a column containing Amberlite XAD-1180 resin impregnated with 1-(2-thiazolylazo)-2-naphthol (TAN) reagent prior to their determination by flame atomic absorption spectrometry (FAAS). The effect of pH, type, concentration and volume of eluent, sample volume, flow rates of sample and elution solutions, and interfering ions have been investigated. The optimum pH for simultaneous retention of all the metal ions was 9. Eluent for quantitative elution was 20 ml of 2 mol l(-1) HNO(3). The optimum sample and eluent flow rates were found as 4 ml min(-1), and also sample volume was 500 ml, except for Mn (87% recovery). The sorption capacity of the resin was found to be 0.77, 0.41, 0.57, and 0.30 mg g(-1) for Cu(II), Ni(II), Cd(II), and Mn(II), respectively. The preconcentration factor of the method was 200 for Cu(II), 150 for Pb(II), 100 for Cd(II) and Ni(II), and 50 for Mn(II). The recovery values for all of the metal ions were > or = 95% and relative standard deviations (RSDs) were < or = 5.1%. The detection limit values were in the range of 0.03 and 1.19 microg l(-1). The accuracy of the method was confirmed by analysing the certified reference materials (TMDA 54.4 fortified lake water and GBW 07605 tea samples) and the recovery studies. This procedure was applied to the determination of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) in waste water and lake water samples.     

The assessment of the relationship between various waterscapes and outdoor activities: Edirne,Turkey

The environment is very important in terms of the behaviours and actions of human beings, and activity–environment correlation is used frequently in outdoor arrangements. The environment must meet the requirements and expectations of society. Outdoor activities are the activities that contribute to the well-being of human beings in physical (heartbeat, respiration, blood pressure, etc.) (Ulrich, Journal of Environmental Psychology 11:210–230, 1991), psychological (fear, anxiety, depression, loneliness, stress, etc.) (Marcus and Barnes 1999) and behavioural (insomnia, nervousness, restlessness, passivity, etc.) (Ulrich 1999) terms. It is known that human beings are affected significantly by the environments they are in, and more importantly, it is known that the environment they are in affects their happiness status. The causes of this effect are the features and appearances of the spatial elements and components that mainly make up such environments. One of the elements that is used frequently in landscape is water. If one examines designed or natural open spaces, it may be observed that water has very distinctive features. Dynamic (in the form of a leak, with intense flow rate, cascade, foamy, squirting, jet, graded, etc.) and still water elements may be used with sculptures, plants, rocks and elevations (on land). This study aims to reveal which age groups of students enjoy the different types of activities with regards to water features and emotional associations that motion and characteristics of water bring out in human beings and also to reveal the water preferences of human beings, including their reasons for such preference. Thus, 20 different water compositions located in Edirne Province were selected, and in 2-min camera reels, the students of various age groups assessed water with various characteristic features via a survey. As a result, it was revealed that human beings from various age groups wish to perform different activities with water elements having distinctive characteristic features, and the types of water elements that are subject to various age groups’ like and dislike were determined. Kruskal–Wallis test was used during testing the effect of age differences. Chi-square analysis was used in order to examine the effect of age differences on preferences with regards to the activities that shall be performed at locations that include utilization of various water elements. The results reveal that while the use of water should be allowed in landscaping, selections regarding the elements of these water features should be made based on the type of activity and the age group of users in relation to the location.     

Assessing local planning capacity to promote environmentally sustainable residential development

Smart growth and sustainability planning have, in recent years, become central issues in planning discourse. Scholars have argued that planning capacity at the local government level is critical for smart growth planning, and that planners have a fundamental role to play in advancing local and regional sustainability. In this paper, we investigate the extent to which local planning capacity enables communities to promote more sustainable, smart growth residential development. Based on a 2013 survey of 38 county and 53 municipal governments in the state of Wisconsin, USA, this study finds that the majority of the sample communities have permitted residential developments characterized as transit-oriented, New Urbanist, mixed use, infill developments, or conservation subdivisions as alternatives to low-density, automobile-dependent conventional developments. The study also finds that jurisdictions with higher planning capacities are more likely to overcome significant barriers to more sustainable residential development.     

Scope for growth of Mytilus?galloprovincialis (Lmk., 1819) in oligotrophic coastal waters (Southern Tyrrhenian Sea, Italy)

The ‘scope for growth’ (SFG) tool was used to study the growth performance of cultivated populations of Mytilus galloprovincialis (Lmk., 1819) in an oligotrophic area of the Southern Mediterranean Sea. The study was carried out between 1993 and 1996 by using data from four seasonal oceanographic cruises and from growth experiments. Water samples were collected and analysed for total suspended matter (TSM), particulate organic carbon (POC) and nitrogen (PON), particulate lipids, proteins and carbohydrates and chloropigments. The sum of the carbon equivalents of carbohydrates, proteins and lipids is indicated as the total biopolymeric particulate organic carbon (BPC) and was converted into a unit of energy in order to calculate the SFG of a theoretical mussel of 5 cm length. In order to test the performance of mussel growth at two depths (5 and 15 m water depth), mussel body size [as ash free dry weight (AFDW)] and the actual concentrations of BPC were used to calculate the monthly SFG using the physiological energetic relationships suggested in the current literature. Data from the field cruises led us to characterise the study site as ultra-oligotrophic (annual average of chloropigment concentration approximately 0.5 μg L⁻¹). SFG calculations allowed us to identify a site where mussels grown successively were found to reach a commercial size in approximately 12 months. The good agreement obtained between energetic response and subsequent production response suggests that the available energy from particulate food could be fully available for organic production for maintaining “proportionate” growth trajectories, even in a ultra-oligotrophic system.