Polychlorinated biphenyl (PCB) anaerobic degradation in marine sediments: microcosm study and role of autochthonous microbial communities

Polychlorobiphenyl (PCB) biodegradation was followed for 1 year in microcosms containing marine sediments collected from Mar Piccolo (Taranto, Italy) chronically contaminated by this class of hazardous compounds. The microcosms were performed under strictly anaerobic conditions with or without the addition of Dehalococcoides mccartyi, the main microorganism known to degrade PCBs through the anaerobic reductive dechlorination process. Thirty PCB congeners were monitored during the experiments revealing that the biodegradation occurred in all microcosms with a decrease in hepta-, hexa-, and penta-chlorobiphenyls (CBs) and a parallel increase in low chlorinated PCBs (tri-CBs and tetra-CBs). The concentrations of the most representative congeners detected in the original sediment, such as 245-245-CB and 2345-245-CB, and of the mixture 2356-34-CB+234-245-CB, decreased by 32.5, 23.8, and 46.7 %, respectively, after only 70 days of anaerobic incubation without any bioaugmentation treatment. Additionally, the structure and population dynamics of the microbial key players involved in the biodegradative process and of the entire mixed microbial community were accurately defined by Catalyzed Reporter Deposition Fluorescence In Situ Hybridization (CARD-FISH) in both the original sediment and during the operation of the microcosm. The reductive dehalogenase genes of D. mccartyi, specifically involved in PCB dechlorination, were also quantified using real-time PCR (qPCR). Our results demonstrated that the autochthonous microbial community living in the marine sediment, including D. mccartyi (6.32E+06 16S rRNA gene copy numbers g^?1 sediment), was able to efficiently sustain the biodegradation of PCBs when controlled anaerobic conditions were imposed.     

Assessment of the leaching of metallic elements in the technology of solidification in aqueous solution

Results are presented of experiments performed to optimize the solidification/stabilization system for metallic elements in aqueous solution. This system involves mixing cement and a solution of metallic elements in a conventional mixer: the paste thus obtained is transferred drop by drop into a recipient filled with an aqueous solution of NaOH at 20% by weight, in which it solidifies immediately. The separate use of chloride solutions of Li+, Cr3+, Pb2+ and Zn2+ makes it possible to obtain granules displaying various levels of compressive strength. Three different inertization matrices were used in the experiments, the first consisting solely of Portland cement, the second of Portland cement and a superplasticizer additive, and the third of Portland cement partially replaced with silica-fume and superplasticizer. The results of the tests performed showed a very low level of leaching into the alkaline solidification solution for Cr3+, the quantity leached being under 2% as against higher levels for the other metallic elements. For all the considered elements, the best results were obtained by using silica-fume in the inertization matrix.     

Drivers and barriers to a circular economy adoption: a sector perspective on rare earth magnets

Journal of Material Cycles and Waste Management - The transition from the current linear to a circular economy (CE) is a great challenge, especially in industries where the theme was barely...     

Microbial and kinetic characterization of pure and mixed cultures aerobically degrading 4-nitrophenol

The molecular and kinetic characterization of a microorganism able to aerobically degrade 4-nitrophenol (4NP) is presented. The microorganism was isolated from a mixed culture operating in a laboratory-scale sequencing batch reactor with an aerobic anoxic cycle. It was identified as a member of Ralstonia genus within Betaproteobacteria. It is a gram negative coccobacillum (cell length of 2-3 microm) able to aerobically store lipid inclusions when grown aerobically on nitrophenol as the sole carbon source in the range of tested concentrations (80-320 mg l(-1)). Batch kinetic tests were performed with the pure culture, while the kinetics of the mixed biomass was directly investigated in the reactor. For pure cultures exponential growth was observed, with growth rate values in the range of 2-6 d(-1); in experiments with the mixed cultures 4NP concentrations were correlated with growth using the Haldane equation (k(max) = 0.30 mg 4NP mg(-1) VSSh(-1); K(s) = 55 mg 4NPl(-1) and K(I) = 15 mg 4NPl(-1)). Observed pure culture growth rates were higher than those of mixed cultures. This result can be explained by considering that in mixed culture the biomass is evaluated as volatile suspended solids, including both specialized biomass for 4NP removal and denitrifying bacteria.     

The PAF model: an integrated approach for landfill sustainability

Lab-scale tests were set up to investigate different options for achieving sustainability by reducing long-term landfill emissions. The options which have been studied and compared with the traditional anaerobic landfill for unprocessed refuse were: mechanical-biological pretreatment, landfill aeration with forced and with natural advective air flow (semi-aerobic), flushing. Combination of different options have been experimented. The combination of mechanical-biological Pretreatment, Aeration by the semi-aerobic method and Flushing (PAF model) seems to synergize the advantages of the individual options. The research is ongoing and further studies are necessary in order to assess the full-scale applicability of the model.     

Development of a new automated clean-up system for the simultaneous analysis of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and 'dioxin-like' polychlorinated biphenyls (dl-PCB) in flue gas emissions by GPC-SPE

A comprehensive clean-up method for quantitative analysis of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins and dibenzo-furans (PCDD/Fs) in one single extract of environmental samples was developed. Since the chemical nature and toxicity of planar PCBs are similar to those of PCDD/Fs, dioxin-like PCBs and PCDD/Fs are often surveyed together in their exposure assessments. The development of a method for the simultaneous analysis of PCBs and PCDD/Fs in environmental samples is invaluable. The automated clean-up system evaluated in this work consists of three additional steps after traditional extraction: the chromatography on gel permeation (GPC), the concentration of the solvent through the use of an in-line evaporation module and the further purification and separation of PCDDs/Fs and dl-PCBs on an alumina cartridge in the 'SPE module'. In this work, three fly ash samples from an interlaboratory study with different PCDD/F and PCB levels were Soxhlet-extracted and then cleaned up using an automated system. PCDD/Fs and PCBs were determined using isotope dilution and high resolution gas chromatography/high resolution mass spectrometry. The determined values of 17 PCDD/Fs were consistent with the certified values and the relative standard deviations (RSDs) of the determined values were less than 20%. The recoveries of (13)C labeled PCDD/Fs and planar PCBs, and their RSDs were within the ranges specified in EPA1613 and 1668a methods, respectively. An accurate and reliable method was successfully developed and can be used in the simultaneous analysis of PCDD/Fs and planar PCBs in environmental samples.     

Molecular phylogeography of two Italian sibling species of Calobius (Coleoptera, Hydraenidae, Ochthebiinae) inhabiting Mediterranean marine rock-pools

Marine rock-pools, commonly found along the Mediterranean coasts, are isolated patches of habitat characterised by large spatial and temporal variations. The phylogeography of Calobius quadricollis and C. urbanelliae, two sibling species of moss beetles (Coleoptera, Hydraenidae) inhabiting Italian temporary marine rock-pool ecosystems, were studied using mitochondrial cytochrome c oxidase subunit I (COI). Our data suggest a strong association between the scored genetic variability and the geographical distribution of populations sampled for both species. These analyses provided evidences of episodic species range expansion and fragmentation, recurrent “flush and crash” and bottleneck episodes probably occurring during the Glacial Cycles. The observed phylogeographical pattern is probably related to the historical and biogeographical processes of Mediterranean areas, as well as both to the ephemeral habitat tipology and limited dispersal ability of these beetles.     

Water and soil contaminated by arsenic: the use of microorganisms and plants in bioremediation

Environmental Science and Pollution Research - Owing to their roles in the arsenic (As) biogeochemical cycle, microorganisms and plants offer significant potential for developing...     

Extent of intracellular storage in single and dual substrate systems under pulse feeding

The study investigated the effect of acetate/starch mixture on the formation of storage biopolymers as compared with the storage mechanism in systems fed with these compounds as single substrates. Experiments involved two sequencing batch reactor sets operated at steady state, at sludge ages of 8 and 2 days, respectively. Each set included three different runs, one fed with acetate, the other with starch and the last one with the acetate/starch mixture. In single substrate systems with pulse feeding, starch was fully converted to glycogen, whereas 25 % of acetate was utilized for direct microbial growth at sludge age of 8 days, together with polyhydroxybutyric acid (PHB) storage. The lower sludge age slightly increased this fraction to 30 %. Feeding of acetate/starch mixture induced a significant increase in acetate utilization for direct microbial growth; acetate fraction converted to PHB dropped down to 58 and 50 % at sludge ages of 8 and 2 days respectively, while starch remained fully converted to glycogen for both operating conditions. Parallel microbiological analyses based on FISH methodology confirmed that the biomass acclimated to the substrate mixture sustained microbial fractions capable of performing both glycogen and PHB storage.     

Pharmaceuticals in the Environment in Italy: Causes, Occurrence, Effects and Control

- DOI: http://dx.doi.org/10.1065/espr2006.01.004 Background, Aim and Scope Environmental contamination by pharmaceuticals is an emerging issue. Until recently, information on medicinal substances released into the environment was scant, but several studies have now been published. Data are, however, usually scattered and a systematic approach to this subject is generally lacking. Moreover, because of differences in the prevalence of diseases, treatment habits and options, or simply for market reasons, the pollution profile can differ significantly in different countries. The aim of this work is to review the papers dealing with environmental contamination by pharmaceuticals in Italy, with the aim of providing a comprehensive view on a national scale. Methods Papers related to environmental contamination by pharmaceuticals in Italy were reviewed, in order to offer a comprehensive view of this subject. Topics included analysis, occurrence, monitoring, modelling, treatment, control of the emissions, and ecotoxicological effects of pharmaceuticals in the environment. Results and Conclusion The literature suggests that pharmaceuticals are widespread contaminants, entering the environment from a myriad of scattered points. Patients, in case of drugs for human use, or animals for veterinary drugs, are the main sources of contamination. Pharmaceuticals can be ranked according to environmental loads, predicted by multiplying sales figures by the rate of metabolism in man or animals. Priority pharmaceuticals, i.e. the molecules of concern for the environment, can be measured in waste and surface water by liquid chromatography-tandem mass spectrometry, and the loads detected are generally comparable to the predicted ones. Pharmaceuticals are designed to stimulate a response in humans and animals at low doses, with a very specific target, so the implications for human health and the environment need to be assessed. In vitro and in vivo studies suggest that pharmaceutical principles, taken singularly or in combinations, and concentrations close to those detected in the environment, may have ecotoxicological effects. The sewage system is an important point in the control of contamination, but sewage treatment plants are not able efficiently to abate a substantial part of water-borne pharmaceuticals. Several variables play a role, however, in the processes of waste water treatment, and could be specifically adjusted to improve the efficiency of drug abatement, mitigating the potential environmental hazards. Recommendation and Perspective Pharmaceuticals in the environment are becoming a subject of global concern, with potential environmental consequences. Further knowledge of the causes, occurrence and effects of drugs as environmental pollutants is necessary for a better understanding of this ecological issue, as well as to improve abatement strategies, and to mitigate subtle environmental consequences.