The estimation of PAH bioavailability in contaminated sediments using hydroxypropyl-beta-cyclodextrin and Triton X-100 extraction techniques

A study was conducted to investigate whether cyclodextrins and surfactants can be used to predict polycyclic aromatic hydrocarbon (PAH) bioavailability in contaminated sediments. Two sediment samples were extracted with aqueous solutions of hydroxypropyl-beta-cyclodextrin (HPCD) and Triton X-100. PAH removal during extraction was compared with PAH removal during biodegradation and solid-phase extraction. The latter two methods were used as reference methods to establish which part of the PAHs could be biodegraded and to what extent biodegradation was governed by bioavailability limitations. It was demonstrated that HPCD extraction followed solid-phase extraction and removed primarily readily bioavailable PAHs, while Triton X-100 extracted both readily and poorly bioavailable PAHs. Moreover, HPCD did not affect the degradation of PAHs in biodegradation experiments, while Triton X-100 enhanced the degradation of low molecular weight PAHs. It was concluded that HPCD extraction may provide a good method for the prediction of PAH bioavailability. Triton X-100 extraction is unfit for the prediction of PAH bioavailability.     

Amorphous and condensed organic matter domains: the effect of persulfate oxidation on the composition of soil/sediment organic matter

The composition of amorphous and condensed soil/sediment organic matter (SOM) domains was investigated for one soil sample and four sediment samples. These samples were oxidized with persulfate to remove amorphous SOM, before and after which the composition of SOM was studied by thermogravimetric analysis, pyrolysis-GC/MS, and cross polarization magic angle spinning 13C-NMR. Comparison of the SOM composition before and after oxidation showed that condensed SOM was more thermostable and less polar than amorphous SOM. Condensed SOM was relatively low in O-alkyl C and carboxyl C and it was likely to contain only small amounts of labile organic components (carbohydrates, peptides, fatty acids). Apart from these general characteristics, the composition of the condensed and amorphous domains appeared to be highly dependent on the origin and nature of the SOM investigated. Condensed domains in relatively undecomposed SOM were enriched in aliphatic C, whereas condensed domains in relatively weathered SOM were enriched in aromatic C. Altogether, the compositional changes upon persulfate oxidation were similar to the compositional changes upon humification, which supports the idea that weathered SOM is more condensed than the original material.     

Environmental and Biological Assessment of Exposure to Benzene in Petroleum Workers

Occupational exposure to benzene was measured in two gasoline marketing terminals and five major refineries in Singapore. A total of 280 workers were monitored over two years. This assessment was carried out with two primary objectives: (1) To find out the extent of occupational exposure to benzene in the petroleum industry in Singapore, (2) To identify suitable biomarkers for monitoring of low levels of benzene exposure. The exposure was measured in five different categories of petroleum and petrochemical workers, i.e., truck drivers, despatch assistant, process operators, oil movements operators and laboratory technicians. The results revealed wide variations in exposure, from 0.01 to 13.6 ppm for personal time weighted average (TWA) exposure over the whole workshift. The exposure of truck drivers appeared to be the highest, with geometric mean (GM) of 1.98 ppm (ranged from 0.25 to 13.6 ppm). The average benzene exposure for process operators was relative low with a GM of 0.04 ppm. Lowest benzene exposure was found in the laboratory technicians, with a GM of 0.02 ppm. As cigarette smoking is known to affect metabolism of benzene, data analyses on the relationships with environmental exposure were conducted only on the 190 nonsmokers. The results showed that urinary trans, trans-muconic acid (ttMA), unmetabolized benzene in urine (UBZ) and benzene in blood (BBZ) were better biomarkers for low level benzene exposure as compared to urinary phenolic metabolites in urine, such as hydroquinone, phenol and catechol.     

Prediction of complete bioremediation periods for PAH soil pollutants in different physical states by mechanistic models

Mass-transfer models and biodegradation models were developed for three theoretical physical states of polycyclic aromatic hydrocarbons (PAHs) in soil. These mechanistic models were used to calculate the treatment periods necessary for complete removal of the PAH pollutants from the soil under batch conditions. Results indicate that the bioremediation of PAHs in such systems is mainly mass-transfer limited. The potential for bioremediation as a treatment technique for PAH contaminated soils is therefore mainly determined by the mass-transfer dynamics of PAHs. Under mass-transfer limited conditions simplified mathematical models, based on the assumption of a zero dissolved PAH concentrations, can be used to predict the period of time needed for complete bioremediation.     

Enhancement of PAH biodegradation in soil by physicochemical pretreatment

The effects were studied of short-term heating of contaminated soil and its soaking in an organic solvent on the subsequent biodegradation of PAHs. In a clayey dredged sludge with a high organic-matter content (12%), heating at 120°C for one hour increased the degree of degradation after 21 days of an aged PAH contamination from 9.5 ± 0.7% to 27 ± 5%. Lower temperatures resulted in smaller increases. The observed increase in biodegradation is caused by either transfer of PAHs from sorption sites with low desorption rates to those with high ones or transformation of slow-sorption sites into fast-sorption ones. Soaking of the above sludge in a 4:1 (v/vj acetone-water mixture increased the degree of degradation from 9.5 ± 0.7% to 20.4 ± 1.4%, probably as a result of dissolution of the PAHs in the pore liquid during soaking. Thermal pretreatment of a contaminated sandy soil with a low organic-matter content showed no significant effect on the degradation of aged PAHs. Soaking of the sandy soil increased the degradation of only PAHs of high molecular weight, namely from 24 ± 5% to 48 ± 7%.     

A GIS-based approach for the long-term prediction of human health risks at contaminated sites

A Health Index/Risk Evaluation Tool (HIRET) has been developed for the integration of risk assessment and spatial planning using GIS capabilities. The method is meant to assist decision makers and site owners in the evaluation of potential human health risk with respect to land use. Human health risk defined as the potential adverse effects on human life or health is generally accepted as the most important aspect for site assessment and planning of remediation strategies. It concerns polluted sites that endanger human health on one hand and derelict land that does not cause the immediate risk on the other hand. In current state-of-the-art risk-assessment, long-term spatial and temporal changes of risks, in relation to changes in contamination patterns and land use functions, are not taken into account. The aim of this paper is to demonstrate the methodology developed for human health risk assessment in aspect of spatial and temporal domain. HIRET was developed as an extension for ESRI software ArcView 3.2 and allows performing dynamic human health risk assessment in long-term period, which is relevant for land use planning. The paper illustrates how such methodology can assist in environmental decision-making to enhance the efficiency of contaminated land management. A case study of contaminated site is given showing how data can be used within a GIS framework to produce maps indicating areas of potential human health risk.     

Increasing significance of advanced physical/chemical processes in the development and application of sustainable wastewater treatment systems

The awareness of the problem of the scarcity of water of high quality has strongly changed the approach of wastewater treatment. Currently, there is an increasing need for the beneficial reuse of treated wastewater and to recover valuable products and energy from the wastewater. Because microbiological treatment methods are, only to a limited part, able to satisfy these needs, the role and significance of physical/chemical processes in wastewater treatment are gaining more and more interest. The specific future role and aim of the various physical/chemical treatment processes can be categorized in five groups: improvement of the performance of microbiological treatment processes, achievement of the high quality required for reuse of the effluent, recovery of valuable components and energy from the wastewater for beneficial reuse, desalination of brackish water and seawater, and treatment of concentrated liquid or solid waste residues produced in a wastewater treatment process. Development of more environmentally sustainable wastewater treatment chains in which physical/chemical processes play a crucial role, also requires application of process control and modeling strategies. This is briefly introduced by the elaboration of treatment scenarios for three specific wastewaters.     

Application of a mechanistic desorption-biodegradation model to describe the behavior of polycyclic aromatic hydrocarbons in peat soil aggregates

A procedure was developed to obtain three size fractions (2360 < d(p) < 1000, 1000 < d(p) < 710, and 710 < d(p) < 425 microm) of stable aggregates from Koopveen peat soil by application of an intense mixing regime prior to sieving of the soil material. The organic matter content, aggregation structure and the microstructure of these aggregates were determined and the particles were artificially contaminated with naphthalene and phenanthrene via a solvent phase. A nonlinear Freundlich sorption isotherm was determined for the naphthalene contaminated soil aggregates (n = 0.39; K(F) = 1.13 x 10(-2) m(1.17) kg(-0.39)). The applicability of a mathematical model, that describes sorption equilibrium, intraparticle mass-transfer, and nonlinear bacterial degradation kinetics, was tested by fitting results of dynamic desorption and biodegradation experiments, generated in this study and earlier work on the peat soil aggregates. The experimental data were described adequately although strong variations in the values of the fit parameter, the intra-particle porosity (0.30 < epsilon < 0.88), were found. This indicates the necessity of further investigations.