Production of new concrete with leather tannery waste used as partial replacement of the natural sand

Journal of Material Cycles and Waste Management - Leather production is a technology that boosts the economy because of its versatility and durability. However, the wastes generated throughout the...     

Models for waste life cycle assessment: Review of technical assumptions

A number of waste life cycle assessment (LCA) models have been gradually developed since the early 1990s, in a number of countries, usually independently from each other. Large discrepancies in results have been observed among different waste LCA models, although it has also been shown that results from different LCA studies can be consistent. This paper is an attempt to identify, review and analyse methodologies and technical assumptions used in various parts of selected waste LCA models. Several criteria were identified, which could have significant impacts on the results, such as the functional unit, system boundaries, waste composition and energy modelling. The modelling assumptions of waste management processes, ranging from collection, transportation, intermediate facilities, recycling, thermal treatment, biological treatment, and landfilling, are obviously critical when comparing waste LCA models.This review infers that some of the differences in waste LCA models are inherent to the time they were developed. It is expected that models developed later, benefit from past modelling assumptions and knowledge and issues. Models developed in different countries furthermore rely on geographic specificities that have an impact on the results of waste LCA models. The review concludes that more effort should be employed to harmonise and validate non-geographic assumptions to strengthen waste LCA modelling.     

Assessment of radiological effects on the regional environment due to the operation of the Tokai Reprocessing Plant

The regional environmental radiological effects were assessed for the past 25-year operation of the Tokai Reprocessing Plant (TRP). The assessment was basically performed with the environmental radiological monitoring data around the TRP. For the environmental monitoring, various kinds of terrestrial and marine samples including air dust, surface soil, polished rice grain, leafy vegetable, milk, seawater, seabed sediments, fish, shellfish and seaweed were collected in the surrounding environment of the TRP. Radionuclides such as (3)H, (14)C, (90)Sr, (137)Cs and (239,240)Pu in the environmental samples were determined by radiochemical methods. However, they showed no significant short-term increase or long-term accumulation of radionuclides discharged from the TRP. Therefore, the public dose was evaluated using the mathematical models and the discharge data of radionuclides. The estimated annual effective dose for the public was about 0.1% of the annual effective dose limit recommended by the ICRP. The assessment showed that there were no significant radiological effects on the environment and the public due to the 25-year operation of the TRP.     

Optimization of compost fermentation of glycerol by-product discharged from biodiesel fuel production process

Development of a cheap system for reuse of glycerol by-product discharged from the biodiesel fuel (BDF) production process is needed in parallel with development of a low-cost BDF production system. In this article, optimization of compost fermentation of glycerol by-product was studied. The type and amount of additive nitrogen source was studied, and good utilization of glycerol was observed when 0.5 g of urea was added to a mixture of 625 g dry sawdust, 25 g of microbial seed, and 50 g of glycerol by-product. To achieve efficient compost fermentation, repeated batch fermentation was applied and five batch cultures were repeated. Although the pH level and nitrogen and water contents were maintained at suitable levels for microbial growth, the glycerol consumption rate gradually decreased with accumulation of oily compounds in the compost. Finally, a material cost evaluation of the compost fermentation proposed in this study was performed. The total material cost decreased to ￥0.57 /l of BDF when employing an existing compost system for the fermentation process, although sawdust used for mushroom cultivation was used in this study at the very high cost of ￥123 /kg dry sawdust. However, the cost of disposal of the glycerol byproduct as an industrial waste was ￥5.2 /l of BDF produced; therefore, there might be an economical advantage to compost fermentation of glycerol by-product from BDF production.     

TEMPO-Mediated Oxidation of Norway Spruce and Eucalyptus Pulps: Preparation and Characterization of Nanofibers and Nanofiber Dispersions

This study deals with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation of cellulose. Softwood and hardwood pulp fibers were suspended in water and oxidized to various extents at pH 10 and 22 °C using sodium hypochlorite in the presence of TEMPO radical and sodium bromide. This reaction system is known to be the most efficient one for the introduction of both surface carboxyl and aldehyde groups. Important relationships between formation of these functional groups and the fibrillation yield, light transmittance of the water dispersions and degree of polymerization of the oxidized softwood and hardwood pulps were established in the present study. A birefringence test confirmed the presence of nanofibers which according to atomic force microscopy analyses had diameters in the 1.6–3.8 nm range.     

Reductive dechlorination of non-ortho substituted polychlorinated biphenyls by ultraviolet irradiation in alkaline 2-propanol

The photodechlorination pathways of 3,3′,4,5,5′-pentachlorobiphenyl (3,3′,4,5,5′-PentaCB) and the related lower polychlorinated biphenyl congeners irradiated at 254 nm in alkaline 2-propanol were elucidated. Steric effect is the most important factor for controlling the dechlorination pattern of these substrates. Electronic effect also influences the photoreactivity of chlorine substituents.     

A study on emission of phthalate esters from plastic materials using a passive flux sampler

Phthalate esters are used as plasticizer in many plastics, and several studies have shown their toxicity. Phthalate esters are gradually emitted over time, and so it is conceivable that they pose a significant health risk. This study aims to investigate the temperature dependence of the emissions of various phthalate esters and to estimate the health risks of these emissions at various temperatures. A passive-type sampler was developed to measure the flux of phthalate esters from the surface of plastic materials. With this sampler, we examined three widely used plastic materials: synthetic leather, wallpaper and vinyl flooring. The observed maximum emissions of diethyl phthalate, dibutyl phthalate, and diethylhexyl phthalate (DEHP) from these materials at 20°C were 0.89, 0.77, and 14 μg m⁻² h⁻¹, respectively. Emissions at 80°C were 2.8, 4.5×10², and 1.5×10³ μg m⁻² h⁻¹, respectively. The results showed this temperature dependence is determined primarily by the type of phthalate ester and less so by the type of material. The estimation from the results of temperature dependence indicated the concentration of DEHP in a vehicle left out in the sunshine during the day can exceed the recommended levels of Japan Ministry of Health, Labour and Welfare.     

Field validation of an active sampling cartridge as a passive sampler for long-term carbonyl monitoring

A carbonyl sampler originally designed for the active sampling method (Sep-Pak XPoSure) was used for long-term passive sampling, and its applicability as a passive sampler was examined through field experiments. The uptake rates of passive sampling were determined experimentally from collocated passive and active samplings for various sampling periods. The obtained uptake rates of formaldehyde, acetaldehyde, and acetone were 1.48, 1.23, and 1.08 mL/min, respectively. These uptake rates were consistent for a wide range of the sampling term (12 hr-2 weeks). Uptake rates of each carbonyl were proportional to the diffusion coefficients of each. Therefore, the ratios of diffusion coefficients were used to calculate the uptake rates of carbonyls for which the rates were not determined experimentally. Lower limits of determination were 2.16-17.5 microg/m3 for 2-week sampling. It was confirmed that 2-week monitoring of carbonyl concentrations up to 118-229 microg/m3 was possible. Relative standard deviations of the passive method generated from the repeatability test were 2-12.3% error for five samplings, and the recovery efficiencies were larger than 90%. Thus, the passive sampler was found to be highly suitable for long-term monitoring of carbonyl compounds.     

Identification of nonvolatile neutral organic compounds in tap water

Nonvolatile neutral organic compounds in tap water were examined by high-pressure liquid chromatography, infrared spectrometry, ¹H- and ¹³C-FT-NMR, gel permeation chromatography, elementary analysis, and field desorption mass spectrometry. Neutral organic compounds in 10 m³ of tap water were continuously extracted by the Amberlite XAD-2 resin column, and separated into four fractions by silica-gel column chromatography. Removal of volatile compounds in fraction 3 including polar oxygenated compounds was carried out with microdistillation column under high vacuum by using a diffusion pump. Nonvolatile organic compounds isolated from tap water were identified as poly(vinyl acetate) derivatives with molecular weights ranging from 300 to 1300.     

In vitro evaluation of atmospheric particulate matter and sedimentation particles using yeast bioassay system.

Little information on the evaluation of airborne particulate matter (APM) and sedimentation particles from subway stations is available. The thermal metamorphism of train wheels generating toxic particles in subway stations is a possibility. In this study, the toxicity and physiological effects of particles from subway stations were evaluated using a yeast bioassay system. Estrogenic and antiestrogenic activities of APM in APM extracts from subway stations were determined. No estrogenic activity was found in the APM fractions and their S9-activated APM samples. Sedimentation dust samples also showed no estrogen activity. In contrast, extracts from sedimentation dust samples showed antiestrogen activity. Marked yeast toxicity was observed in the samples extracted from sedimentation dust. Potent yeast toxicity was also found in the S9-activated extracts from sedimentation dust. The results suggest that sedimentation dust from a semiclosed area of a subway system has antiestrogen activity, although both the origin and generation system of this activity are uncertain. These pollutants in sedimentation dust may change to a more toxic form in vivo by S9 activation.