Properties of steel foundry electric arc furnace dust solidified/stabilized with Portland cement

Electric arc furnace dust from steel production is generated in considerable amounts worldwide and needs to be treated as hazardous waste. The aim of this study was to investigate the properties of electric arc furnace dust solidified/stabilized by using Portland cement. Mortar and paste samples were prepared with varying waste-to-binder ratios between 0% and 90%. A comprehensive experimental program was designed including XRF characterization, setting time, unconfined compressive strength, and toxicity characteristics leaching procedure (TCLP), synthetic precipitation leaching procedure (SPLP), and acid neutralization capacity (ANC) tests. The results were evaluated in order to determine if the solidified /stabilized product can be disposed of at a landfill site with domestic waste or at a segregated landfill. The effect of using sand on S/S performance was also investigated. The results indicated that the solidification /stabilization process using PC helps the heavy metals to be bound in the cement matrix, but the TCLP leaching results exceeded the EPA landfilling limits. The SPLP leaching results conformed to the limits implying that the waste or S/S products can be disposed of at a segregated landfill; however the low ANC of the S/S products reveals that there may be leaching in the long-term. The sand used in the mortar samples adversely affected the S/S performance, causing higher heavy metal leaching levels, and lower pH levels in the leachate after the TCLP extraction than those measured in the leachate of the paste samples.     

Wastewater management for Istanbul: basis for treatment and disposal

A number of studies have so far been conducted to assess the magnitude of pollution generated by domestic and industrial sources in the Istanbul Metropolitan Area. They indicate that a management scheme for wastewater treatment and disposal should involve a total discharge of 15.4 m3 s(-1) with a potential pollution load of 330 tons BOD5 day(-1) for 1990. A scheme of this magnitude inevitably requires careful evaluation of receiving water characteristics, both from an oceanographic and a quality standpoint. In this paper significant water quality parameters related to the Black Sea-Bosphorus Strait-Marmara Sea System are reviewed and incorporated in the evaluation of treatment and disposal alternatives. In this context, the pollution exchange between the Mamara Sea and Bosphorus is quantified, pollutant contents of the Mamara Sea and discharges from the Istanbul Metropolitan Area are compared, and a number of scenarios are evaluated to define the optimum treatment and disposal strategy.     

Bioconversion of industrial wastes: paint sludge from automotive manufacturing

The compostability of water-based paint sludge originating from the automotive industry was investigated. Six reactors were operated. Wastewater treatment sludge from the same industry was used as additional substrate, and corncob was used as a bulking agent. The level of paint sludge within the compost mixtures varied between 55 and 85%. All reactors yielded a temperature increase up to thermophilic phase levels (>?40 °C) for a minimum of 5 days, and organic matter and C/N losses were observed. BTEX concentrations decreased during composting. Nickel and tin levels in the final product exceeded the legal compost limits. The calorific value of the compost mixtures increased from 9532 to 18774 kJ/kg at the end of the composting process. It was seen that the process applied in this study can be utilized as a biodrying step before the usage of paint sludge at cement kilns as additional fuel.     

Elemental pollution of the golden horn surface sediments

The total and acid leachable composition of Golden Horn surface sediments have been investigated for Pb, Zn, Cu, Cr, Ni, Co, Mn and Fe. Quantitatively, the majority of the Pb, Zn and Cu defined to be from anthropogenic origin and the sediments classified as contaminated with respect to these elements. The natural change in the depth of halocline, results in the remobilization of loosely held metals from sediments. Mediterranean water is more effective in remobilization of the loosely held metals than the brackish Black Sea water.     

Spatial and temporal distribution of polychlorinated biphenyl (PCB) concentrations in soils of an industrialized city in Turkey

Surface soil (0-5 cm) samples from 43 sampling sites covering the entire urban territory of Bursa, an industrialized city in Turkey, were collected in each season and analyzed for 83 polychlorinated biphenyls (PCBs). The mean concentration of total PCBs (Σ83 PCBs) among all sites over the four seasons was 2121.51 pg/g dry weight (dw), with a range of 207.61-5461.95 pg/g dw. Total PCB concentrations in the soil samples collected near an industrial region were the highest in all seasons. In general, PCB patterns were dominated by low-chlorinated homologue groups (≤ 5 Cl groups at a 79% level). The predominant homologue group found in Bursa city soils was the penta-CBs (29.1%) followed by the tetra-CBs (25.5%) and tri-CBs (17.6%). A total of seven dioxin-like PCB congeners (CB-77, 81, 105, 114, 118, 123, and 126) were found in every sampling location and their mean total concentration for all locations and seasons was 259.27 pg/g dw, with a range of 7.02-1581.13 pg/g dw. A significant relationship (r = 0.77, p < 0.01) was found between the concentrations of dioxin-like PCBs and the seasonal average sum of PCB concentrations. A correlation between light congeners (相似文献   

Incorporation of solar-heated aeration and greenhouse in grass composting

Environmental Science and Pollution Research - Composting is an environment-friendly method for recycling organic waste, and incorporation of heat and aeration can enhance favorable conditions for...     

Immobilization of antimony waste slag by applying geopolymerization and stabilization/solidification technologies

During the processing of antimony ore by pyrometallurgical methods, a considerable amount of slag is formed. This antimony waste slag is listed by the European Union as absolutely hazardous waste with a European Waste Catalogue code of 10 08 08. Since the levels of antimony and arsenic in the leachate of the antimony waste slag are generally higher than the landfilling limits, it is necessary to treat the slag before landfilling. In this study, stabilization/solidification and geopolymerization technologies were both applied in order to limit the leaching potential of antimony and arsenic. Different combinations of pastes by using Portland cement, fly ash, clay, gypsum, and blast furnace slag were prepared as stabilization/solidification or geopolymer matrixes. Sodium silicate–sodium hydroxide solution and sodium hydroxide solution at 8 M were used as activators for geopolymer samples. Efficiencies of the combinations were evaluated in terms of leaching and unconfined compressive strength. None of the geopolymer samples prepared with the activators yielded arsenic and antimony leaching below the regulatory limit at the same time, although they yielded high unconfined compressive strength levels. On the other hand, the stabilization/solidification samples prepared by using water showed low leaching results meeting the landfilling criteria. Use of gypsum as an additive was found to be successful in immobilizing the arsenic and antimony.

ImplicationsDespite the wide use of antimony for industrial purposes, disposal options for an antimony waste such as slag from thermal processing of antimony ore were not reported in the existing literature. This study aimed to develop a disposal strategy for the hazardous antimony waste slag. The findings of this study would contribute to understand the immobilization mechanisms of antimony and arsenic and will also be of interest to the owners of the antimony ore processing plants and to researchers investigating the efficiency of stabilization/solidification and geopolymerization technologies.     

Electricity generation from landfill gas in Turkey

Landfill gas (LFG)-to-energy plants in Turkey were investigated, and the LFG-to-energy plant of a metropolitan municipal landfill was monitored for 3 years. Installed capacities and actual gas engine working hours were determined. An equation was developed to estimate the power capacity for LFG-to-energy plants for a given amount of landfilled waste. Monitoring the actual gas generation rates enabled determination of LFG generation factors for Turkish municipal waste. A significant relationship (R = 0.524, p < 0.01, two-tailed) was found between the amounts of landfilled waste and the ambient temperature, which can be attributed to food consumption and kitchen waste generation behaviors influenced by the ambient temperature. However, no significant correlation was found between the ambient temperature and the generated LFG. A temperature buffering capacity was inferred to exist within the landfill, which enables the anaerobic reactions to continue functioning even during cold seasons. The average LFG and energy generation rates were 45 m³ LFG/ton waste landfilled and 0.08 MWhr/ton waste landfilled, respectively. The mean specific LFG consumption for electricity generation was 529 ± 28 m³/MWhr.

Implications: The paper will be useful for local authorities who need to manage municipal waste by using landfills. The paper will also be useful for investors who want to evaluate the energy production potential of municipal wastes and the factors affecting the energy generation process mostly for economical purposes. Landfills can be regarded as energy sources and their potentials need to be investigated. The paper will also be useful for policymakers dealing with energy issues. The paper contains information on real practical data such as engine working hours, equation to estimate the necessary power for a given amount of landfilled waste, and son on.