Influence of preparation method on structural,optical, magnetic,and adsorption properties of nano-NiFe2O4

Nickel ferrite (NiFe₂O₄) nanoparticles are prepared through different routes (microwave, co-precipitation, and pyrolysis) and tested for water purification applications through adsorption removal of an acid red dye B as a model organic pollutant. The characterizations of the prepared samples were done using XRD, FT-IR, SEM, TEM, BET, UV-Vis absorbance, Raman spectrum, and vibrating sample magnetometer (VSM). All samples showed an inverse spinel crystal structure. The obtained results pointed out to the effect of the synthetic route on the morphology, particle size, optical, and magnetic properties of the prepared ferrites. Magnetic measurements showed super-paramagnetic behavior for all samples. The magnetic saturation (M_s) of the sample prepared by pyrolysis, was found to possess the highest saturation value, 34.8 emu/g. Adsorption experiments were performed under the change in several parameters, such as pH, adsorbent dosage, and initial dye concentration. A dye removal percentage of 99% was reached under the optimum state. The isothermal adsorption of the acid red dye was investigated using several models, in which the experimental data could be best described by the Freundlich model. Several kinetic and equilibrium models were inspected by linear regression analysis and showed best fitting for the adsorption data through pseudo-second-order model. The calculated thermodynamic parameters indicated that the adsorption of acid red dye onto all the ferrite samples is a spontaneous and endothermic physical adsorption process.

     

Development of Eco-friendly Probiotic Edible Coatings Based on Chitosan,Alginate and Carboxymethyl Cellulose for Improving the Shelf Life of UF Soft Cheese

Journal of Polymers and the Environment - The objective of the current work was to evaluate the efficiency of novel antimicrobial edible coatings based on chitosan (CH), sodium alginate (SA), and...     

Factors influencing the vertical distribution of microplastics in the beach sediments around the Ras Rakan Island,Qatar

Environmental Science and Pollution Research - Microplastic (MP) pollution is an emerging environmental problem, particularly in the marine environment, and nations are concerned about this issue....     

Local community acceptance of the rare earth industry: the case of the Lynas Advanced Materials Plant (LAMP) in Malaysia

This paper provides a detailed analysis of the local community response to a newly installed rare earth (RE) refinery facility and the factors underlying its acceptance. House-to-house interviews, using structured questionnaire, were conducted in 2013 (N = 370). Results show that the community was divided into deciding whether they agreed with the presence of the facility, 41.36 % (for) and 41.62 % (against). The remaining fraction of the community was undecided, which made up 17.03 % of the total respondents. This paper identifies six significant predictors of risk acceptance: gender, education status, place of residence, Factor 1 (variables—perception of safety, concern on effects, and trust in the operators), Factor 2 (variables—social and individual benefits), and Factor 3 (variables—no confidence in government). This study gives insights on how the public respond to potential hazardous facilities and highlights the need for policy makers to consider public sentiment which can interfere with further expansion of the RE industry.     

Non-timber forest product dependence among the <Emphasis Type="Italic">Jah Hut</Emphasis> subgroup of Peninsular Malaysia’s Orang Asli

Non-timber forest products (NTFP) represent key sources of cash and subsistence income for millions of rural and indigenous peoples living in tropical developing countries throughout the world. The current study investigates the use and significance of NTFP within a sample of Peninsular Malaysia’s Orang Asli (indigenous people). Data collected via household surveys across three sampling phases reveals that more than 75% of the population is actively engaged in NTFP collection. Household responses indicate diversity in both the types and uses of products collected. NTFP collection participation, frequency of collection, and collection reliance are found to be significantly negatively related to village proximity to the market, as well as to income level relative to the Malaysian poverty line. When collection variables are examined by different product categories, relationships with market access and income group are variable. Implications for different approaches to forest conservation and rural development are discussed.     

Evolution of biodegradation of deinking by-products used as alternative cover material

Deinking by-products (DBP) have been used as alternative cover material for landfills and mine tailings. Since DBP is biodegradable because of its high cellulose and hemicellulose content, a laboratory experimental program was performed to monitor the evolution of biodegradation and changes in the physico-chemical and geotechnical properties of DBP samples submitted to accelerated biodegradation for 1460 days at 38 degrees C. The evolution of gas and leachate production was monitored in terms of both quality and quantity, which allowed for the calculation of mass loss with time. Under the conditions of the tests (no load applied), 19.6% of the mass was lost as gas, whereas 6.1% was leached out. The results show that biodegradation did not significantly alter the compaction behavior of DBP. The void ratio and water content increased significantly, while the volume of the samples slightly decreased. This seem to indicate that the porous structure of the samples was no longer the same after 1460 d of accelerated biodegradation. A slight increase in the relative density indicates that the organic/inorganic matter ratio increased. The results of permeability tests performed with samples at various stages of biodegradation and at various confining stresses show that the saturated hydraulic conductivity of recompacted biodegraded DBP decreased from 7 x 10(-7)cm/s to approximately 2 x 10(-7)cm/s, as biodegradation advanced.     

Municipal solid waste management in Malaysia: Practices and challenges

Rapid economic development and population growth, inadequate infrastructure and expertise, and land scarcity make the management of municipal solid waste become one of Malaysia’s most critical environmental issues. The study is aimed at evaluating the generation, characteristics, and management of solid waste in Malaysia based on published information. In general, the per capita generation rate is about 0.5–0.8 kg/person/day in which domestic waste is the primary source. Currently, solid waste is managed by the Ministry of Housing and Local Government, with the participation of the private sector. A new institutional and legislation framework has been structured with the objectives to establish a holistic, integrated, and cost-effective solid waste management system, with an emphasis on environmental protection and public health. Therefore, the hierarchy of solid waste management has given the highest priority to source reduction through 3R, intermediate treatment and final disposal.     

Attitudes and Knowledge of the Harmful Effects of Waterpipe Tobacco Smoking among university students: A study from Jordan

Environmental Science and Pollution Research - Waterpipe tobacco smoking (WTS) is an emerging behavior worldwide, especially among the youth. It continues to spike in the Middle-Eastern region. WTS...     

Aspergillus awamori attenuates ochratoxin A-induced renal and cardiac injuries in rabbits by activating the Nrf2/HO-1 signaling pathway and downregulating IL1β, TNFα, and iNOS gene expressions

Environmental Science and Pollution Research - Ochratoxin A (OTA) is one of the most dangerous and that pollute agricultural products, inducing a variety of toxic effects in humans and animals. The...