Validation of a dynamic model of hydrogen permeation through Pd-based membranes

Pd-based membranes have been studied for pure hydrogen separation from syngas: in particular, a mathematical model of a Pd membrane for hydrogen separation has been developed.This model can be used in process and assessment studies of the parameters which characterize the mass transfer phenomena (such as: hydrogen permeability, surface coverage and limiting step). By coupling the permeation and water gas shift reaction kinetics, it can also be used to evaluate the performances of the membrane reactor. Further, it can be helpful to evaluate the best assembly and sizing of a H₂/CO₂ separation system.The model takes into account the kinetics of H₂ adsorption/desorption on Pd surface, the H₂ permeation into the palladium bulk and in the porous layer, and the kinetics of CO, CO₂, H₂O, O₂, H₂S competitive adsorption/desorption on Pd surface. It is also comprehensive of flux equations and bulk mass, momentum and energy balance.The results released by the model were compared to the experimental data during both the transient phase and the steady state conditions. A satisfactory agreement between model and experimental data was found.     

Use of contaminated well water, example reference biospheres 1 and 2A

The BIOMASS programme's Theme 1 evaluated a number of scenarios, which assisted in the development of practical guidance. A total of four Example Reference Biospheres were fully developed, with the assumptions, data, and models thoroughly documented. These Examples display both the practicality and the transparency available through the use of the Reference Biosphere Methodology. While the methodology is designed to promote transparency and traceability, proper documentation and justification is still the responsibility of the user. The Examples can also be used as generic analyses in some situations. Although it is anticipated that each of the Reference Biospheres explored within BIOMASS Theme 1 should be a useful practical example, the quantitative results of the model calculations are not intended to be understood as prescribed biosphere 'conversion factors'. In choosing to implement an Example, careful consideration would need to be given to their relevance (including associated data) to the particular assessment context at hand. In general, the more complex the model is, the more limited applicability it has for generic purposes. For example, ERB1A (direct use of well water for drinking) can be used straightforwardly, with minor or no adjustments, at a number of generic sites. Example 2A, however, for which climatic conditions and agricultural practices need to be specified, would need to be implemented for each specific situation.     

Influence of Suspended Clay Minerals and Humic Matter on the Solid Phase Extraction Efficiency of Selected Pesticides from Water

The purpose of this investigation was to determine the influence of humic acids (HA) and Ca-montmorillonite (CaM) on the solid-phase extraction (SPE) efficiency of atrazine, alachlor and α-cypermethrin from water samples at various pH-values. The nature and intensity of binding of the studied pesticides to CaM were determined by X-ray diffraction analysis and termogravimetric analysis (TGA) test. The studied pesticides eluted from discs were analysed by thin-layer chromatography (TLC). The effects of CaM and humic acid were generally pH-dependent and acted independently in extraction efficiency influence. Lower recovery of pesticides was observed at higher pH values when CaM was ≥0.1 g and was attributed to greater dispersion of clay, increased surface area and subsequent adsorption. Concentrations of dissolved organic carbon (DOC) in humic acid had less effect on the extraction efficiency when water was at pH 8 compared to water at pH 2, which was probably due to greater nonpolar interactions of the pesticides to the charge-neutralized humic acid molecule.     

Behavioural effects of endocrine disrupting chemicals on laboratory rodents: statistical methodologies and an application concerning developmental PCB exposure.

Appropriate behavioural tests and adequate statistical tools may help to establish the ED properties of a given compound by pointing out the alterations of selected behavioural endpoints. Frequently, laboratory collected data consist of frequencies and/or durations of specific items, and the analysis of variance (ANOVA) technique is performed to assess whether the investigated factors affect these behavioural endpoints. Moreover, when numerous aspects of behaviour are investigated simultaneously, Principal Component Analysis (PCA), a multivariate technique, may be very useful to reduce the overwhelming number of correlated original variables to a few orthogonal artificial variables (factors). Continuous Time Markov Chain (CTMC) models may be applied to analyse the time structure of a behavioural pattern when data consist of sequences of events and the time points at which they occur. Moreover, the Cox Proportional Hazard Model, a methodology originally developed for the analysis of failure time data, may help to evidence the effects of a given treatment on behavioural sequences when the assumptions of CTMC models are not fully satisfied. Analyses on data from mice of the outbred CD-1 strain (controls in a study of toxicity and exposed to PCB during development) are presented as examples to show how adequate statistical analyses and appropriate behavioural tests may reveal relevant effect of treatments otherwise not easily detected.     

Yields of field-grown soybeans exposed to simulated acidic deposition

Rainfall acidity response functions for crop yield and growth are necessary to predict the overall impacts on crop yields of ambient and/or anticipated levels of acidic rain. The experiment described herein was performed at Brookhaven National Laboratory during 1984 and 1985 to determine the effects of simulated rainfalls of pH 5.6, 4.4, 4.1 and 3.3 on seed yields of four cultivars of field-grown soybeans (Glycine max Merrill). Soybeans were chosen because previous results suggested that certain varieties of this crop are sensitive to rainfall acidity and because they are an economically important crop in the USA. Sixteen plots per treatment were used. Plants were grown using standard agronomic practices under automatically movable exclusion shelters which minimize changes in the plant's microclimate. Analysis of variance of seed yields of the four cultivars showed significant treatments for all four cultivars. For all cultivars, seed yields were lower when exposed to simulated rainfalls of pH 4.4, 4.1 and 3.3 compared with rainfalls of pH 5.6. Compared with pH 5.6 rainfall (controls), yields of Amsoy exposed to pH 4.4, 4.1 and 3.3 were lower by 13, 11 and 12%, respectively. The percentage yield reductions for Asgrow, Corsoy and Hobbit were not as great as those of Amsoy. Averaged over all cultivars tested, there was a 9% seed reduction for plants exposed to simulated rain at pH 4.1 (comparable to ambient) compared with pH 5.6.     

Weather-dependent change of cesium, strontium, barium and tellurium contamination deposited as aerosols on various cultures

Various types of plants (wheat, bean, lettuce, radish and grass) were contaminated by dry deposition of radioactive aerosols ((137)Cs, (85)Sr, (133)Ba and (123 m)Te) in order to supplement the radio-ecological data necessary for operational post-accidental codes. A few days after deposition, rainfalls were applied to these cultures to evaluate the influence of some characteristics of the rain on the contamination of the culture over time. On the other hand, for wheat and bean, the influence of the humidity condition of the foliage at the contamination time was considered. For a given plant species at a given vegetative stage, the four radionuclides were intercepted in an identical way. The interception varied from 30% for bean (young sprout) to 80% for lettuce (near maturity). The global transfer factor values were dependent on both the radionuclides and the plant species; nevertheless, a higher value was obtained for cesium, regardless of the plant and the rainfall (from 0.006 m(2)kg(fresh)(-1) for wheat-grains - contaminated at the shooting stage - or for bean-pods - contaminated at the pre-flowering stage - to 0.1m(2)kg(fresh)(-1) for a whole lettuce). The analysis of the results allowed us on the one hand, to extract parameter values of the foliar transfer directly usable in operational codes, in particular those relating to barium and tellurium, unknown until then, and on the other hand, to lay the foundations of a future, more mechanistic model, taking into account the foliar processes in a finer way.