Immediate behavioural responses to earthquakes in Christchurch,New Zealand,and Hitachi,Japan

This study examines people's immediate responses to earthquakes in Christchurch, New Zealand, and Hitachi, Japan. Data collected from 257 respondents in Christchurch and 332 respondents in Hitachi revealed notable similarities between the two cities in people's emotional reactions, risk perceptions, and immediate protective actions during the events. Respondents' physical, household, and social contexts were quite similar, but Hitachi residents reported somewhat higher levels of emotional reaction and risk perception than did Christchurch residents. Contrary to the recommendations of emergency officials, the most frequent response of residents in both cities was to freeze. Christchurch residents were more likely than Hitachi residents to drop to the ground and take cover, whereas Hitachi residents were more likely than Christchurch residents to evacuate immediately the building in which they were situated. There were relatively small correlations between immediate behavioural responses and demographic characteristics, earthquake experience, and physical, social, or household context.     

Total toxicity equivalents emissions of SF6, CHF3, and CCl2F2 decomposed in a RF plasma environment

Sulfur hexafluorine compound (SF6), trifluoromethane (CHF3) and diclorodifluoromethane (CCl2F2) are extensively used in the semiconductor industry. They are global warming gases. Most studies have addressed the effective decomposition of fluorine compounds, rather than the toxicity of decomposed by-products. Hence, the concepts of toxicity equivalents (TEQs) were applied in this work. The results indicated that HF and SiF4 were the two greatest contributors of TEQ to the SF6/H2/Ar plasma system, while F2 and SiF4 were the two greatest contributors to the SF6/O2/Ar system. Additionally, SiF4 and HF were the two greatest contributors of TEQ to both the CHF3/H2/Ar and CHF3/O2/Ar plasma systems. HF and HCl were the two greatest contributors of TEQ to the CCl2F2/H2/Ar plasma system, and Cl2 and COCl2 were the two greatest contributors to the CCl2F2/O2/Ar system. HCl and HF can be recovered using wet scrubbing, which reduces the toxicity of these emission gases. Consequently, the hydrogen-based plasma system was a better alternative for treating gases that contained SF6, CHF3 and CCl2F2 from the TEQs point of view.     

Decomposition of SF6 in an RF Plasma Environment

Abstract

Sulfur hexafluoride (SF₆)-contained gas is a common pollutant emitted during the etching process used in the semiconductor industry. This study demonstrated the application of radio-frequency (RF) plasma in the decomposition of SF₆. The decomposition fraction of SF₆ [η_SF6 (C_in–C_out)/C_in x 100%] and the mole fraction profile of the products were investigated as functions of input power and feed O₂/SF₆ ratio in an SiO₂ reactor. The species detected in both SF₆/Ar and SF₆/O₂/Ar RF plasmas were SiF₄, SO₂, F₂, SO₂F₂, SOF₂, SOF₄, S₂F₁₀, S₂OF₁₀, S₂O₂F₁₀, and SF₄. The results revealed that at 40 W, η_SF6 exceeded 99%, and the reaction products were almost all converted into stable compounds such as SiF₄, SO₂, and F₂ with or without the addition of oxygen. Sulfur oxyfluorides such as SO₂F₂, SOF₂, SOF₄, S₂OF₁₀, and S₂O₂F₁₀ were produced only below 40 W. The results of this work can be used to design a plasma/chemical system for online use in a series of a manufacturing process to treat SF₆-containing exhaust gases.     

Disinfection by-product formation and mutagenic assay caused by preozonation of groundwater containing bromide

Brominated organic and inorganic by-products are generated during ozonation of groundwater containing high bromide concentrations. This study measured concentrations of bromate, bromoform, bromoacetic acids, bromoacetonitriles, bromoacetone, 2,4-dibromophenol and aldehyde generated by ozonation. The potential mutagenicity of ozonated waters was assessed using the Ames and Microtox tests. Test results for the 18 ozonated groundwater samples demonstrate that bromate formation is associated with high pH, bromide and alkalinity content, low levels of dissolved organic carbon (DOC) and ammonia, and low alkalinity. Brominated organic by-products were correlated with high bromide ion and natural organic matter content, and low ammonia concentrations. The Ames test results demonstrate that all extracts from ozonated water have mutagenic activity; however, the 18 raw groundwater samples had no mutagenicity. The Microtox test results also show that the ozonated water samples were highly toxic. Generally, both bromide and DOC content promoted the formation of ozonation by-products and mutagenicity. Controlling of bromide and DOC concentrations is an effective method of reducing potential by-product formation and eliminating mutagenicity problems associated with groundwater ozonation.     

COMPARATIVE STUDY OF OPTIMIZATION TECHNIQUES FOR IRRIGATION PROJECT PLANNING1

ABSTRACT: This study presents three optimization techniques for on‐farm irrigation scheduling in irrigation project planning: namely the genetic algorithm, simulated annealing and iterative improvement methods. The three techniques are applied to planning a 394.6 ha irrigation project in the town of Delta, Utah, for optimizing economic profits, simulating water demand, and estimating the crop area percentages with specific water supply and planted area constraints. The comparative optimization results for the 394.6 ha irrigated project from the genetic algorithm, simulated annealing, and iterative improvement methods are as follows: (1) the seasonal maximum net benefits are $113,826, $111,494, and $105,444 per season, respectively; and (2) the seasonal water demands are 3.03*10³ m³, 3.0*10³ m³, and 2.92*10³ m³ per season, respectively. This study also determined the most suitable four parameters of the genetic algorithm method for the Delta irrigated project to be: (1) the number of generations equals 800, (2) population size equals 50, (3) probability of crossover equals 0.6, and (4) probability of mutation equals 0.02. Meanwhile, the most suitable three parameters of simulated annealing method for the Delta irrigated project are: (1) initial temperature equals 1,000, (2) number of moves equal 90, and (3) cooling rate equals 0.95.     

Management of sustainability transitions through planning in shrinking resource city contexts: an evaluation of Yubari City,Japan

This paper evaluates the planning competences required to enact a managed transition to sustainability at the municipal level for cities facing population, economic and employment decline. Drawing on the ‘shrinking cities’ literature, we argue consolidation of the built environment can become a focal point for sustaining citizen welfare when transitioning cities that are facing decline, especially those previously reliant on resource industries. We evaluate the former coal mining city of Yubari, Japan, which is developing a consolidated urban form with the aim of creating a ‘sustainable’ future city. Findings from interviews and content analysis of Yubari’s planning policy indicate, however, that to translate ‘shrinking’ a city into a managed transition, spatial planning must be accompanied by a wider range of social policy measures and strong cross-sectoral engagement. We also caution that the unique geographical and political context of Yubari mean its model may not be directly replicable in other contexts.     

RIDGE REGRESSION TECHNIQUES APPLIED TO LANDSAT INVESTIGATION OF WATER QUALITY IN LAKE OKEECHOBEE1

ABSTRACT: Landsat radiance values were processed at two different (single and double) levels of accuracy to estimate chlorophyll a, turbidity, and suspended sediment in Lake Okeechobee, Florida. Both ordinary least square and ridge regression analyses were used to establish a relationship between water quality parameters and Landsat radiance. Radiance measurements made at greater precision (double level) gave a better solution in this application. The ridge regression analysis for double level not only can reduce the total mean square error about 13–20 percent and confidence interval about 6–28 percent as compared to ordinary least square analysis, but it can also change the interpretation of analysis results.     

Characteristics of bricks made from waste steel slag

The characteristics of bricks made from steel slag were investigated in this research. Slag addition was shown to reduce the required firing temperature. When the firing temperature was greater than 1050 degrees C and the slag addition less than 10%, the bricks met ROC national standard CNS 3319 third-class brick for builders. The percentage of slag increased as the quartz and kaolin decreased in the sintered samples while the magnesium aluminum silicate and calcium silicate increased. There were no new crystal phases observed in these samples.     

WATER BUDGET COMPUTATION FOR A SHALLOW LAKE-LAKE OKEECHOBEE,FLORIDA1

ABSTRACT: The water budget computation in shallow lakes is complicated because marsh vegetation can transpire large quantities of lake water. Thus, a model including the marsh zone evapotranspiration (WET) was developed to compute the water budget for Lake Okeechobee. Three periods of testing (1969–74), planning (1963–74), and recorded period (1952–77) were used to compare the differences of the sum of storage deviation between the WET and conventional methods (WOET). Results of the WOET method showed that the sum of stage deviations were 87.42 cm (2.868 ft.), 231.80 cm (7.605 ft.), and 284.50 cm (9.333 ft.) in the testing, planning, and recorded periods, respectively. These stage deviations are equivalent in the same order to 29, 76, and 93 percent of the lake volume. In general, the WET method not only was applicable to compute the water budget for the lake but also reduced the sum of storage deviation by about 42, 31, and 49 percent, respectively, in those three periods. The storage deviation in WET method was reduced on an average to about 2 percent each year in all three periods, and the deviations were scattered more randomly than in WOET.