Fractionation of elements by particle size of ashes ejected from Copahue Volcano,Argentina

The volcano Copahue, Neuquén province, Argentina has shown infrequent explosive eruptions since the 18th century. Recently, eruptive activity and seismicity were registered in the period July-October, 2000. As a consequence, ash clouds were dispersed by winds and affected Caviahue village located at about 9 km east of the volcano. Samples of deposited particles from this area were collected during this episode for their chemical analysis to determine elements of concern with respect to the health of the local population and its environment. Different techniques were used to evaluate the distribution of elements in four particle size ranges from 36 to 300 microm. X-ray powder diffraction (XRD) was selected to detect major components namely, minerals, silicate glass, fragments of rocks and sulfurs. Major and minor elements (Al, Ca, Cl, Fe, K, Mg, Mn, Na, S, Si and Ti), were detected by energy dispersive X ray analysis (EDAX). Trace element (As, Cd, Cr, Cu, Hg, Ni, Pb, Sb, U, V and Zn) content was quantified by inductively coupled plasma-mass spectrometry (ICP-MS). Nuclear activation analysis (NAA) was employed for the determination of Ce, Co, Cs, Eu, Hf, La, Lu, Rb, Sc, Sm, Ta and Yb. An enrichment was observed in the smallest size fraction of volcanic ashes for four elements (As, Cd, Cu and Sb) of particular interest from the environmental and human health point of view.     

Antimony: a traffic-related element in the atmosphere of Buenos Aires, Argentina

Vehicular traffic is one of the main sources of antimony in highly populated urban areas like Buenos Aires where an overall traffic density of 1 500 000 vehicles per day (corresponding to 7500 vehicles km(-2)) is estimated. In this context, a study was undertaken to ascertain the levels of Sb and other traffic-related elements (TRE) in the atmosphere of this city. To this end, sixty-seven samples of PM-10 particulate matter were collected during eight days in nine representative sampling sites located downtown Buenos Aires and spread over an area of about 30 km2. The collection of particulate matter was performed on ash-free glass-fibre filters using high volume samplers with PM-10 sampling heads. A combination of aqua regia and perchloric acid was used for leaching metals from filters. The resulting solutions were evaporated and then diluted with 0.1 mol l(-1) HCl. Antimony was determined by inductively coupled plasma-quadrupole mass spectrometry (ICP-QMS) at ng g(-1) levels. Concentrations of Sb varied from 12.9 +/- 0.9 to 375 +/- 23 microg g(-1)(equivalent to 0.87 +/- 0.06 to 15.3 +/- 0.8 ng m(-3)). Statistical analysis was performed on the data set including the measured PM-10 mass and Sb concentrations for the monitored period. Correlations of Sb with other TRE namely, Cu and Mo were also assessed. The highest concentrations of Sb were detected at two sites (Hospital Alemán and Casa Rapallini) located in streets with traffic consisting mostly of passenger cars and showing a "stop-and-go" pattern in peak hours. Antimony levels in the Buenos Aires PM-10 are by far below the level of 0.5 mg m(-3)(for an 8 hour workday, 40 hour work week) set by the US Occupational Safety and Health Administration (OSHA) for occupational exposure. However, monitoring of Sb and other TRE should be carried out in a systematic fashion to detect the possibility of increases in from the present levels.     

Total and inorganic arsenic in Antarctic macroalgae

The Antarctic region offers unparalleled possibilities of investigating the natural distribution of metals and metalloids, such as arsenic. Total and inorganic As were analysed in nine species of Antarctic macroalgae collected during the 2002 summer season in the Potter Cove area at Jubany-Dallmann Station (South Shetland Islands, Argentinian Base). Total As was determined by inductively coupled plasma-optical emission spectrometry after microwave-assisted acid digestion. Inorganic As was determined by acid digestion, solvent extraction, flow injection-hydride generation-atomic absorption spectrometry. Total As ranged from 5.8 microg g(-1) dry weight (dw) (Myriogramme sp.) to 152 microg g(-1)dw (Himantothallus grandifolius). Total As concentrations were higher in Phaeophytes (mean+/-SD: 71+/-44 microg g(-1)dw) than in Rhodophytes (mean+/-SD: 15+/-11 microg g(-1)dw). Inorganic As ranged from 0.12 microg g(-1) (Myriogramme sp.) to 0.84 microg g(-1)dw (Phaeurus antarcticus). The percentage of inorganic As with respect to total As was 0.7 for Phaeophytes, but almost 4 times higher for Rhodophytes (2.6). The work discusses possible causes for the presence of As in marine organisms in that pristine environment.     

Comparison of sample digestion procedures for the determination of trace elements in antarctic krill by GF‐AAS

Two independent digestion procedures for Antarctic krill samples were compared. Dry ashing (DA) and microwave (MW) acid‐assisted digestion were tested for decomposing the samples to determine essential (Cu, Fe, Cr) and toxic elements (Cd, Pb) by graphite furnace‐atomic absorption spectrometry (GF‐AAS). A mixture of HNO₃ and H₂O₂ as digesting agent was used in the microwave procedure. For the dry ashing digestion, the organic matter was oxidated at 480°C in an open system. Both digestion methods were compared in terms of accuracy and applied to the analysis of a certified reference material: MURST‐ISS‐A2 (Antarctic krill).

The detection limits for the five elements analysed ranged from 3 to 150 ng g^‐1. Both digestion procedures are suitable for the decomposition of krill samples. However, dry ashing is not recommended to determine Pb and Cd because losses can occur.     

Monitoring trace metals in urban aerosols from Buenos Aires city. Determination by plasma-based techniques

A study was undertaken, within the framework of a 3 years national project, to assess the content of 13 elements in airborne particulate matter collected in representative zones of the metropolitan area of Buenos Aires. The sampling strategy followed consisted in collecting simultaneously 67 samples of PM10 particulate matter in 9 sampling sites covering an area of about 30 km2 during one week. The collection was performed on ash-free fibre-glass filters using high volume samplers. A combination of aqua regia and perchloric acid was used for leaching metals from filters. Key elements, namely Al, Ca, Cu, Fe, Mn, Mo, Ni, Pb, S, Sb, Sn, Zn and Zr, were determined by inductively coupled plasma-optical emission spectrometry (ICP-OES) and inductively coupled plasma-mass spectrometry (ICP-MS) at micro g g(-1) and ng g(-1) levels. Analyte concentration varied from 130 ng g(-1)(Mo) to over 30%(Ca). Multivariate statistical analysis was performed on the data set including the measured elemental compositions for the monitored period. The atmospheric concentration found for Pb confirms the decreasing levels of this element since the introduction of unleaded gasoline in 1995: 88 ng m(-3)(2001) < 220 ng m(-3)(1997) < 3900 ng m(-3)(1994). The average S concentration above 3 microg m(-3) is somehow unexpectedly high for Buenos Aires since the relatively low S content of liquid fuels and the massive usage of natural gas imply low emissions of this element from combustion activities. To the best of our knowledge, S concentrations are reported for the first time for this city.     

Fractionation of eleven elements by chemical bonding from airborne particulate matter collected in an industrial city in Argentina

A four-step chemical sequential extraction procedure was used to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in airborne particulate matter collected on glass fibre filters using a high-volume sampler. Two sets of samples were collected in 2001 (winter and summer campaigns) in representative zones of an industrial city of Argentina. The leaching scheme was applied to PM-10 particles and consisted in extracting the elements in four fractions, namely soluble and exchangeable elements; carbonates, oxides and reducible elements; bound to organic matter and sulfidic metals; and residual elements. Metals and metalloids at microg g(-1) level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). Analyte concentration varied from 14 microg g(-1) (equivalent to 1.0 ng m(-3)) for As to 11.8 mg g(-1) (equivalent to 2,089 ng m(-3)) for Al. Seven elements, namely Al, Cr, Fe, Mn, Pb, Ti and Zn showed similar distributions in both seasons while As was distributed in a significantly different manner in each season. The results exhibited low As contents in the first and second fractions that could be associated with routine coal combustion and a high content in the third and fourth fractions of the summer samples that could be linked to the use of pesticides. Aluminium, As, Cu, Mn, Ni, Ti, V and Zn were found in different percentages in the more bioavailable aqueous fraction with As, Mn, V and Zn exhibiting solubilities greater than 1% while Cr and Pb being insoluble. The content of Al, Cr, Cu, Fe, Ni, Pb, and Zn in the residual fraction was, in average, higher than 50%. A comparative assessment of the use of the underlying information available from fractionation studies compared to that obtained from total element content was done for Fe and Mn. It showed that the results obtained using chemical sequential extraction procedures allowed further discrimination of the potential air pollution sources.     

Air pollution sources of PM10 in Buenos Aires City

To elucidate the sources of PM(10) air pollution from the experimental information collected in a local air quality monitoring campaign we have applied two methods, effective variance and genetic algorithms, in the solution of the chemical mass balance. The comparison of these two mathematical approaches show that the identification of the possible sources and the evaluation of its contributions are quite independent of them. The role of possible different sources for major and trace elements and the significance of standardizing available data is also addressed. We also present a simple method for identifying the number of candidate sources, a key element defining the dimension of the search space.     

Sequential determination and chemical speciation analysis of inorganic As and Sb in airborne particulate matter collected in outdoor and indoor environments using slurry sampling and detection by HG AAS

Environmental Science and Pollution Research - In this work, fast sequential determination and chemical speciation analysis of inorganic arsenic and antimony in airborne particulate matter...