Characteristics of contaminants in water and sediment of a constructed wetland treating piggery wastewater effluent

Constructed wetland (CW) is the preferred means of controlling water quality because of its natural treatment mechanisms and function as a secondary or tertiary treatment unit. CW is increasingly applied in Korea for secondary effluent of livestock wastewater treatment. This study was conducted to recognize the characteristics of contaminants in the accumulated sediment at the bottom soil layer and to reduce the phosphorus release from sediments of the free water surface CW for the treatment of secondary piggery wastewater effluent from a livestock wastewater treatment facility. The results revealed that the dominant phosphorus existence types at near the inlet of the CW were non-apatite phosphorus (59%) and residual phosphorus (32%) suggesting that most of the particles of the influent are made up of inorganic materials and dead cells. Sediment accumulation is important when determining the long-term maintenance requirements over the lifetime of CW. Continuous monitoring will be performed for a further assessment of the CW system and design.     

Nitrogen mass balance in a constructed wetland treating piggery wastewater effluent

The nitrogen changes and the nitrogen mass balance in a free water surface flow constructed wetland （CW） using the four-year monitoring data from 2008 to 2012 were estimated. The CW was composed of six cells in series that include the first settling basin （Cell 1）, aeration pond （Cell 2）, deep marsh （Cell 3）, shallow marsh （Cell 4）, deep marsh （Cell 5） and final settling basin （Cell 6）. Analysis revealed that the NH4＋-N concentration decreased because of ammonification which was then followed by nitrification. The NO4＋-N and NO4＋-N were also further reduced by means of microbial activities and plant uptake during photosynthesis. The average nitrogen concentration at the influent was 37,819 kg/year and approximately 45% of that amount exited the CW in the effluent. The denitrification amounted to 34% of the net nitrogen input, whereas the accretion of sediment was only 7%. The biomass uptake of plants was able to retain only 1% of total nitrogen load. In order to improve the nutrient removal by plant uptake, plant coverage in four cells （i.e., Cells 1, 3, 4 and 5） could be increased.     

Microwave Process for Volatile Organic Compound Abatement

ABSTRACT

The CHA Corporation has completed the U.S. Air Force Phase II Small Business Innovation Research program to investigate the feasibility of using a novel microwave-based process for the removal and destruction of volatile organic compounds (VOCs) in effluents from noncombustion sources, such as paint booth ventilation streams. Removal of solvents by adsorption, followed by the regeneration of saturated granular activated carbon (GAC) by microwave energy, was achieved in a single fixed-bed reactor. Microwave regeneration of the fixed-bed-saturated carbon restored the original GAC adsorption capacity. After 20 adsorption/regeneration cycles, the adsorption capacity dropped from 13.5 g methyl ethyl ketone (MEK)/100 g GAC to 12.5 g MEK/100 g GAC. During microwave regeneration of the GAC fixed bed, the concentrated desorbed paint solvent was oxidized by passing the solvent mixture through a fixed bed of an oxidation catalyst mixed with silicon carbide in a microwave reactor. A 98% oxidation efficiency was consistently achieved from the oxidation of VOCs in the microwave catalytic reactor.     

A comparison of refrigerant management policies and suggestions for improvement in South Korea

HFCs (hydrofluorocarbons) emerged as alternative refrigerants after the production of chlorofluorocarbons was banned and hydrochlorofluorocarbons were phased out, under the Montreal Protocol on Substances that Deplete the Ozone Layer. However, because the Kyoto Protocol considered HFCs as greenhouse gases, and their impact on climate change has been increasing, major developed countries have been strengthening existing regulations on the use of HFCs as refrigerants. South Korea has also passed various legislations related to refrigerant management. However, reports indicate that implementation of these regulations has been ineffective, due to the absence of a specific system for managing the production, use, and disposal phases of refrigerants. To identify and resolve these issues, this study investigates the current state of refrigerant management in South Korea for those three phases. Refrigerant management policies are compared between different legislatures, using the examples of the European Union, United States, and Japan. Based on the findings, five types of measures are suggested to reduce the production and consumption of refrigerants, and to improve refrigerant management regulations in ways that are most appropriate to the South Korean context.     

Impact of injection system design on ISCO performance with permanganate--mathematical modeling results

In situ chemical oxidation (ISCO) using permanganate (MnO(4)(-)) can be a very effective technique for remediation of soil and groundwater contaminated with chlorinated solvents. However, many ISCO projects are less effective than desired because of poor delivery of the chemical reagents to the treatment zone. In this work, the numerical model RT3D was modified and applied to evaluate the effect of aquifer characteristics and injection system design on contact and treatment efficiency. MnO(4)(-) consumption was simulated assuming the natural oxidant demand (NOD) is composed of a fraction that reacts instantaneously and a fraction that slowly reacts following a 2nd order relationship where NOD consumption rate increases with increasing MnO(4)(-) concentration. MnO(4)(-) consumption by the contaminant was simulated as an instantaneous reaction. Simulation results indicate that the mass of permanganate and volume of water injected has the greatest impact on aquifer contact efficiency and contaminant treatment efficiency. Several small injection events are not expected to increase contact efficiency compared to a single large injection event, and can increase the amount of un-reacted MnO(4)(-) released down-gradient. High groundwater flow velocities can increase the fraction of aquifer contacted. Initial contaminant concentration and contaminant retardation factor have only a minor impact on volume contact efficiency. Aquifer heterogeneity can have both positive and negative impacts on remediation system performance, depending on the injection system design.     

Photocatalytic bacterial inactivation by polyoxometalates

The photocatalytic inactivation (PCI) of Escherichia coli (Gram-negative) and Bacillus subtilis (Gram-positive) was performed using polyoxometalate (POM) as a homogeneous photocatalyst and compared with that of heterogeneous TiO₂ photocatalyst. Aqueous suspensions of the microorganisms (10⁷–10⁸ cfu ml⁻¹) and POM (or TiO₂) were irradiated with black light lamps. The POM-PCI was faster than (or comparable to) TiO₂-PCI under the experimental conditions employed in this study. The relative efficiency of POM-PCI was species-dependent. Among three POMs (H₃PW₁₂O₄₀, H₃PMo₁₂O₄₀, and H₄SiW₁₂O₄₀) tested in this study, the inactivation of E. coli was fastest with H₄SiW₁₂O₄₀ while that of B. subtilis was the most efficient with H₃PW₁₂O₄₀. Although the biocidal action of TiO₂ photocatalyst has been commonly ascribed to the role of photogenerated reactive oxygen species such as hydroxyl radicals and superoxides, the cell death mechanism with POM seems to be different from TiO₂-PCI. While TiO₂ caused the cell membrane disruption, POM did not induce the cell lysis. When methanol was added to the POM solution, not only the PCI of E. coli was enhanced (contrary to the case of TiO₂-PCI) but also the dark inactivation was observed. This was ascribed to the in situ production of formaldehyde from the oxidation of methanol. The interesting biocidal property of POM photocatalyst might be utilized as a potential disinfectant technology.     

Arsenic concentration in porewater of an alkaline coal ash disposal site: Roles of siderite precipitation/dissolution and soil cover

The geochemical behavior of As in porewaters of an alkaline coal ash disposal site was investigated using multilevel samplers. The disposal site was in operation from 1983 until 1994 and was covered with 0.3–0.5 m thick soils in 2001 when this study was initiated. Sequential extraction analyses and batch leaching experiments were also performed using the coal ash samples collected from the disposal site. The results suggest the important roles of siderite (FeCO₃) precipitation/dissolution and soil cover, which have been ignored previously. Arsenic levels in the porewater were very low (average of 10 μg L⁻¹) when the site was covered with soil due to coprecipitation with siderite. The soil cover enabled the creation of anoxic conditions, which raised the Fe concentration by the reductive dissolution of Fe-(hydr)oxides. Because of the high alkalinity generated from the alkaline coal ash, even a small increase in the Fe concentration (0.66 mg L⁻¹ on average) could cause siderite precipitation. When the soil cover was removed, however, an oxidizing condition was created and triggered the precipitation of dissolved Fe as (hydr)oxides. As a result, the dissolution of previously precipitated As-rich siderite caused higher As concentration in the porewater (average of 345 μg L⁻¹).     

Characteristics of biotic and abiotic removals of dissolved organic carbon in wastewater effluents using soil batch reactors.

Biodegradable dissolved organic carbon (BDOC) analyses and abiotic adsorption of dissolved organic carbon (DOC) from different wastewater effluent were conducted to evaluate biotic and abiotic removal mechanisms as a function of the initial DOC concentration and source of DOC using soil batch reactors. To obtain high DOC concentrations, a laboratory-scale reverse osmosis unit was used. It was found that BDOC fraction was independent of the initial DOC concentration and was dependent on the source of wastewater and/or the types of wastewater treatment. The BDOC fractions varied from 9 to 73%. Trickling filter effluent (Tucson, Arizona) showed the highest BDOC, ranging from 65 to 73% biodegradable, while wastewater treated by the soil aquifer treatment (SAT) (NW-4) was found to be most refractory, with DOC removals of 9 to 14%. For nitrified/denitrified tertiary effluent (Mesa, Arizona) and secondary effluent (Scottsdale, Arizona), 36 to 42% removal of DOC was observed during the BDOC test. The amount of BDOC in the wastewater depended not on the concentration of DOC, but on the effectiveness of pretreatment. Abiotic adsorption capacity of wastewater effluent varied from 6 to 18%. Molecular weight distribution analyses showed that more than 50% of DOC in the Scottsdale concentrate had a molecular weight of less than 1000 Da, and no significant change in distribution profiles occurred after approximately 12% abiotic adsorption with both soils with acclimated microorganisms (SAT soil) and soils without acclimated microorganisms (non-SAT soils). Hence, preferential adsorption was not observed and the presence of acclimated microbes did not influence adsorption.     

Effects of temperature on oocyte growth in the Mediterranean terebellid Eupolymnia nuebulosa (Annelida: Polychaeta)

Eupolymnia nebulosa (Montagu) is a widely distributed terebellid polychaete that builds its tubes on the coastal shelf in areas with mixed soft and hard bottoms. From a long-term survey in the Bay of Banyuls, France (NW Mediterranean), we found an advancement of the timing of the spawning period coincident with a delayed breakdown of the thermocline. We postulate that persistent high temperatures can influence gamete development by stimulating oocyte growth, resulting in earlier spawning. During 1992 and 1993, we used a between-individuals experimental approach to assess the possible effect of temperature on oocyte growth based on: (1) determination of the growing fraction of the oocyte population (i.e. oocyte net growth); (2) identification of differences in oocyte growth-rate among females; (3) comparison of non-significantly different size-distributions of the growing oocyte fraction (net oocyte size-distributions) at the beginning of the experiments with those at the end. No effect of temperature on oocyte growth was detectable at the population level, but a positive individual response to prolonged high temperature was evident. Thus, the lack of a significant response by the population to prolonged high temperature does not imply a lack of individual response. We propose a model of oocyte-growth dynamics based on temperature that incorporates previous observations of extended oogenesis and oocyte growth during periods of both increasing and decreasing temperature and on the scattered pattern of oocyte size-distributions at the onset of spawning. Received: 4 November 1996 / Accepted: 18 January 1997     

Microwave process for volatile organic compound abatement

The CHA Corporation has completed the U.S. Air Force Phase II Small Business Innovation Research program to investigate the feasibility of using a novel microwave-based process for the removal and destruction of volatile organic compounds (VOCs) in effluents from noncombustion sources, such as paint booth ventilation streams. Removal of solvents by adsorption, followed by the regeneration of saturated granular activated carbon (GAC) by microwave energy, was achieved in a single fixed-bed reactor. Microwave regeneration of the fixed-bed-saturated carbon restored the original GAC adsorption capacity. After 20 adsorption/regeneration cycles, the adsorption capacity dropped from 13.5 g methyl ethyl ketone (MEK)/100 g GAC to 12.5 g MEK/100 g GAC. During microwave regeneration of the GAC fixed bed, the concentrated desorbed paint solvent was oxidized by passing the solvent mixture through a fixed bed of an oxidation catalyst mixed with silicon carbide in a microwave reactor. A 98% oxidation efficiency was consistently achieved from the oxidation of VOCs in the microwave catalytic reactor.