Enhancing bioremediation of diesel oil and gasoline in soil amended with an agroindustry sludge

This paper presents a study of the bioremediation of diesel oil and gasoline by a series of controlled laboratory tests. Sludge from an agroindustry was used to enhance bioremediation of both gasoline and diesel oil mixed with a soil mass to compare its efficiency with that of a mineral fertilizer. Effects of soil microbiology and soil mixtures were investigated by means of evolution of CO2, microorganism populations at 90 days, pH at 65 and 95 days, mineral nitrogen, and gas chromatographic analysis of the benzene, toluene, methyl tertiary butyl ether, C8, and C9+total aromatics at the end of the experiments. Treatments containing sludge showed better soil conditions after 170 days of treatment (inorganic nitrogen and microbiota activity) compared with gasoline and diesel oil without amendments. Samples had no detectable traces of the measured hydrocarbons at 170 days of treatment.     

Cancer cluster among police detachment personnel

An apparent cancer cluster at a police detachment in a coastal British Columbia community was investigated. Police personnel suspected that the detachment building may have been a factor. Police personnel (20 current and 154 previous employees) associated with the detachment since 1963, the date of occupancy, were traced. After all 174 cases were contacted directly, or next of kin in case of death, a total of 16 cases of cancer or suspected cancers were reported. Of these 16, eight cases of cancer were confirmed through a cancer registry. Cancers included testicular, cervical, colon, skin (including melanoma), leukemias and lymphomas with an age range of diagnosis between 22 and 44 years. There was no evidence for an underlying event, factor or condition in the police building that could be attributed to the observed cancer cases. A possible association between these cancers and the use of police traffic radar is discussed.     

Cardanol Polymerization Under Acid Conditions By Addition And Condensation Reactions

Cashew nut shell liquid (CNSL) is a byproduct of the cashew nut industry and consists predominantly of phenolic compounds that have an side chain with different degrees of unsaturation. Cardanol, one of these components, is biodegradable and widely available. Studies have revealed several polymerization reactions involving cardanol. However, the mechanisms and detailed structures of polymerization reactions have not been explored, although the final product shows different applications. In this work, we evaluated the mechanism and the products structure of the reaction of cardanol with: (i) boron trifluoride diethyl etherate (BF₃O(CH₂CH₃)₂), and (ii) formaldehyde. The characterizations were performed by FTIR, ¹H NMR, SEC and TGA. The results show that the reaction of cardanol with aldehyde produces the expected like-comb structure with a long hydrocarbon pendent chain. Nevertheless, the reaction of cardanol with BF₃O(CH₂CH₃)₂ can exhibits a more complex structure since it was identified aromatic ring linkages, besides the expected polymerization through C=C.     

A conjugate of acyclovir monophosphate with lactosaminated albumin releases the phosphorylated drug in liver cells

This work was supported by the Consiglio Nazionale delle Ricerche (Progetto finalizzato Oncologia No. 87.01285.44) and by the Associazione Italiana per la Ricerca sul Cancro (AIRC).     

LCA of environmental and socio-economic impacts related to wood energy production in alpine conditions: Valle di Fiemme (Italy)

An extended Life Cycle Assessment (LCA) is performed for evaluating the impacts of a woody biomass supply chain for heating plants in the alpine region. Three main aspects of sustainability are assessed: greenhouse gas emissions, represented by global warming potential (GWP) impact category, costs and direct employment potential. We investigate a whole tree system (innovative logging system) where the harvest of logging residues is integrated into the harvest of conventional wood products. The case study is performed in Valle di Fiemme in Trentino region (North Italy) and includes theoretical and practical elements. The system boundary is the alpine forest fuel system, from logging operations at the forest stand to combustion of woody biofuels at the heating plant. The functional unit is 1 m³ solid over bark of woody biomass, delivered to the district heating plant in Cavalese (Trento). The relative sustainability of traditional and innovative systems is compared and energy use is estimated. Results show that the overall GWP and costs are about 13 kg CO_2equivalent and 42 euro per functional unit respectively for the innovative system. Along the product supply chain, chipping contributes the greatest share of GWP and energy use, while extraction by yarder has the highest financial costs. The GWP is reduced by 2.3 ton CO_2equivalent when bioenergy substitutes fuel oil and 1.7 ton CO_2equivalent when it substitutes natural gas. The sensitivity analysis illustrates that variations in fuel consumption and hourly rates of costs have a great influence on chipping operation and extraction by cable yarder concerning GWP and financial analysis, respectively. This is confirmed by sensitivity analysis. Better technologies, the use of biofuels along the product supply chain and more efficient systems might reduce these impacts. Replacing the traditional system with the innovative one reduces emissions and costs. A low energy input ratio is required for harvesting logging residues. The direct employment potential is a conflicting aspect and needs further investigations.     

Discharge of pharmaceutical products (PPs) through a conventional biological sewage treatment plant: MECs vs PECs?

Pharmaceuticals for human use are consumed in significant quantities and their occurrence in aquatic systems has been reported by a number of authors. In the context of environmental risk assessment, there is an increasing interest in evaluating the discharge of pharmaceutical products to surface waters through sewage treatment plants (STP). This case study was carried out on a conventional biological treatment plant (Alès, France) and focused on a set of eleven drugs representing the main therapeutic classes. Measured environmental concentrations (MECs) range from the low ng L^? 1 to 1.5 µg L^? 1 in effluent and up to few hundred ng L^? 1 in receiving surface waters. There is a good agreement between MEC and predicted environmental concentration (PEC) values for seven of the eleven investigated drugs in STP effluent. There is not such a good match between PEC and MEC values in surface waters, and this highlights the limits of this approach, at the local scale.     

Evaluating the efficacy of restoration plantings through DNA barcoding of frugivorous bird diets

Frugivores are critical components of restoration programs because they are seed dispersers. Thus, knowledge about bird–plant trophic relationships is essential in the evaluation of the efficacy of restoration processes. Traditionally, the diet of frugivores is characterized by microscopically identifying plant residues in droppings, which is time‐consuming, requires botanical knowledge, and cannot be used for fragments lacking detectable morphological characteristics (e.g., fragmented seeds and skins). We examined whether DNA barcoding can be used as a universal tool to rapidly characterize the diet of a frugivorous bird, Eurasian blackcap (Sylvia atricapilla). We used the DNA barcoding results to assess restoration efforts and monitor the diversity of potentially dispersed plants in a protected area in northern Italy. We collected 642 Eurasian Blackcap droppings at the restored site during the autumn migration over 3 years. Intact seeds and fragmented plant material were analyzed at 2 plastidial barcode loci (rbcL and trnH‐psbA), and the resulting plant identifications were validated by comparison with a reference molecular data set of local flora. At least 17 plant species, including 7 of the 11 newly transplanted taxa, were found. Our results demonstrate the potential for DNA barcoding to be used to monitor the effectiveness of restoration plantings and to obtain information about fruit consumption and dispersal of invasive or unexpected plant species. Such an approach provides valuable information that could be used to study local plant biodiversity and to survey its evolution over time.