Evaluation of solubility of polycyclic aromatic hydrocarbons in ethyl lactate/water versus ethanol/water mixtures for contaminated soil remediation applications

Solubility data of recalcitrant contaminants in cosolvents is essential to determine their potential applications in enhanced soil remediation. The solubilities of phenanthrene, anthracene, fluoranthene and benzo[a]pyrene in ethyl lactate/water and ethanol/water mixtures were measured using equilibrium techniques. The cosolvency powers derived from solubility data were then applied to the model developed from the solvophobic approach to predict the capability of ethyl lactate and ethanol in enhancing the desorption of contaminants from soils. Both ethyl lactate and ethanol cosolvents were shown to be able to enhance the solubilisation of the tested four polycyclic aromatic hydrocarbons by > 4 orders of magnitude above the levels obtained with water alone. However, ethyl lactate demonstrated a greater capacity to enhance PAH solubility than ethanol. The cosolvency powers of ethyl lactate/water system obtained from the end-to-end slope (σ) and the end-to-half slope (σ_0.5) of the solubilisation curve were 1.0--1.5 and 2.0--2.9 higher than ethanol/water system respectively. In line with this, ethyl lactate/water was demonstrated to enhance the desorption of contaminants from soil by 20%--37% and 18%--61% higher compared to ethanol/water system in low organic content and high organic content soils respectively, with a 2:1 (V/W) ratio of solution:soil and with cosolvent fraction as low as 0.4. With the exception of benzo[a]pyrene, the experimental desorption results agreed fairly with the predicted values, under an applied solution:soil ratio that was enough to hold the capacity of released contaminants.     

Anaerobic biodegradation of biphenyl in various paddy soils and river sediment

The anaerobic degradation of biphenyl was investigated in four uncontaminated Japanese paddy soils and one river sediment sample contaminated with benzene and chlorinated aliphatics. Two of the paddy soils and the sediment were capable of degrading biphenyl anaerobically without any additional medium or electron acceptors. The half-lives of biphenyl biodegradation in the three samples were 212 d in the Kuridashi soil, 327 d in the Kamajima soil, and 429 d in the river sediment. The Kuridashi soil metabolized 1+/-0.3% of [U-14C]-biphenyl into CO2 and 5+/-2% into water-soluble metabolites after 45 d of incubation. Submerged conditions, which result in lower nitrate and iron oxide contents, and neutral pH, appeared to be the common properties among the samples that influenced their degradation capacities. The addition of 10mM sulfate and 20mM Fe(III) as electron acceptors did not enhance the biphenyl degradation rate, whereas 10mM nitrate completely inhibited biphenyl degradation. The addition of different electron donors (lactate, acetate, or pyruvate) slightly slowed the degradation. Molybdate (an inhibitor of sulfate-reducing bacteria) had an inhibitory effect on biphenyl biodegradation, but bromoethanesulfonic acid (an inhibitor of methanogens) did not. Most biphenyl degradation was observed when only water was added, with no other electron acceptors or donors. These results suggest that sulfate-reducing bacteria and fermentative microbial populations play important roles in anaerobic biphenyl biodegradation in paddy soil.     

黄骅港三期筒仓防煤体高温对策研究

黄骅港三期是单个容量3万吨共24座筒仓的超大型群仓储煤系统,储煤主要来自神华集团所属煤矿,少部分为外购协作煤,多属易自燃煤种。为更有效控制火灾隐患,通过工艺流程分析及危险因素提取,试运营期间数据分析等,研究了致使煤体高温的危险因素和对策。发现运输过程中出现因雨淋而产生润湿热,因粉尘积聚发热的危险;筒仓储煤曾出现数天内温度从10℃升高到45℃,筒仓内有毒有害气体可能超限的危险;输煤皮带可能跑偏引起摩擦生热的危险等。试运营期间针对性采取了喷洒抑尘剂,设置警报系统及检测装置,加强皮带机监控和管理等安全措施。     

Evaluation of in situ catalysed hydrogen peroxide propagation (CHP) for phenanthrene and fluoranthene removals from soil and its associated impacts on soil functionality

Extensive contamination of soils by highly recalcitrant contaminants such as polycyclic aromatic hydrocarbons (PAHs) is an environmental problem arising from rapid industrialisation. This work focusses on the remediation of soil contaminated with 3- and 4-aromatic ring PAHs (phenanthrene (PHE) and fluoranthene (FLUT)) through catalysed hydrogen peroxide propagation (CHP). In the present work, the operating parameters of the CHP treatment in packed soil column was optimised with central composite design (H₂O₂/soil 0.081, Fe³⁺/soil 0.024, sodium pyrophosphate (SP)/soil 0.024, pH of SP solution 7.73). The effect of contaminant aging on PAH removals was also investigated. Remarkable oxidative PAH removals were observed for the short aging and extended aging period (up to 86.73 and 70.61 % for PHE and FLUT, respectively). The impacts of CHP on soil biological, chemical and physical properties were studied for both spiked and aged soils. Overall, the soil functionality analyses after the proposed operating condition demonstrated that the values for soil respiration, electrical conductivity, pH and iron precipitation fell within acceptable limits, indicating the compatibility of the CHP process with land restoration.     

Environmental application of three-dimensional graphene materials as adsorbents for dyes and heavy metals: Review on ice-templating method and adsorption mechanisms

The remediation of wastewater requires treatment technologies which are robust, efficient, simple to operate and affordable such as adsorption. Lately, three-dimensional (3D) graphene based materials have attracted significant attention as effective adsorbents for wastewater treatment. The intrinsic properties of 3D graphene structure such as large surface area and interconnected porous structure can facilitate the transport of pollutants into the 3D network and provide abundant active sites for trapping the pollutants. For the synthesis of 3D graphene structure, ice-templating is commonly practiced due to its facile steps, cost effectiveness and high scalability potential. This review covers the ice-templating fabrication technique for 3D graphene based materials and their application as adsorbents in eliminating dyes and heavy metals from aqueous media. The assembly mechanisms of the ice-templating fsynthesis are comprehensively discussed. Further discussion on the fundamental principles, critical process parameters and characteristics of ice-templated 3D graphene structures is also included. A thorough review on the mechanisms for batch adsorption of dyes and heavy metals is presented based on the structures and properties of the 3D graphene materials. The review further evaluates the dynamic adsorption in packed columns and the regeneration of 3D graphene based materials.     

Utilisation of environmentally friendly okara-based biosorbent for cadmium(II) removal

Environmental Science and Pollution Research - Heavy metals released by various industries are among the major pollutants found in water resources. In this research, biosorption technique was...     

Fenton based remediation of polycyclic aromatic hydrocarbons-contaminated soils

This paper aims to review the applications of Fenton based treatments specifically for polycyclic aromatic hydrocarbons-contaminated soils. An overview of the background and principles of Fenton treatment catalysed by both homogenous (conventional and modified Fenton) and heterogeneous (Fenton-like) catalysts is firstly presented. Laboratory and field soil remediation studies are then discussed in terms of efficiency, kinetics and associated factors. Four main scopes of integrated Fenton treatments, i.e. physical-Fenton, biological-Fenton, electro-Fenton and photo-Fenton are also reviewed in this paper. For each of these integrated remediation technologies, the theoretical background and mechanisms are detailed alongside with achievable removal efficiencies for polycyclic aromatic hydrocarbons in contaminated soils compared to sole Fenton treatment. Finally, the environmental impacts of Fenton based soil treatments are documented and discussed.     

Synthesis of a highly recoverable 3D MnO2/rGO hybrid aerogel for efficient adsorptive separation of pharmaceutical residue

Water contamination by non-steroidal anti-inflammatory drugs, such as acetaminophen, is an emerging ecological concern. In this study, a new three-dimensional manganese dioxide-engrafted reduced graphene oxide (3D MnO₂/rGO) hybrid aerogel was developed for acetaminophen sequestration. The synthesis involved firstly the self-assembly of GO aerogel, followed by thermal reduction and in-situ MnO₂ growth by redox-reaction. The aerogel demonstrated interlinked planes with smooth surfaces deposited with MnO₂ nanospheres and pores of 138.4 – 235.3 µm width. The influences of adsorbent dosage, initial pH, acetaminophen concentration, temperature and contact time were investigated. It was determined that the adsorption of acetaminophen occurred on uniform sorption sites in the aerogel, as suggested by the best fit of data to the Langmuir isotherm, yielding a maximum adsorption capacity of 252.87 mg/g. This highest adsorption performance of the 3D MnO₂/rGO aerogel was attained at a dosage of 0.6 g/L, initial pH of 6.2 and temperature of 40°C. The process kinetics were in-line with the pseudo-first-order and pseudo-second-order kinetics at 10 and 20 – 500 mg/L concentrations, respectively. Thermodynamic assay showed the spontaneity and endothermicity features of the 3D MnO₂/rGO-acetaminophen system. The acetaminophen adsorption mechanisms were mainly hydrogen bonding and pore entrapment. Moreover, the as-synthesised aerogel was effectively regenerated using acetone and re-utilised in four adsorption-desorption cycles. Overall, the results highly recommend the implementation of the 3D MnO₂/rGO hybrid aerogel for purification of wastewater polluted by acetaminophen residue.