Comparison of light- and SST-based geolocation with satellite telemetry in free-ranging albatrosses

Light-based archival tags are increasingly being used on free-ranging marine vertebrates to study their movements using geolocation estimates. These methods use algorithms that incorporate threshold light techniques to determine longitude and latitude. More recently, researchers have begun using sea surface temperature (SST) to determine latitude in temperate regions. The accuracy and application of these algorithms have not been validated on free-ranging birds. Errors in both geolocation methods were quantified by double-tagging Laysan (Phoebastria immutabilis Rothschild) and black-footed (P. nigripes Audubon) albatrosses with both leg-mounted archival tags that measured SST and ambient light, and satellite transmitters. Laysan albatrosses were captured and released from breeding colonies on Tern Island, northwestern Hawaiian Islands (23°52N, 166°17W) and Guadalupe Island, Mexico (28°31N, 118°10W) and black-footed albatrosses from Tern Island. Studies were carried out between December 2002 and March 2003. For all birds combined, the mean ± SD great circle (GC) distance between light-based locations and satellite-derived locations was 400±298 km (n=131). Errors in geolocation positions were reduced to 202±171 km (n=154) when light-based longitude and SST-based latitude (i.e. SST/light) were used to establish locations. The SST/light method produced comparable results for two Laysan albatross populations that traveled within distinctly different oceanic regions (open ocean vs more coastal) whereas light-based methods produced greater errors in the coastal population. Archival tags deployed on black-footed albatrosses returned a significantly higher proportion of lower-quality locations, which was attributed to interference of the light sensor on the tag. Overall, the results demonstrate that combining measures of light-based longitude and SST-based latitude significantly reduces the error in location estimates for albatrosses and can provide valid latitude estimates during the equinoxes, when light-based latitude measurements are indeterminate.Communicated by J.P. Grassle, New Brunswick     

Annual migrations,diving behavior,and thermal biology of Atlantic bluefin tuna, <Emphasis Type="Italic">Thunnus thynnus</Emphasis>, on their Gulf of Mexico breeding grounds

Electronic tags were used to examine the biology of Atlantic bluefin tuna (Thunnus thynnus L.) on their breeding grounds in the Gulf of Mexico (GOM). The hypothesis that movement patterns, diving behavior, and thermal biology change during different stages of the breeding migration was tested. Mature Atlantic bluefin tuna tagged in the western Atlantic and the GOM, were on their breeding grounds from February to June for an average of 39 ± 11 days. The bluefin tuna experienced significantly warmer mean sea surface temperatures (SSTs) within the GOM (26.4 ± 1.6°C) than outside the GOM (20.2 ± 1.9°C). As the bluefin tuna entered and exited the GOM, the fish dove to daily maximum depths of 568 ± 50 and 580 ± 144 m, respectively, and exhibited directed movement paths to and from the localized breeding areas. During the putative breeding phase, the bluefin tuna had significantly shallower daily maximum depths (203 ± 76 m), and exhibited shallow oscillatory dives during the night. The movement paths of the bluefin tuna during the breeding phase were significantly more residential and sinuous. The heat transfer coefficients (K) were calculated for a bluefin tuna in the GOM using the recorded ambient and body temperatures. The K for this fish increased rapidly at the high ambient temperatures encountered in the GOM, and was significantly higher at night in the breeding phase when the fish was exhibiting shallow oscillatory dives. This suggests that the fish were behaviorally and physiologically thermoregulating in the Gulf of Mexico. This study demonstrates that the movement patterns, diving behavior, and thermal biology of Atlantic bluefin tuna change significantly at different stages of the breeding migration and can be used to define spawning location and timing. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Preliminary report on the digestive enzymes present in the digestive gland ofPerna viridis

Quantitative data on digestive enzymes of bivalves are very limited and so this study was performed to obtain such information, and to find out whether some of these enzymes are well adapted to conditions in the digestive gland. The green musselPerna viridis was obtained from Clementi West Market in 1985. The results show that various carbohydrases are present in the digestive gland. The activities of-amylase, cellulase and-glucosidase are higher than that of other carbohydrases, whilst the activities of both lipase and protease, especially the former, are low. The pH optima of the following enzymes are also given:-amylase = 5.8; laminarinase = 5.5;-glucosidase = 5.8; trehalase = 4.8;-glucosidase = 5.5. The only enzyme which was not well adapted to conditions in the digestive gland (pH 6.2) was trehalase. The wide spectrum of enzymes present in this bivalve indicates that it has the ability to utilize a wide range of nutrients efficiently.     

Metal ferrites nanoparticles for catalytic and photocatalytic ozonation in wastewater treatment: a review

Environmental Chemistry Letters - The discharge of various pollutant-rich wastewater in large volumes without adequate treatment seriously endangers the environment. Catalytic and photocatalytic...     

Specificity of communication channels in four limacodid moths: Darna bradleyi, Darna trima, Setothosea asigna, and Setora nitens (Lepidoptera: Limacodidae)

Summary. Darna bradleyi Holloway, D. trima Moore, Setothosea asigna van Eecke and Setora nitens Walker are sympatric and coseasonal limacodid moths in plantations of oil palm, Elaeis guineensis Jacq. (Arecales: Palmae), in Borneo, southeast Asia. We tested the hypothesis that these four species maintain reproductive isolation through specificity in diel periods of communication, microlocation for communication and/or communication signal (pheromone). Studying diel periodicity of calling behavior by female moths and response by male moths to traps baited with virgin females or synthetic pheromone, we determined that sexual communication of D. bradleyi and D. trima took place from ˜17:30 to 18:45 hr and that of S. asigna and S. nitens from ˜18:45 to 20:00 hr and from ˜18:30 to 19:30 hr, respectively. Over 80% of male S. asigna and S. nitens were captured in pheromone-baited traps suspended >5 m high, whereas male D. bradleyi and D. trima were captured mostly in traps <5 m high. Synthetic pheromone baits attracted male moths in a species-specific manner. Moreover, baits containing both S. asigna and S. nitens pheromones failed to attract any male moths, indicating that female S. asigna and S. nitens, with overlapping communication periods, use bifunctional pheromone components that attract conspecific males while repelling heterospecifics. Similarly, addition of D. bradleyi pheromone to S. asigna or S. nitens pheromone reduced attraction of male S. asigna and S. nitens. The failure of D. bradleyi and D. trima, which overlap in time and microlocation for communication, to evolve bifunctional pheromones may be attributed to the recent occurrence of sympatry between D. bradleyi and D. trima in Borneo, apparently too recent for bifunctional pheromones to have evolved. We conclude that D. bradleyi, D. trima, S. asigna and S. nitens utilize any or all of diel periodicity, intra and interspecific effects of communication signal and/or microlocation for signaling, allowing these limacodids to co-inhabit the same habitat and remain reproductively isolated. Received 5 May 2000; accepted 18 August 2000     

Oceanographic preferences of Atlantic bluefin tuna, <Emphasis Type="Italic">Thunnus thynnus</Emphasis>, on their Gulf of Mexico breeding grounds

Electronic tagging and remotely sensed oceanographic data were used to determine the oceanographic habitat use and preferences of Atlantic bluefin tuna (Thunnus thynnus L.) exhibiting behaviors associated with breeding in the Gulf of Mexico (GOM). Oceanographic habitats used by 28 Atlantic bluefin tuna exhibiting breeding behavior (259 days) were compared with available habitats in the GOM, using Monte Carlo tests and discrete choice models. Habitat utilization and preference patterns for ten environmental parameters were quantified: bathymetry, bathymetric gradient, SST, SST gradient, surface chlorophyll concentration, surface chlorophyll gradient, sea surface height anomaly, eddy kinetic energy, surface wind speed, and surface current speed. Atlantic bluefin tuna exhibited breeding behavior in the western GOM and the frontal zone of the Loop Current. Breeding areas used by the bluefin tuna were significantly associated with bathymetry, SST, eddy kinetic energy, surface chlorophyll concentration, and surface wind speed, with SST being the most important parameter. The bluefin tuna exhibited significant preference for areas with continental slope waters (2,800–3,400 m), moderate SSTs (24–25 and 26–27°C), moderate eddy kinetic energy (251–355 cm² s⁻²), low surface chlorophyll concentrations (0.10–0.16 mg m⁻³), and moderate wind speeds (6–7 and 9–9.5 m s⁻¹). A resource selection function of the bluefin tuna in the GOM was estimated using a discrete choice model and was found to be highly sensitive to SST. These habitat utilization and preference patterns exhibited by breeding bluefin tuna can be used to develop habitat models and estimate the probable breeding areas of bluefin tuna in a dynamic environment.     

Food additives for the synthesis of metal nanoparticles: a review

Environmental Chemistry Letters - Metal nanoparticles have found applications in many fields such as molecular diagnostics, electronic devices and environmental remediation. Nonetheless,...     

Human maternal and umbilical cord blood concentrations of polybrominated diphenyl ethers

Polybrominated diphenyl ethers (PBDEs), widely used as flame retardants in commercial products, have become ubiquitous environmental contaminants. Although adult human exposure to PBDEs is well documented, developmental exposure is less well characterized. The objectives of this study were to measure maternal and fetal exposure to nine PBDE congeners and to investigate potential associations with birth weight. PBDE congeners were quantified in maternal serum at 24-28 weeks of pregnancy, delivery, and umbilical cord serum (UCS) by gas chromatography-mass spectrometry (GC/MS/MS). Complete blood sample sets were obtained from 97 pregnant women (mean age 33.1 ± 0.5 years). PBDE-28, -47 and -99 were quantified in all samples tested and PBDE-47 was the most abundant congener measured in both maternal (mid-pregnancy and delivery samples geometric mean = 26.9 and 26.9, respectively) and UCS (GM = 56.0 ng g⁻¹ lipid). The UCS concentration for all congeners with the exception of PBDE-153 was higher vs. maternal delivery samples (p < 0.001). Only the UCS concentration of PBDE-17 and -99 were significantly associated (β = −49.860, p = 0.032, and β = −3.645, p = 0.05) with birth weight. However, after adjustment for potential confounders only the association between PBDE-99 and birth weight remained significant (β = −3.951 and p = 0.016). We conclude that: the fetus is exposed to PBDEs from at least the second trimester of pregnancy onward; PBDE congeners are higher in UCS compared to maternal serum samples collected at delivery; and that developmental PBDE exposure is potentially associated with lower birth weight.     

Recycling of Malaysia’s electric arc furnace (EAF) slag waste into heavy-duty green ceramic tile

Recently, various solid wastes from industry such as glass waste, fly ash, sewage sludge and slag have been recycled into various value-added products such as ceramic tile. The conventional solutions of dumping the wastes in landfills or incineration, including in Malaysia are getting obsolete as the annual huge amount of the solid wastes would boost-up disposal cost and may cause permanent damage to the flora and fauna. This recent waste recycling approach is much better and greener as it can resolve problems associated with over-limit storage of industrial wastes and reduce exploration of natural resources for ceramic tile to continuously sustain the nature. Therefore, in this project, an attempt was made to recycle electric arc furnace (EAF) slag waste, obtained from Malaysia’s steel making industry, into ceramic tile via conventional powder compaction method. The research work was divided into two stages. The first stage was to evaluate the suitability of EAF slag in ceramic tile by varying weight percentage of EAF slag (40 wt.%, 50 wt.% and 60 wt.%) and ball clay (40 wt.%, 50 wt.% and 60 wt.%), with no addition of silica and potash feldspar. In the second stage, the weight percentage of EAF slag was fixed at 40 wt.% and the percentage of ball clay (30 wt.% and 40 wt.%), feldspar (10 wt.% and 20 wt.%) and silica (10 wt.% and 20 wt.%) added was varied accordingly. Results obtained show that as weight percentage of EAF slag increased up to 60 wt.%, the percentage of apparent porosity and water absorption also rose, with a reduction in tile flexural strength and increased porosity. On the other hand, limiting the weight percentage of EAF slag to 40 wt.% while increasing the weight percentage of ball clay led to a higher total percentage of anorthite and wollastonite minerals, resulting in higher flexural strength. It was found that introduction of silica and feldspar further improved the flexural strength due to optimization of densification process. The highest flexural strength, lowest apparent porosity and water absorption of EAF slag based tile was attained at the composition of 40 wt.% EAF slag – 30 wt.% ball clay – 10 wt.% feldspar – 20 wt.% silica. The properties of ceramic tile made with EAF slag waste (up to 40 wt.%), especially flexural strength are comparable to those of commercial ceramic tile and are, therefore, suitable as high flexural strength and heavy-duty green ceramic floor tile. Continuous development is currently underway to improve the properties of tile so that this recycling approach could be one of the potential effective, efficient and sustainable solutions in sustaining our nature.