Using consequence analysis on some chlorine operation hazards and their possible effects on neighborhoods in central Taiwan

The applications of chlorine have been broadly used in many industrial products, such as bleaching agents, synthetic rubbers, plastics, disinfectants, iron chlorides, fire refractory materials, insecticides, and anti-freezers, etc. According to the Taiwan Environmental Protection Administration (TEPA), more than 30 thousand tons were used in the year 2000. In addition, there were more than 12 reported incidents from 2000 to 2003—mostly on using chlorine as disinfectants (five) and as process agents (four).

This study investigated 15 chlorine operation plants in central Taiwan. These chlorine usages included bleaching agents, disinfectants, iron chloride, synthesizing rubber plastics, and others. Thirteen plants were located in the industrial parks and two were in or near residential zones. The consequence analysis were used three different methods to analyze the worst-case scenarios (WCSs) and alternative release case scenarios (ACSs) in order to compare impact zones for applying various active and passive mitigation systems, such as confined space, scrubber, water-spray, and so no. For two plants in or near residential zones, multi-layers mitigation systems and operation limits should be implemented in order to enforce more stringent protection measures. However, there was no specific regulation for chlorine plants operated at different locations, such as industrial parks or residential zones. In order to reduce chemical accidents and their impacts on public safety, our results suggest that source mitigation/management and warning systems should be adopted simultaneously.     

Pah characteristics in ambient air within a steel industrial complex

Ambient air samples at ten sites in an iron and steel industrial complex were collected from June to December for analyzing polycyclic aromatic hydrocarbons (PAHs). Sixteen species of PAH components in air samples were identified. The results indicate that both gaseous phase and particle‐bound PAHs at the top of the cokemaking plants are unusually high. The profiles of particle‐bound PAHs indicate that the predominant species at the top of, the coke oven batteries are those of high molecular weight components. The major components of particle‐bound PAHs at sampling sites near the fenceline, however, include the medium molecular weight components. The PAH profiles of air samples within the industrial complex show a strong similarity to those of cokemaking plant samples. The concentrations and the specific content of benzo(a)pyrene in the iron and steel industrial complex are higher than those values measured in urban area, petrochemical industry park, and open‐air burning area.     

Joint Impact of Scaling and Hysteresis on NAPL Flow Simulation

The hysteresis of capillary pressure versus saturation (P–S) relation is an important constitutive relation in multiphase flow, since the P–S relation is widely used to predict P–S relations in the simulation of the non-aqueous phase liquids (NAPLs). This work examined the performance of the scaling rule on predicting the P–S relationship and then studied the joint impact of the scaling and hysteresis on the multiphase NAPL flow simulation. Various experimental P–S values of distinct fluid pairs were compared with the scaled P–S curves using the scaling rule. The comparison indicated that the prediction of P–S is more accurate when the water–air P–S curve is used to scale other P–S curves. The joint impact of the scaling and hysteresis on the NAPLs flow simulation was then investigated by numerical simulation studies. The NAPL simulator was used to simulate the outcome of several scenarios based on a system with water–NAPL–air in a hypothetical sand tank. For both gasoline and trichloroethylene, the difference of the injected NAPL volume between no hysteretic and hysteretic simulations over a given time period was the smallest when the water–air P–S curve was used to scale other P–S curves. Simulation results of this study are valuable references for predicting the distribution of NAPLs.     

A study of ground-level ozone pollution, ozone precursors and subtropical meteorological conditions in central Taiwan

Hourly concentrations of ozone (O(3)), 55 volatile organic compounds (VOCs, ozone precursors) and nitrogen oxides (NOx) were measured at an upwind urban site, a downwind suburban site, and a rural site in central Taiwan, from January 2003 to December 2006. VOC and NOx mean concentrations showed a gradient from high to low across the urban (56 ppb and 34 ppb), suburban (38 ppb and 27 ppb) and rural sites (25 ppb and 21 ppb) but a reverse gradient in ozone across these sites (24, 27, and 29 ppb, respectively). Although there was about twice the difference in VOC concentrations between the urban and rural sites, nearly 65% ozone formation potential was contributed to by the same 9 VOCs. Seasonal patterns showed peak ozone levels in autumn and minima in summer at the urban site, but minima in winter at the downwind suburban and rural sites. Ozone precursor levels, on the other hand, were lowest in summer and highest in winter. The diurnal pattern showed that ozone levels peaked one hour later at the rural site than at the urban site. The ethylbenzene to m,p-xylene ratio, an indicator of the age of the air mass, increased from 0.4 at the urban site to 0.6 at the suburban site and 0.8 at the rural site during daily peak ozone times. This finding suggests the transport of ozone and precursors from upwind to downwind producing elevated ozone levels in the suburban and rural areas. Ozone episodes occurred mostly in days with a mean midday UV index of 6.5 (1 UV index=100 J m(-2)) and wind speed at 1.3 m s(-1) at all three sites.     

Estimation of waste generation from floods

A framework of correlation for estimating the amount of waste generation from floods is developed. Flood waste data were collected from four recent typhoons in Taiwan. Parameters affecting the flood waste are analyzed. Population density, flooded area and amount of total rainfall are chosen as the correlating parameters for the model development, and regression diagnostics are performed to check the validity of the collected data. The simple linear model is shown to be incapable of correlating the flood waste data. An exponential model is proposed and shown to give acceptable correlation with the flood waste data spanning five orders of magnitude. The model can be useful in the planning of waste cleanup after floods.     

A new design of groundwater sampling device and its application

Compounds in the atmosphere contaminate samples of groundwater. An inexpensive and simple method for collecting groundwater samples is developed to prevent contamination when the background concentration of contaminants is high. This new design of groundwater sampling device involves a glass sampling bottle with a Teflon-lined valve at each end. A cleaned and dried sampling bottle was connected to a low flow-rate peristaltic pump with Teflon tubing and was filled with water. No headspace volume was remained in the sampling bottle. The sample bottle was then packed in a PVC bag to prevent the target component from infiltrating into the water sample through the valves. In this study, groundwater was sampled at six wells using both the conventional method and the improved method. The analysis of trichlorofluoromethane（ CFC-11 ） concentrations at these six wells indicates that all the groundwater samples obtained by the conventional sampling method were contaminated by CFC-11 from the atmosphere. The improved sampling method greatly eliminated the problems of contamination, preservation and quantitative analysis of natural water.     

Total toxicity equivalents emissions of SF6, CHF3, and CCl2F2 decomposed in a RF plasma environment

Sulfur hexafluorine compound (SF6), trifluoromethane (CHF3) and diclorodifluoromethane (CCl2F2) are extensively used in the semiconductor industry. They are global warming gases. Most studies have addressed the effective decomposition of fluorine compounds, rather than the toxicity of decomposed by-products. Hence, the concepts of toxicity equivalents (TEQs) were applied in this work. The results indicated that HF and SiF4 were the two greatest contributors of TEQ to the SF6/H2/Ar plasma system, while F2 and SiF4 were the two greatest contributors to the SF6/O2/Ar system. Additionally, SiF4 and HF were the two greatest contributors of TEQ to both the CHF3/H2/Ar and CHF3/O2/Ar plasma systems. HF and HCl were the two greatest contributors of TEQ to the CCl2F2/H2/Ar plasma system, and Cl2 and COCl2 were the two greatest contributors to the CCl2F2/O2/Ar system. HCl and HF can be recovered using wet scrubbing, which reduces the toxicity of these emission gases. Consequently, the hydrogen-based plasma system was a better alternative for treating gases that contained SF6, CHF3 and CCl2F2 from the TEQs point of view.     

Juvenile morphology in baleen whale phylogeny

Phylogenetic reconstructions are sensitive to the influence of ontogeny on morphology. Here, we use foetal/neonatal specimens of known species of living baleen whales (Cetacea: Mysticeti) to show how juvenile morphology of extant species affects phylogenetic placement of the species. In one clade (sei whale, Balaenopteridae), the juvenile is distant from the usual phylogenetic position of adults, but in the other clade (pygmy right whale, Cetotheriidae), the juvenile is close to the adult. Different heterochronic processes at work in the studied species have different influences on juvenile morphology and on phylogenetic placement. This study helps to understand the relationship between evolutionary processes and phylogenetic patterns in baleen whale evolution and, more in general, between phylogeny and ontogeny; likewise, this study provides a proxy how to interpret the phylogeny when fossils that are immature individuals are included. Juvenile individuals in the peramorphic acceleration clades would produce misleading phylogenies, whereas juvenile individuals in the paedomorphic neoteny clades should still provide reliable phylogenetic signals.     

Risk for estrogen-dependent diseases in relation to phthalate exposure and polymorphisms of CYP17A1 and estrogen receptor genes

Evidence has shown that polymorphisms of various genes known to be involved in estrogen biosynthesis and function are associated with estrogen-dependent diseases (EDDs). These genes include CYP17A1, estrogen receptor 1 (ESR1), and 2 (ESR2). Phthalates are considered estrogenic endocrine disruptors, and recent research has suggested that they may act as a risk factor for EDDs. However, extremely few studies have assessed the effects of gene–environment interaction on these diseases. We recruited 44 patients with endometriosis or adenomyosis, 36 patients with leiomyoma, and 69 healthy controls from a medical center in Taiwan between 2005 and 2007. Urine samples were collected and analyzed for seven phthalate metabolites using liquid chromatography tandem mass spectrometry. Peripheral lymphocytes were used for DNA extraction to determine the genotype of CYP17A1, ESR1, and ESR2. Compared to controls, patients with leiomyoma had significantly higher levels of total urinary mono-ethylhexyl phthalate (ΣMEHP) (52.1 vs. 29.6 μg/g creatinine, p?=?0.040), mono-n-butyl phthalate (MnBP) (75.4 vs. 51.3 μg/g creatinine, p?=?0.019), and monoethyl phthalate (MEP) (103.7 vs. 59.3 μg/g creatinine, p?=?0.031). In contrast, patients with endometriosis or adenomyosis showed a marginally increased level of urinary MEHP only. Subjects who were homozygous for both the ESR1 C allele (rs2234693) and CYP17A1 C allele (rs743572) showed a significantly increased risk for leiomyoma (OR?=?19.8; 95 % CI, 1.70; 231.5; p?=?0.017) relative to subjects with other genotypes of ESR1 and CYP17A1. These results were obtained after adjusting for age, cigarette smoking, MEHP level, GSTM1 genotype and other covariates. Our results suggested that both CYP17A1 and ESR1 polymorphisms may modulate the effects of phthalate exposure on the development of leiomyoma.     

Product Guide/1982

Abstract

An efficient venturi scrubber system making use of heterogeneous nucleation and condensational growth of particles was designed and tested to remove fine particles from the exhaust of a local scrubber where residual SiH₄ gas was abated and lots of fine SiO₂ particles were generated. In front of the venturi scrubber, normal-temperature fine-water mist mixes with high-temperature exhaust gas to cool it to the saturation temperature, allowing submicron particles to grow into micron sizes. The grown particles are then scrubbed efficiently in the venturi scrubber. Test results show that the present venturi scrubber system is effective for removing submicron particles. For SiO₂ particles greater than 0.1 μm, the removal efficiency is greater than 80–90%, depending on particle concentration. The corresponding pressure drop is relatively low. For example, the pressure drop of the venturi scrubber is ～15.4 ± 2.4 cm H₂O when the liquid-to-gas ratio is 1.50 L/m³. A theoretical calculation has been conducted to simulate particle growth process and the removal efficiency of the venturi scrubber. The theoretical results agree with the experimental data reasonably well when SiO₂ particle diameter is greater than 0.1 μm.