Influence of large-spectrum environmental contamination on the micro-meiobenthic assemblages in harbour sediments of the ligurian sea (W Mediterranean)

The concentration of a large spectrum of environmental contaminants (PCBs, PAHs, pesticides and metals) was assessed in surface sediments of two Ligurian harbours (Sanremo and Alassio, NW Mediterranean Sea, Italy) and their relative impact on micro-meiobenthic assemblages was analysed. Concentration, distribution and relative importance of the different contaminants varied considerably between harbours in relation to the different anthropic activities and contamination sources. Results from Principal Component Analysis indicated that high levels of contaminants were typically correlated with low micro-meiobenthic abundance in the sediment. Heavy metals and the organic enrichment were the main factors affecting the distribution and abundance of the bacterial and meiofaunal assemblages in Alassio harbour, whereas hydrocarbons and pesticides played a major role in Sanremo sediments. Neither the bacteria density nor the meiofauna abundance were dependent on sediment grain size, suggesting that micro-meiobenthic parameters may be under the influence of other variables. Our results suggest that high concentrations of contaminants independently from their source or typology are responsible for the impact observed on micro-meiobenthic assemblages in these harbours.     

Environmental and biological monitoring of benzene in traffic policemen, police drivers and rural outdoor male workers

To evaluate exposure to benzene in urban and rural areas, an investigation into personal exposure to benzene in traffic policemen, police drivers and rural (roadmen) male outdoor workers was carried out. Personal samples and data acquired using fixed monitoring stations located in different areas of the city were used to measure personal exposure to benzene in 62 non-smoker traffic policemen, 22 police drivers and 57 roadmen. Blood benzene, urinary trans-trans muconic acid (t,t-MA) and S-phenyl-mercapturic acid (S-PMA) were measured at the end of work shift in 62 non-smoker traffic policemen, 22 police drivers and 57 roadmen and 34 smoker traffic policemen, 21 police drivers and 53 roadmen. Exposure to benzene was similar among non-smoker traffic policemen and police drivers and higher among non-smoker urban workers compared to rural workers. Blood benzene, t,t-MA and S-PMA were similar among non-smoker traffic policemen and police drivers; blood benzene and t,t-MA were significantly higher in non-smoker urban workers compared to rural workers. Significant increases in t,t-MA were found in smokers vs. non-smokers. In non-smoker urban workers airborne benzene and blood benzene, and t,t-MA and S-PMA were significantly correlated. This study gives an evaluation of the exposure to benzene in an urban area, comparing people working in the street or in cars, to people working in a rural area. Benzene is a certain carcinogen for humans. The results we showed should lead to more in-depth studies about the effects on health of these categories of workers.     

Soil subsampling in environmental sciences: the role of granulometry

Uncertainty associated to analytical results is an issue of major interest for the whole analytical community. A large effort has been made to improve analytical techniques and procedures aimed to achieve a well characterized uncertainty associated with analysis. However, it is becoming increasingly recognised that uncertainty deriving from sampling and subsampling can even dominate the global uncertainty budget. A study on subsampling activities on different soil typologies has been performed by granulometry determinations. The differences between sieving methodologies based on both wet and dry mode have been studied. Subsampling is approached by replicated measurements providing a quantitative assessment of the distribution heterogeneity, a suitable method validation scheme and an empirical determination of uncertainty.     

Comparison of criteria for prediction of runaway reactions in the sulphuric acid catalyzed esterification of acetic anhydride and methanol

Loss of temperature control is one of the major reasons that can lead to runaway reaction. This occurrence is commonly named thermal runway. The aim of this paper is the application of thermal runaway criteria in order to predict the onset of runaway phenomena and define the range of stability related to operating conditions in the reactor, with specific reference to the esterification of acetic anhydride and methanol catalysed by sulphuric acid tested in isoperibolic conditions. The isoperibolic calorimeter has also been used to obtain thermodynamic, kinetic and physical chemistry data necessary to develop a model for the reaction. Some runaway criteria applied in this work require a model for the process, so a model for the analyzed system been developed.Because of the modest reaction enthalpy and low activation energy this reacting system provide a severe test to the runaway criteria.In this work, various runaway criteria have been applied to the experimental and simulated data and the results obtained have been compared.     

Kinetics of monomer biodegradation in soil

In modern intensive agriculture, plastics are used in several applications (i.e. mulch films, drip irrigation tubes, string, clips, pots, etc.). Interest towards applying biodegradable plastics to replace the conventional plastics is promising. Ten monomers, which can be applied in the synthesis of potentially biodegradable polyesters, were tested according to ASTM 5988-96 (standard respirometric test to evaluate aerobic biodegradation in soil by measuring the carbon dioxide evolution): adipic acid, azelaic acid, 1,4-butanediol, 1,2-ethanediol, 1,6-hexanediol, lactic acid, glucose, sebacic acid, succinic acid and terephthalic acid. Eight replicates were carried out for each monomer for 27-45 days. The numerical code AQUASIM was applied to process the CO? experimental data in order to estimate values for the parameters describing the different mechanisms occurring to the monomers in soil: i) the first order solubilization kinetic constant, K(sol) (d?1); ii) the first order biodegradation kinetic constant, K(b) (d?1); iii) the lag time in biodegradation, t(lag) (d); and iv) the carbon fraction biodegraded but not transformed into CO?, Y (-). The following range of values were obtained: [0.006 d?1, 6.9 d?1] for K(sol), [0.1 d?1, 1.2 d?1] for K(b), and [0.32-0.58] for Y; t(lag) was observed for azelaic acid, 1,2-ethanediol, and terephthalic acid, with estimated values between 3.0 e 4.9 d.     

Landfill leachate enhances fermentative hydrogen production from glucose and sugarcane processing derivatives

Fermentation can use renewable raw materials as substrate, which makes it a sustainable method to obtain H₂. This study evaluates H₂ production by a mixed culture from substrates such as glucose and derivatives from sugarcane processing (sucrose, molasses, and vinasse) combined with landfill leachate. The leachate alone was not a suitable substrate for biohydrogen production. However, leachate blended with glucose, sucrose, molasses, or vinasse increased the H₂ production rate by 2.0-, 2.8-, 4.6-, and 0.5-fold, respectively, as compared with the substrates without the leachate. Determination of metals (Cu, Cd, Pb, Hg, Ni, and Fe) at the beginning and at the end of the fermentative assays showed how they were consumed during the fermentation and demonstrated improved H₂ production. During fermentation, Cu, Fe, and Cd were the most consumed leachate metals. The best substrate combination to produce H₂ was molasses and leachate, which gave high volumetric productivity—469 ml H₂/l h. However, addition of the leachate to the substrates stimulated lactic acid formation pathways, which lowered the H₂ yield. The use of leachate combined with sugarcane processing derivatives as substrates could add value to the leachate and reduce its polluting power, generating a clean energy source from renewable raw materials.     

Dynamic of functional microbial groups during mesophilic composting of agro-industrial wastes and free-living (N2)-fixing bacteria application

Although several reports are available concerning the composition and dynamics of the microflora during the composting of municipal solid wastes, little is known about the microbial diversity during the composting of agro-industrial refuse. For this reason, the first parts of this study included the quantification of microbial generic groups and of the main functional groups of C and N cycle during composting of agro-industrial refuse. After a generalized decrease observed during the initial phases, a new bacterial growth was observed in the final phase of the process. Ammonifiers and (N₂)-fixing aerobic groups predominated outside of the piles whereas, nitrate-reducing group increased inside the piles during the first 23 days of composting. Ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB), showed an opposite trend of growth since ammonia oxidation decreased with the increase of the nitrite oxidation activity. Pectinolytics, amylolytics and aerobic cellulolytic were present in greater quantities and showed an upward trend in both the internal and external part of the heaps.Several free-living (N₂)-fixing bacteria were molecularly identify as belonging especially to uncommon genera of nitrogen-fixing bacteria as Stenotrophomonas, Xanthomonas, Pseudomonas, Klebsiella, Alcaligenes, Achromobacter and Caulobacter. They were investigated for their ability to fix atmospheric nitrogen to employ as improvers of quality of compost. Some strains of Azotobacter chrococcum and Azotobacter salinestris were also tested. When different diazotrophic bacterial species were added in compost, the increase of total N ranged from 16% to 27% depending on the selected microbial strain being used. Such microorganisms may be used alone or in mixtures to provide an allocation of plant growth promoting rhizobacteria in soil.     

Influence of large-spectrum environmental contamination on the micro–meiobenthic assemblages in harbour sediments of the ligurian sea (W Mediterranean)

The concentration of a large spectrum of environmental contaminants (PCBs, PAHs, pesticides and metals) was assessed in surface sediments of two Ligurian harbours (Sanremo and Alassio, NW Mediterranean Sea, Italy) and their relative impact on micro–meiobenthic assemblages was analysed. Concentration, distribution and relative importance of the different contaminants varied considerably between harbours in relation to the different anthropic activities and contamination sources. Results from Principal Component Analysis indicated that high levels of contaminants were typically correlated with low micro–meiobenthic abundance in the sediment. Heavy metals and the organic enrichment were the main factors affecting the distribution and abundance of the bacterial and meiofaunal assemblages in Alassio harbour, whereas hydrocarbons and pesticides played a major role in Sanremo sediments. Neither the bacteria density nor the meiofauna abundance were dependent on sediment grain size, suggesting that micro–meiobenthic parameters may be under the influence of other variables. Our results suggest that high concentrations of contaminants independently from their source or typology are responsible for the impact observed on micro–meiobenthic assemblages in these harbours.