Printed wiring boards for mobile phones: characterization and recycling of copper

The popularization of mobile phones, combined with a technological evolution, means a large number of scrap and obsolete equipment are discarded every year, thereby causing economic losses and environmental pollution. In the present study, the printed wiring boards scrap of mobile phones were characterized in order to recycle some of the device components, using techniques of mechanical processing, hydrometallurgy and electrometallurgy. The use of the techniques of mechanical processing (milling, particle size classification, magnetic and electrostatic separation) was an efficient alternative to obtain a concentrated fraction (mainly iron in the magnetic fraction and copper in the conductive fraction) and another fraction containing polymers and ceramics. At the end of mechanical processing, a concentrated fraction of metals could be obtained with an average concentration of 60% copper. This concentrated fraction in metals was dissolved in aqua regia and sent to electrowinning to recover 92% of the dissolved copper. The obtained cathodes have a copper content above 95%, which demonstrates the technical feasibility of recovery of copper using the techniques of mechanical processing, hydrometallurgy and electrometallurgy.     

Utilization of magnetic and electrostatic separation in the recycling of printed circuit boards scrap

The progress of the technology is directly related to the growth of production and consumption of electrical/electronics equipment, especially of personal computers. This type of equipment has a relatively short average lifetime, 2-3 years. The amount of defective or obsolete equipment has been increasing substantially; consequently its disposition and/or recycling should be studied. In this work, printed circuit boards, which are used in personal computers, were studied in order to recover the metals in the circuit boards through mechanical processing, such as crushing, screening, as well as magnetic and electrostatic separation. The results obtained demonstrate the feasibility of using these processes to separate metal fractions from polymers and ceramics, and that it is possible to obtain a fraction concentrated in metals containing more than 50% on average of copper, 24% of tin and 8% of lead.     

Arsenic distribution and pathway scenarios for sediments and water in a peri-urban Mongolian small-scale coal mining area (Nalaikh District,Ulaanbaatar)

The distribution of arsenic (As) in environmental compartments is investigated in the Nalaikh Depression of N-Mongolia. In Nalaikh, lignite coal is mined by artisanal small-scale mining (ASM) approaches. Because As is often associated with sulfuric minerals in coal, it was hypothesized that enrichment of As is related to coal ASM. A second hypothesis considered coal combustion in power plants, and stoves are a key source of As in the local environment. Three mobilization and distribution scenarios were developed for potential As pathways in this semiarid environment. About 43 soil and 14 water sites were analyzed for As concentrations and meaningful parameters in soil and water. About 28 topsoil samples were analyzed in surface-subsurface pairs in order to identify potential eolian surface enrichment. Additionally, fluvial-alluvial sediments and geogenic and anthropogenic deposits were sampled. Water was sampled as surface water, groundwater, precipitation, and industrial water. Results show that As does not pose a ubiquitous risk in the Nalaikh Depression. However, locally and specifically in water, As concentrations may exceed the WHO guideline value for drinking water by up to a factor of 10. A carefully selected sampling strategy allows the evaluation of the distribution scenarios, which reveals a combination of (a) geogenic As in groundwater and distribution via surface water with (b) anthropogenic As redistribution via eolian pathways. An immediate linkage between As redistribution and coal mining is not evident. However, As distribution in fly ash from coal combustion in the local power plant and yurt settlements is the most likely As pathway. Hence, the results indicate the potential influence of diffuse, low-altitude sources on As emission to the environment. As such, this study provides a good example for As distribution under semiarid climate conditions influenced by geogenic and anthropogenic factors.

     

Evaluation of gold and silver leaching from printed circuit board of cellphones

Electronic waste has been increasing proportionally with the technology. So, nowadays, it is necessary to consider the useful life, recycling, and final disposal of these equipment. Metals, such as Au, Ag, Cu, Sn and Ni can be found in the printed circuit boards (PCB). According to this, the aims of this work is to characterize the PCBs of mobile phones with aqua regia; obtaining “reference” values of leaching, to gold and silver, with cyanide and nitric acid, respectively; and study the process of leaching of these metals in alternative leaching with sodium thiosulfate and ammonium thiosulfate. The metals were characterized by digesting the sample with aqua regia for 1 and 2 h at 60 °C and 80 °C. The leaching of Au with a commercial reagent (cyanide) and the Ag with HNO₃were made. The leaching of Au and Ag with alternative reagents: Na₂S₂O_3, and (NH₄)₂S₂O₃ in 0.1 M concentration with the addition of CuSO₄, NH₄OH, and H₂O₂, was also studied. The results show that the digestion with aqua regia was efficient to characterize the metals present in the PCBs of mobile phones. However, the best method to solubilize silver was by digesting the sample with nitric acid. The leaching process using sodium thiosulfate was more efficient when an additional concentration of 0.015 and 0.030 M of the CuSO₄ was added.     

Long-distance dispersal of a subantarctic brooding bivalve (Gaimardia trapesina) by kelp-rafting

The probability of successful dispersal by sessile benthic invertebrates is thought to strongly influence their geographic distribution and population genetics. Generally, species with long-lived planktonic larvae are expected to exhibit wider distribution patterns than those species which brood their young, due to their presumably greater potential for dispersal. In some cases, however, brooding species exhibit broad distributions and show evidence of genetic exchange with geographically distant populations. One potential factor that has been invoked as an expianation is dispersal by floating and rafting of adults and egg masses. Several studies have shown that it is possible for sessile adults to disperse on the order of several to many thousand kilometers by rafting on debris in ocean currents. With very few exceptions, however, direct evidence of rafting in the open ocean has been lacking. We present evidence of long-distance (1300 to 2000 km) dispersal of a brooding pelecypod,Gaimardia trapesina (Lamarck, 1819), in the Southern Ocean in the vicinity of Cape Horn, the Falkland Islands, and the antarctic island South Georgia (54°S; 37°W). Data on survival and fecundity rates ofG. trapesina and the prevalence of kelp rafts collected during the austral winter of 1993 indicate that dispersal by rafting can occur over ecologically relevant time scales and could potentially serve as a significant means of genetic exchange between populations.