Long-term development of inorganic nutrients and chlorophyll alpha in the open northern Baltic Sea

Eutrophication is an ongoing process in most parts of the Baltic Sea. This article reports on the changes during recent decades of several eutrophication-related variables in the open sea areas surrounding Finland (wintertime nutrient concentrations, wintertime nutrient ratios, and summer time chlorophyll alpha concentrations at the surface). The sum of nitrate- and nitrite-nitrogen ([NO3+NO2]-N) was observed to increase nearly fourfold in the Northern Baltic Proper and the Gulf of Finland and almost double in the Bothnian Sea from the 1960s until the 1980s or 1990s. The increase was followed by a decrease, which was modest in the two former subregions. Phosphate-phosphorus (PO4-P) concentrations followed a similar pattern in the Northern Baltic Proper (threefold increase and subsequent slight decrease) and Bothnian Sea (30% increase and subsequent decrease), but increased throughout the study in the Gulf of Finland, with the present concentration being threefold to the measurements made in the early 1970s. The PO4-P concentration decreased throughout the study in the Bothnian Bay. Silicate-silicon (SiO4-Si) concentrations decreased 30-50% from the early 1970s to the late 1990s and increased 20-40% thereafter in the Northern Baltic Proper, the Gulf of Finland, and the Bothnian Sea. Chlorophyll alpha showed an increase of over 150% in the Northern Baltic Proper and the Gulf of Finland from the 1970s until the early 2000s. In the Bothnian Sea the chlorophyll alpha concentration increased more than 180% from the late 1970s until the late 1990s, and decreased thereafter. According to these long-term observations, the Gulf of Finland and Northern Baltic Proper show clear signs of eutrophication, which may be emphasized by hydrographical changes affecting the phytoplankton communities and thus the algal biomass.     

On the uncertainty and confidence in decision support tools (DSTs) with insights from the Baltic Sea ecosystem

Ecosystems around the world are increasingly exposed to multiple, often interacting human activities, leading to pressures and possibly environmental state changes. Decision support tools (DSTs) can assist environmental managers and policy makers to evaluate the current status of ecosystems (i.e. assessment tools) and the consequences of alternative policies or management scenarios (i.e. planning tools) to make the best possible decision based on prevailing knowledge and uncertainties. However, to be confident in DST outcomes it is imperative that known sources of uncertainty such as sampling and measurement error, model structure, and parameter use are quantified, documented, and addressed throughout the DST set-up, calibration, and validation processes. Here we provide a brief overview of the main sources of uncertainty and methods currently available to quantify uncertainty in DST input and output. We then review 42 existing DSTs that were designed to manage anthropogenic pressures in the Baltic Sea to summarise how and what sources of uncertainties were addressed within planning and assessment tools. Based on our findings, we recommend future DST development to adhere to good modelling practise principles, and to better document and communicate uncertainty among stakeholders.Electronic supplementary materialThe online version of this article (doi:10.1007/s13280-020-01385-x) contains supplementary material, which is available to authorized users.     

Influence of air flow rate on emission of DEHP from vinyl flooring in the emission cell FLEC: Measurements and CFD simulation

The emission of di-(2-ethylhexyl)phthalate (DEHP) from one type of vinyl flooring with ～15% (w/w) DEHP as plasticizer was measured at 22 °C in five FLECs + one blank FLEC (Field and Laboratory Emission Cell). Initially, the flow through all FLECs was 450 ml min^?1. After 689 days the flows were changed to 1000 ml min^?1, 1600 ml min^?1, 2300 ml min^?1, and 3000 ml min^?1, respectively, in four FLECs, and kept at 450 ml min^?1 in one FLEC. Air samples were collected from the effluent air at regular intervals. After 1190 days the experiments were terminated and the interior surfaces of all six FLECs were rinsed with methanol to estimate the internal surface concentrations of DEHP. The DEHP air concentration and specific emission rate (SER) at steady state was estimated for the five different flow rates. The steady-state concentrations decreased slightly with increasing air flow with only the two highest flow rates resulting in significantly lower concentrations. In contrast, the SERs increased significantly. Despite large variation, the internal surface concentrations appeared to decrease slightly with increasing FLEC flow. Computational fluid dynamic (CFD) simulations suggest that the interior gas and surface concentrations were roughly uniform for the low flow case (450 ml min^?1), under which, the partitioning between the FLEC internal surface and chamber air was examined. Although paired t-tests showed no difference between CFD and experimental results for DEHP air concentrations and SERs at steady-state conditions, CFD indicated that the experimental DEHP surface concentrations in the FLECs were underestimated. In conclusion, the experiments showed that the emission of DEHP from vinyl flooring is subject to “external” control and that the SER is strongly and positively dependent on the air exchange rate. However, the increased SER almost compensates for the decrease in gas-phase concentration caused by the increased air exchange.     

Exposure to inhalable dust and endotoxin among Danish livestock farmers: results from the SUS cohort study

Studies on personal dust and endotoxin concentrations among animal farmers have been either small or limited to a few sectors in their investigations. The present study aimed to provide comparable information on the levels and variability of exposure to personal dust and endotoxin in different types of animal farmers. 507 personal inhalable dust samples were collected from 327 farmers employed in 54 pig, 26 dairy, 3 poultry, and 3 mink farms in Denmark. Measurements in pig and dairy farmers were full-shift and performed during summer and winter, while poultry and mink farmers were monitored during 4 well-defined production stages. The collected samples were measured for dust gravimetrically and analyzed for endotoxin by the Limulus amebocyte lysate assay. Simple statistics and random-effect analysis were used to describe the levels and the variability in measured dust and endotoxin exposure concentrations. Measured inhalable dust levels had an overall geometric mean of 2.5 mg m(-3) (range 相似文献   

Factors regulating the coastal nutrient filter in the Baltic Sea

Ambio - The coastal zone of the Baltic Sea is diverse with strong regional differences in the physico-chemical setting. This diversity is also reflected in the importance of different...