Evaluation of the gene expression changes in Nile tilapia (<Emphasis Type="Italic">Oreochromis niloticus</Emphasis>) as affected by the bio-removal of toxic textile dyes from aqueous solution in small-scale bioreactor

A laboratory-scale bioremediation unit was designed, built and tested for the bio-removal of several Direct textile dyes. Four experiments were carried out to assess the efficiency of the bioremediation unit using Aspergillus niger fungal strain. Three commonly used Direct dyes and textile dyes mixture (simulated effluent: Direct brown, Direct violet, Direct green) were tested in this study. The strain of A. niger was efficient in the removal of the three Direct dyes. The decolorization percentages of the dyes after 24 h of incubation were 56.2, 51.7, and 95.4% for Direct brown, Direct green, Direct violet dyes, respectively. The percentages increased up to 79.4, 86.4, and 96.7% after 72 h of incubation for the same dyes, respectively. The results also showed that the fungal strain reduced the chemical oxygen demand values of simulated dye effluents from 165 to 564 mg/l with most of the dyes. The assessment of bioremediation products on biomodel was conducted using a fresh water fish. The liver and brain of Nile tilapia were tested to evaluate the expression of genes coding for several proteins related to stress such as metallothioneins (MTs), cytochrome P450 (CYP450), and heat shock proteins (HSPs). To assess the alterations in the gene expression, ten animals from each group were killed after 4 weeks of treatment. The results revealed significant increases in the brain and hepatic mRNA levels of all stress protein genes MT, CYP450, Hsp70a, b, and Hsp47 in the fish groups treated with industrial Direct violet, green, and brown dye water. Exposure of tilapia to bioremediation products after treatment with A. niger fungi reduced the over-expression of the stress protein genes in the brain and liver tissues.     

Technologically enhanced 210Pb and 210Po in iron and steel industry

Iron and steel manufacture has been ranked as the largest industrial source of environmental contamination in the USA; the wastes generated in their production processes contain heavy elements that can be a source of contamination, and natural radionuclides that can produce an occupational and/or public radiological impact. In this work the potential occupational effective dose rate (μSv/y) due to inhalation in four integrated steel-making factories from Egypt has been evaluated, by assuming a well defined scenario and with basis in the ²¹⁰Pb and ²¹⁰Po activity concentrations determined in ore and wastes collected in the aforementioned factories. Activity concentrations, in Bq/kg, of ²¹⁰Pb and ²¹⁰Po, and leachable Pb and Fe were measured using gamma-ray spectrometry based on HPGe detector, alpha particle spectrometry based on PIPS detector, and inductively coupled plasma-mass spectrometry (ICP-MS). Levels of ²¹⁰Pb and ²¹⁰Po in the range of <DL-4238 and 1-5660 Bq/kg, respectively, were found. According to the assumed scenarios, the occupational exposures by inhalation are much lower than the recommended annual effective dose limit, although the environmental impact due to waste storage and/or use should be considered based on case by case evaluation.     

Influence of preparation method on structural,optical, magnetic,and adsorption properties of nano-NiFe2O4

Nickel ferrite (NiFe₂O₄) nanoparticles are prepared through different routes (microwave, co-precipitation, and pyrolysis) and tested for water purification applications through adsorption removal of an acid red dye B as a model organic pollutant. The characterizations of the prepared samples were done using XRD, FT-IR, SEM, TEM, BET, UV-Vis absorbance, Raman spectrum, and vibrating sample magnetometer (VSM). All samples showed an inverse spinel crystal structure. The obtained results pointed out to the effect of the synthetic route on the morphology, particle size, optical, and magnetic properties of the prepared ferrites. Magnetic measurements showed super-paramagnetic behavior for all samples. The magnetic saturation (M_s) of the sample prepared by pyrolysis, was found to possess the highest saturation value, 34.8 emu/g. Adsorption experiments were performed under the change in several parameters, such as pH, adsorbent dosage, and initial dye concentration. A dye removal percentage of 99% was reached under the optimum state. The isothermal adsorption of the acid red dye was investigated using several models, in which the experimental data could be best described by the Freundlich model. Several kinetic and equilibrium models were inspected by linear regression analysis and showed best fitting for the adsorption data through pseudo-second-order model. The calculated thermodynamic parameters indicated that the adsorption of acid red dye onto all the ferrite samples is a spontaneous and endothermic physical adsorption process.

     

X-ray metal assessment and ovarian ultrastructure alterations of the beetle,Blaps polycresta (Coleoptera,Tenebrionidae), inhabiting polluted soil

Environmental Science and Pollution Research - X-ray analysis was applied to estimate the percentages of heavy metals in ovarian tissues of the tenebrionid beetle, Blaps polycresta. Calcium,...     

Chromium removal from water by activated carbon developed from waste rubber tires

Because of the continuous production of large amount of waste tires, the disposal of waste tires represents a major environmental issue throughout the world. This paper reports the utilization of waste tires (hard-to-dispose waste) as a precursor in the production of activated carbons (pollution-cleaning adsorbent). In the preparation of activated carbon (AC), waste rubber tire (WRT) was thermally treated and activated. The tire-derived activated carbon was characterized by means of scanning electron microscope, energy-dispersive X-ray spectroscopy, FTIR spectrophotometer, and X-ray diffraction. In the IR spectrum, a number of bands centred at about 3409, 2350, 1710, 1650, and 1300–1000 cm^?1 prove the present of hydroxyl and carboxyl groups on the surface of AC in addition to C═C double bonds. The developed AC was tested and evaluated as potential adsorbent removal of chromium (III). Experimental parameters, such as contact time, initial concentration, adsorbent dosage and pH were optimized. A rapid uptake of chromium ions was observed and the equilibrium is achieved in 1 h. It was also found that the adsorption process is pH dependent. This work adds to the global discussion of the cost-effective utilization of waste rubber tires for waste water treatment.     

Polyurethane rotating disc system for post-treatment of anaerobically pre-treated sewage

The performance of polyurethane rotating discs (RBC-1) versus polystyrene rotating discs (RBC-2) for the treatment of an up-flow anaerobic sludge blanket (UASB) reactor effluent fed with domestic wastewater was investigated. Both RBC units were operated at the same organic loading rate (OLR) of 10.5 gCOD/m² d. and a hydraulic retention time (HRT) of 2.5 h. The residual values of COD fractions (COD_suspended, COD_colloidal and COD_soluble) in the treated effluent of RBC-1 and RBC-2 were similar. However, the removal efficiency of ammonia in the RBC-1 (87 ± 4%) was significantly higher than that found for RBC-2 i.e. 24 ± 6%. Moreover, RBC-1 achieved a substantial removal efficiency of 99.0 ± 1% for Escherichia coli (E. coli), while RBC-2 removed 91.2 ± 0.3%. Based on these results, optimization of RBC-1 treating UASB reactor effluent was extensively performed. The RBC-1 was operated at an OLR's of 4.0, 11 and 23 gCOD/m² d. The results obtained showed that increasing the OLR from 11.0 to 23.0 gCOD/m² d and decreasing the HRT from 2.5 to 1.25 h significantly declined the effluent quality of COD_total and ammonia. However, the residual values of COD_total and ammonia remained unaffected when increasing the OLR from 4.0 to 11.0 gCOD/m² d and by decreasing the HRT from 5 to 2.5 h. Bacteriological examination showed that the mean residual count of E. coli remained at a level of 10⁴/100 ml, in the effluent of RBC-1 independent on the imposed HRT. Accordingly, it is recommended to operate RBC-1 for treatment of anaerobically pre-treated sewage at an OLR of 11 gCOD/m² d and an HRT of 2.5 h.A feed-less (ammonia limitation) period of 9.0 days followed by 9.0 days feeding with high OLR of 26 gCOD/m² d. (raw sewage) was investigated to elaborate, if the nitrifiers of the RBC-1 are capable to convert ammonia to nitrate after totally 18 days when retuning back to the normal operating conditions. The results of the experiment clearly show a strong and immediate detrimental effect of imposing high OLR of 26 gCOD/m² d on the nitrification process in the nitrifying RBC unit. However, after returning back to the original OLR of 10.6 gCOD/m² d, the nitrification efficiency in the RBC unit was recovered within 2–3 days.     

Sulfonated graphene nanomaterials for membrane antifouling,pollutant removal,and production of chemicals from biomass: a review

Water pollution and the unsustainable use of fossil fuel derivatives require advanced catalytic methods to clean waters and to produce fine chemicals from modern biomass. Classical homogeneous catalysts such as sulfuric, phosphoric, and hydrochloric acid are highly corrosive and non-recyclable, whereas heterogeneous catalysts appear promising for lignocellulosic waste depolymerization, pollutant degradation, and membrane antifouling. Here, we review the use of sulfonated graphene and sulfonated graphene oxide nanomaterials for improving membranes, pollutant adsorption and degradation, depolymerization of lignocellulosic waste, liquefaction of biomass, and production of fine chemicals. We also discuss the economy of oil production from biomass. Sulfonated graphene and sulfonated graphene oxide display an unusual large theoretical specific surface area of 2630 m²/g, allowing the reactants to easily enter the internal surface of graphene nanosheets and to reach active acid sites. Sulfonated graphene oxide is hydrophobic and has hydrophilic groups, such as hydroxyl, carboxyl, and epoxy, thus creating cavities on the graphene nanosheet’s surface. The adsorption capacity approached 2.3–2.4 mmol per gram for naphthalene and 1-naphthol. Concerning membranes, we observe an improvement of hydrophilicity, salt rejection, water flux, antifouling properties, and pollutant removal. The nanomaterials can be reused several times without losing catalytic activity due to the high stability originating from the stable carbon–sulfur bond between graphene and the sulfonic group.

     

Technological trends in nanosilica synthesis and utilization in advanced treatment of water and wastewater

Environmental Science and Pollution Research - Water and wastewater treatment applications stand to benefit immensely from the design and development of new materials based on silica nanoparticles...     

Pedestrian crashes at priority-controlled junctions,roundabouts, and signalized junctions: The UK case study

Objectives: Over half of pedestrians killed and seriously injured in Great Britain in 2015 were involved in crashes at junctions. This study investigates the nature of these crashes.

Methods: A study was conducted into pedestrian casualty crashes at priority controlled junctions, roundabouts and signalised junctions in England between 2005 and 2015 using information from the UK STATS19 accident database, the UK National Travel Survey and the UK National Census. Consideration was given to coding frequencies of contributory factors, exposure (in terms of miles walked or driven) as well as age, gender and the resident deprivation index of the road users involved.

Results and Conclusions: In terms of indicative blame, the coding frequencies of subjectively determined pedestrian actions and behaviour factors which might have contributed to pedestrian casualty crashes were found to be between 1.6 and 2.8 times the frequencies of driver actions and behavioural factors. Substantial social gradients were found in pedestrian casualty rates per miles walked and in the driver involvement rates per mile driven with those from the most deprived quintile having higher rates. In addition, it was found that female pedestrians, aged 60 years and over, had higher pedestrian casualty rates, per billion miles walked, for all three junction types, when compared with males and females under the age of 60 years, apart from male pedestrians aged 16 years and younger at priority controlled junctions.     

Evaluation of micro- and nano-carbon-based adsorbents for the removal of phenol from aqueous solutions

This work reports on the adsorption efficiency of two classes of adsorbents: nano-adsorbents including carbon nanotubes (CNTs) and carbon nanofibers (CNFs); and micro-adsorbents including activated carbon (AC) and fly ash (FA). The materials were characterized by thermogravimetric analysis, transmission electron microscopy, Brunauer–Emmett–Teller (BET) specific surface area, zeta potential, field emission scanning electron microscopy, and UV spectroscopy. The adsorption experimental conditions such as pH of the solution, agitation speed, contact time, initial concentration of phenol, and adsorbent dosage were optimized for their influence on the phenol. The removal efficiency of the studied adsorbents has the following order: AC > CNTs > FA > CNFs. The capacity obtained from Langmuir isotherm was found to be 1.348, 1.098, 1.007, and 0.842 mg/g of AC, CNTs, FA, and CNFs, respectively, at 2 hours of contact time, pH 7, an adsorbent dosage of 50 mg, and a speed of 150 rpm. The higher adsorption of phenol on AC can be attributed to its high surface area and its dispersion in water. The optimum values of these variables for maximum removal of phenol were also determined. The experimental data were fitted well to Langmuir than Freundlich isotherm models.