Calculating losses of crops in Denmark caused by high ozone levels

In order to help guide air pollution legislation at the European level, harmful air pollution effects on agriculture crops and the consequent economic implications for policy have been studied for more than a decade. Ozone has been labeled as the most serious of the damaging air pollutants to agriculture, where growth rates and consequently yields are dramatically reduced. Quantifying the effects has formed a key factor in policymaking. Based on the widely held view that AOT40 (Accumulated exposure Over Threshold of 40 ppb) is a good indicator of ozone-induced damage, the Danish Eulerian Model (DEM) was used to compute reduced agriculture yields on a 50 km×50 km grid over Europe. In one set of scenarios, a ten year meteorological time series was combined with realistic emission inventories. In another, various idealized emission reduction scenarios are applied to the same meteorological time series. The results show substantial inter-annual variability in economic losses, due in most part to meteorological conditions which varied much more substantially than the emissions during the same period. It is further shown that, taking all uncertainties into account, estimates of ozone-induced economic losses require that a long meteorological record is included in the analysis, for statistical significance to be improved to acceptable levels for use in policy analysis. In this study, calculations were made for Europe as a whole, though this paper presents results relevant for Denmark.     

Testing the importance of accurate meteorological input fields and parameterizations in atmospheric transport modelling using dream - validation against ETEX-1

A tracer model, the DREAM, which is based on a combination of a near-range Lagrangian model and a long-range Eulerian model, has been developed. The meteorological meso-scale model, MM5V1, is implemented as a meteorological driver for the tracer model. The model system is used for studying transport and dispersion of air pollutants caused by a single but strong source as, e.g. an accidental release from a nuclear power plant. The model system including the coupling of the Lagrangian model with the Eulerian model are described. Various simple and comprehensive parameterizations of the mixing height, the vertical dispersion, and different meterological input data have been implemented in the combined tracer model, and the model results have been validated against measurements from the ETEX-1 release. Several different statistical parameters have been used to estimate the differences between the parameterizations and meterological input data in order to find the best performing solution.     

Development of statistical models for predicting muscle and mental activities during repetitive precision tasks

This study was conducted to develop muscle and mental activities on repetitive precision tasks. A laboratory experiment was used to address the objectives. Surface electromyography was used to measure muscle activities from eight upper limb muscles, while electroencephalography recorded mental activities from six channels. Fourteen university students participated in the study. The results show that muscle and mental activities increase for all tasks, indicating the occurrence of muscle and mental fatigue. A linear relationship between muscle activity, mental activity and time was found while subjects were performing the task. Thus, models were developed using those variables. The models were found valid after validation using other students’ and workers’ data. Findings from this study can contribute as a reference for future studies investigating muscle and mental activity and can be applied in industry as guidelines to manage muscle and mental fatigue, especially to manage job schedules and rotation.     

Numerical integration of chemical ODE problems arising in air pollution models

The numerical treatment of a regional air pollution model (such models are, as a rule, described mathematically by systems of partial differential equations) leads to the solution of very large computational problems. The chemical submodel of an air pollution model is normally the most timeconsuming part of the computational work. The application of appropriate discretization and splitting procedures reduces the chemical submodel to a large number of relatively small ODE systems (one such system per gridpoint). In the process of searching for efficient numerical algorithms for the chemical submodels one can carry out experiments by using only one such ODE system in order to facilitate the work. This approach has been used in connection with a particular chemical scheme, the condensed CBM IV scheme, which is used in several large air pollution models. Six integration algorithms have been tested on a set of typical scenarios (consisting of different starting concentrations and/or of different values of the emissions). The advantages and the disadvantages of the algorithms tested are discussed. The final decision about the most efficient algorithm, among the algorithms tested, should be made after a second series of experiments. The coupling of the chemical process with the transport of air pollution (on, at least, a twodimensional domain) together with the application of highspeed computers has to be studied in the second series of experiments, which will be performed in a subsequent paper.     

New parameterization scheme for effective indices for emissions from road transport

The local to regional processes of chemical transformations, washout and dry deposition cannot be directly resolved in global scale models, they rather need to be parameterized. A suitable way to account for the non-linearity, e.g., in chemical transformation processes, is the use of effective emission indices (EEIs). EEI translate the actual (small scale) emissions into input for global scale models, partially accounting for unresolved processes occurring shortly after the release of the emissions.The emissions from the road traffic have some specifics, because of which the concept of deriving EEI from the interaction of an instantaneous plume with the ambient air is perhaps not so convenient. A new parameterization scheme for the EEI from the road transport is suggested in the present paper, based on few simplifying assumptions and introducing the adjoin equations approach, which makes it possible to achieve unified, not depending on the specific emission pattern, procedure for calculating the EEI from road traffic.     

Impact of climate changes on pollution levels in Denmark

The impact of climate changes on the pollution levels in Denmark is the major topic of this paper. Variations of the Danish air pollution levels that are caused by climatic changes are studied together with variations caused by other factors (emissions, inter-annual variability of meteorological conditions, etc.). The Unified Danish Eulerian Model (UNI-DEM) was run on a fine, 10 km × 10 km, grid over a space domain covering all of Europe to minimize the influence of the boundary conditions on the Danish pollution levels. This study is based on four categories of scenarios: (i) traditional scenarios, (ii) climatic scenarios, (iii) scenarios with variations of the human-made (anthropogenic) emissions and (iv) scenarios in which the biogenic emissions were varied. The total number of applied scenarios was 14, and a time-period of 16 years was used. The results show clearly that although the concentrations of the major pollutants do not depend too much on the climatic changes, some quantities, in particular quantities related to high ozone levels, might be increased significantly as a result of the warming trends in the future climate. The reason for this phenomenon is explained.     

The Relation Between Upper Limb Muscle and Brain Activity in Two Precision Levels of Repetitive Light Tasks

A study was conducted to investigate the effects of repetitive light tasks of low and high precision on upper limb muscles and brain activities. Surface electromyography (EMG) and electroencephalography (EEG) were used to measure the muscle and brain activity of 10 subjects. The results show that the root-meansquare (RMS) and mean power frquency (MPF) of the muscle activity and the mean power of the EEG alpha bands were higher on the high-precision task than on the low-precision one. There was also a high and significant correlation between upper limb muscle and brain activity during the tasks. The longer the time and the more precise the task, the more the subjects become fatigued both physically and mentally. Thus, these results could be potentially useful in managing fatigue, especially fatique related to muscle and mental workload.     

The relation between upper limb muscle and brain activity in two precision levels of repetitive light tasks

A study was conducted to investigate the effects of repetitive light tasks of low and high precision on upper limb muscles and brain activities. Surface electromyography (EMG) and electroencephalography (EEG) were used to measure the muscle and brain activity of 10 subjects. The results show that the root-mean-square (RMS) and mean power frquency (MPF) of the muscle activity and the mean power of the EEG alpha bands were higher on the high-precision task than on the low-precision one. There was also a high and significant correlation between upper limb muscle and brain activity during the tasks. The longer the time and the more precise the task, the more the subjects become fatigued both physically and mentally. Thus, these results could be potentially useful in managing fatigue, especially fatique related to muscle and mental workload.     

Removal of ammoniacal nitrogen (N-NH3) from municipal solid waste leachate by using activated carbon and limestone.

The presence of ammoniacal nitrogen (N-NH3) in leachate is one of the problems normally faced by landfill operators. Slow leaching of wastes producing nitrogen and no significant mechanism for transformation of N-NH3 in the landfills causes a high concentration of ammoniacal nitrogen in leachate over a long period of time. A literature review showed that the removal of ammoniacal nitrogen from leachate was not well documented and to date, there were limited studies in Malaysia on this aspect, especially in adsorption treatment. The main objective of the present study was to investigate the suitability of activated carbon, limestone and a mixture of both materials as a filtering medium, in combination with other treatments capable of attenuating ammoniacal nitrogen which is present in significant quantity (between 429 and 1909 mg L(-1)) in one of the landfill sites in Malaysia. The results of the study show that about 40% of ammoniacal nitrogen with concentration of more than 1000 mg L(-1) could be removed either by activated carbon or a mixture of carbon with limestone at mixture ratio of 5:35. This result shows that limestone is potentially useful as a cost-effective medium to replace activated carbon for ammoniacal nitrogen removal at a considerably lower cost.     

The effect of job and environmental factors on job satisfaction in automotive industries.

A methodology was developed for diagnosing industrial work, which includes questionnaire, observation, measurements, data collection and statistical analysis. A survey was conducted to investigate the relationship between job satisfaction and factors that affect work design in 2 automotives manufacturing companies in Malaysia. A basic work design model was proposed. The aim of this model was to determine the factors that influence employees' perception towards their work. A set of multiple-choice questionnaires was developed and data was collected by interviewing employees at a production plant. The survey focused on job and environmental factors. The results supported the proposed model and showed that job and environmental factors were significantly related to job satisfaction. They highlighted the significant influence of age, work experience and marital status on job satisfaction. Further, environmental factors, especially the surroundings, context dependence and the building's function, also had a significant impact on job satisfaction.