可张孔曝气器曝气能耗试验研究

通过试验研究，总结出可张孔曝气阻力损失的影响因素，以优化产品的结构设计参数，降低产品在工程应用中的能耗，获取更好的经济效益。     

构树修复对重金属污染土壤环境质量的影响

通过温室盆栽试验,研究构树（Broussonetia papyrifera）生长对重金属污染土壤酶活性和微生物群落结构的影响.结果表明,构树修复污染土壤中酶活性和微生物多样性明显提高.经270d培养后,构树生长土壤中蔗糖酶和酸性磷酸酶活性与种植土壤相比分别显著（P<0.05）提高3.12倍和2.29倍;土壤脱氢酶与有效态As、Cd、Pb、Zn和Cu含量,蔗糖酶与有效态Cd含量,以及磷酸酶与有效态Cd和Cu含量之间呈显著负相关（P<0.05）.根据16S和18S rDNA PCR-DGGE分析表明,构树修复可提高污染土壤中细菌和丛枝菌根真菌多样性.上述结果表明,构树修复可有效改善重金属污染土壤的环境质量.然而,污染土壤中重金属有效态含量下降不明显,必须辅助物理和化学措施来强化构树对重金属污染土壤的生态修复潜力.     

油罐铁的硫化物"自燃"危害及防护措施

分析了铁的硫化物的危害特性，阐述了硫化物“自燃”产生的热量是造成油罐发生火灾事故的主要原因，并提出了相应的防护措施，提高油罐日常使用的安全可靠性。     

煤矿风井轴流风机噪声控制设计计算

煤矿风井轴流风机气流速度大,扩散口噪声辐射强度高达113dB(A),降噪难度较大的低频成份突出。正确合理的低频噪声控制设计计算是噪声控制成功的关键。     

兰州市城市生活垃圾处理研究

城市生活垃圾是指在城市日常生活中或者为城市日常生活提供服务的活动中产生的固体废物以及法律、行政规定视为城市生活垃圾的固体废弃物.随着中国城市化进程的加快和人民生活水平的提高,城市生活垃圾也在以每年8%～10%的速度增长,若垃圾问题得不到妥善解决,就会制约兰州市的发展.在对兰州市城市生活垃圾处理现状及存在问题分析的基础上,根据兰州市生活垃圾的特性,提出兰州市城市生活垃圾的处理办法:兰州市城市生活垃圾应当推行分类收集制度,由目前单一的卫生填埋处理走向资源化综合处理.     

活性碳纤维吸附废气中的丙烯酸和甲苯

采用动态吸附法探讨了在活性碳纤维对模拟废气中丙烯酸和甲苯的吸附过程中,各因素对活性碳纤维穿透吸附量和饱和吸附量的影响。实验结果表明,在模拟废气中丙烯酸质量分数为0.2%、双柱塞泵流量为6.1mL/h、载气流量为1.60L/min的条件下,穿透时间为10min,活性碳纤维的穿透吸附量为227.5mg/g,饱和吸附时间为40min,活性碳纤维的饱和吸附量为460.0m g/g。     

Determination of 15 phthalate esters in air by gas-phase and particle-phase simultaneous sampling

Based on previous research, the sampling and analysis methods for phthalate esters (PAEs) were improved by increasing the sampling flow of indoor air from 1 to 4 L/min, shortening the sampling duration from 8 to 2 hr. Meanwhile, through the optimization of chromatographic conditions, the concentrations of 9 additional PAE pollutants in indoor air were measured. The optimized chromatographic conditions required a similar amount of time for analysis as before, but gave high responsivity, the capability of simultaneously distinguishing 15 kinds of PAEs, and a high level of discrimination between individual sample peaks, as well as stable peak generation. The recovery rate of all gas-phase and particle-phase samples of the 15 kinds of PAEs ranged from 91.26% to 109.42%, meeting the quantitative analysis requirements for indoor and outdoor air sampling and analysis. For the first time, investigation of the concentration levels as well as characteristics of 15 kinds of PAEs in the indoor air from four different traffic micro-environments (private vehicles, busses, taxis and subways) was carried out, along with validation of the optimized sampling and analytical method. The results show that all the 9 additional PAEs could be detected at relatively high pollution levels in the indoor air from the four traffic micro-environments. As none of the pollution levels of the 15 kinds of PAEs in the indoor air from the 4 traffic micro-environments should be neglected, it is of great significance to increase the types of PAEs able to be detected in indoor air.     

城镇化生态风险预警系统设计与关键技术研究

城镇化的快速发展,对周围的生态环境构成了巨大的威胁,城镇化的过程中存在的不确定性发展变化因素影响了城市生态风险预警的准确性,甚至会导致错误的风险管理决策。以CLUE-S模型和灰色数学模型为关键预警技术,利用CLUE-S模型预测城镇化过程中空间信息变化的趋势,利用灰色数学模型预测监测和统计的非空间信息指标的发展趋势,最终形成了以GIS技术为核心的生态安全信息数据库,并通过空间研究和基础数据分析建立城镇化生态风险预警系统,可时时掌握区域的生态承载力风险警情,且可针对不同的城市发展状态进行不同的预案预测,以为区域生态安全管理提供准确可靠的辅助决策支持。     

金属尖化前缘模型主动式热疏导性能试验研究

目的为了更好地解决高超声速飞行器舵、翼前缘及头锥等气动热环境恶劣区域的热防护问题。方法采用主动式热疏导技术,以高温液态合金为工质,设计并制作具有主动式热疏导功能的尖化前缘金属试验模型(R=5 mm)。根据模型外尺寸设计加工一套石英灯仿形加热器和热流测试模型,开展地面热环境模拟试验。结果试件在前缘中心温度530℃左右时具有瞬态启动特性。前缘中心和大面积中心最大辐射热流密度分别为1000 kw/m^2和580 kw/m^2,试件在该环境中长时间受热状态下仍具有较好的热疏导能力。试验后试件无工质泄漏和结构破坏,具有一定的可重复使用性。结论可以此热疏导方式结合现有成熟热防护技术进一步开展工程设计与应用。     

Adsorption of lead on multi-walled carbon nanotubes with different outer diameters and oxygen contents: Kinetics, isotherms and thermodynamics

The effects of different outer diameters and surface oxygen contents on the adsorption of heavy metals onto six types of multi-walled carbon nanotubes (MWCNTs) were investigated in an aqueous solution and lead was chosen as a model metal ion. The results indicated that the percentage removal and adsorption capacity of lead remarkably increased with decreasing outer diameter due to larger specific surface area (SSA). The SSA-normalized maximum adsorption capacity (qm /SSA) and SSA-normalized adsorption coefficient (Kd /SSA) were strongly positively correlated with surface oxygen content, implying that lead adsorption onto MWCNTs significantly increases with the rise of oxygen content and decreases with decreasing SSA. The calculated thermodynamic parameters indicated that adsorption of lead on MWCNTs was endothermic and spontaneous. When the oxygen content of MWCNTs increased from 2.0% to 5.9%, the standard free energy (△ G0 ) became more negative, which implied that the oxygenated functional groups increased the adsorption affinity of MWCNTs for lead. Through calculation of enthalpy (△ H0 ), G0 and free energy of adsorption (Ea ), lead adsorption onto MWCNTs was recognized as a chemisorption process. The chemical interaction between lead and the phenolic groups of MWCNTs could be one of the main adsorption mechanisms due to highly positive correlations between the phenolic groups and K d /SSA or q m /SSA.