燃煤电厂电-袋复合式除尘器优化控制的仿真运行研究

以电-袋复合式除尘器为仿真研究对象,在Windows界面下利用Visual Basic6．0编程语言开发出燃煤电厂电-袋复合式除尘器优化控制的仿真运行软件。该软件通过建立数学模型,进行仿真实验,模拟工况变化、优化运行参数等对电-袋复合除尘系统进行整体的优化控制,并综合分析电-袋复合除尘器运行过程中的能耗以及运行费用,对运行电压、电流、运行阻力、喷吹周期等参数进行了优化。该仿真软件达到了电一袋除尘系统的节能降耗的目的,同时也降低了电～袋复合除尘器的运行成本。     

氟磺隆水解动力学研究

采用试验室内模拟试验的方法,研究不同pH的缓冲溶液和不同自然水体对氟磺隆水解的影响。实验结果表明,不同pH缓冲溶液和不同自然水体对氟磺隆水解速率均有不同程度的影响。在碱性条件下氟磺隆的水解速率最快,半衰期为0.2 d,酸性条件下次之,半衰期为6.0 d,在中性条件下水解较慢,半衰期为15.7 d,而在不同自然水体中氟磺隆的降解速率为:伊通河水稻田水青湖水蒸馏水。     

Biodegradation of Poly(Aspartic Acid-Itaconic Acid) Copolymers by Miscellaneous Microbes from Natural Water

Poly(aspartic acid-itaconic acid) copolymers (PAI) is a new scale inhibitor for water treatment. Thus, it is necessary to investigate its biodegradability. The biodegradability of PAI was investigated through CO₂ evolution tests under different conditions based on determination of carbon dioxide production. The investigation results showed that the degradation rate of PAI on day 10 and day 28 were respectively 38.7 and 79.5%, indicating that PAI was one kind of easily biodegradable scale inhibitors. With the increase in the content of itaconic acid in copolymerization process, the biodegradability of PAI was significantly reduced. In addition, the high biodegradability might be attributed to the existence of C–N bone-structure and more –COO–. Finally, Cu²⁺ could decrease the degradation percentage and the enzyme inhibition effect of Cu²⁺ was not the linear effect, but the “low-dosage effect”.     

树脂固载纳米铁对偶氮染料直接湖蓝5B的脱色性能研究

以FeSO4和NaBH4水溶液为前驱溶剂,以聚苯乙烯型阳离子交换树脂为载体,制备了树脂固载的纳米铁,室温下用于对偶氮染料直接湖蓝5B水溶液进行脱色研究。研究结果发现,脱色反应遵循准一级反应动力学,在初始pH为3~10的范围内,反应进行14 m in时,50 mg/L的染料溶液脱色率均能达到83%以上。固载的纳米铁材料可多次重复利用,溶液中释放的铁离子浓度不超过0.1 mg/L。     

Integrated energy management strategy of powertrain and cooling system for PHEV

ABSTRACT

Energy management strategy (EMS) is crucial in improving the fuel economy of plug-in hybrid electric vehicle (PHEV). Existing studies on EMS mostly manage powertrain and cooling system separately which cannot get the minimum total energy consumption. This paper aims to propose a novel EMS for a new type of dual-motor planetary-coupled PHEV, which considers cooling power demand and effect of temperature on fuel economy. Temperature-modified engine model, lithium-ion battery model, two motors, and cooling system models are established. Firstly, the separated EMS (S-EMS) is designed which manages powertrain and cooling system separately. Sequentially, after the analysis of thermal characteristics of the powertrain and cooling system, the thermal-based EMS (T-EMS) is then proposed to manage two systems coordinately. In T-EMS, cooling power demand and the charging/discharging energy of motors are calculated as equivalent fuel consumption and integrated into the object function. Besides, a fuzzy controller is also established to deicide the fuel-electricity equivalent factor with consideration of the effect of temperature and state of charge on powertrain efficiency. Finally, the hardware-in-loop experiment is carried out to validate the real-time effect of EMS under the New European Driving Cycle. The result shows that cooling power demand and temperature can significantly affect the fuel economy of the vehicle. T-EMS shows better performance in fuel economy than S-EMS. The equivalent fuel consumption of the cooling system of T-EMS decreases by 27% compared with that of S-EMS. The total equivalent fuel consumption over the entire trip of PHEV using T-EMS is reduced by 9.7%.     

城市老工业区土壤重金属污染状况与健康风险评价

本文对西部某老工业区土壤中As、Pb、Cr、Cd、Hg、Zn的含量、空间分布状况展开了研究,并依据《污染场地风险评估技术导则》对该老工业区的健康风险进行了评价。研究结果表明,该老工业区土壤重金属污染严重,6种元素与陕西土壤背景值相比超标100%,表明其不适宜作为居住用地开发。健康风险评价结果显示,As、Pb、Cr、Cd元素的非致癌风险值分别为3.83、1.7、1.94、1.09,均超过非致癌风险可接受值1,表明该老工业区对人们存在非致癌健康风险;对于致癌风险,As、Cr、Cd元素的致癌风险值远大于致癌风险边界值,分别超过致癌风险值的2个数量级(2.64×10-4)、4个数量级(1.94×10-2)、1个数量级(6.12×10-5),表示As和Cr已经达到了显著致癌风险的水平。     

Characteristics of molecular weight distribution of dissolved organic matter in bromide-containing water and disinfection by-product formation properties during treatment processes

The characteristics of dissolved organic matter (DOM) and bromide ion concentration have a significant influence on the formation of disinfection by-products (DBPs). In order to identify the main DBP precursors, DOM was divided into five fractions based on molecular weight (MW), trihalomethane formation potential and haloacetic acid formation potential were determined for fractions, and the change in contents of different fractions and total DBPs during treatment processes (pre-chlorination, coagulation, sand filtration, disinfection) were studied. Moreover, the relationship between bromide concentration and DBP generation characteristics in processes was also analyzed. The results showed that the main DBP precursors were the fraction with MW < 1 kDa and fraction with MW 3−10 kDa, and the DBP''s generation ability of lower molecular weight DOM (< 10 kDa) was higher than that of higher molecular weight DOM. During different processes, pre-chlorination and disinfection had limited effect on removing organics but could alter the MW distribution, and coagulation and filtration could effectively remove organics with higher MW. For DBPs, trihalomethanes (THMs) were mainly generated in pre-chlorination and disinfection, while haloacetic acids (HAAs) were mostly generated during pre-chlorination; coagulation and sand filtration had little effect on THMs but resulted in a slight removal of HAAs. In addition, the results of ANOVA tests suggested that molecular sizes and treatment processes have significant influence on DBP formation. With increasing bromide concentration, the brominated DBPs significantly increased, but the bromine incorporation factor in the processes was basically consistent at each concentration.     

新排放标准下燃煤电厂除尘工艺模糊综合评判

用模糊综合评判法对能满足新排放标准的几种较成熟的除尘工艺进行评价,选择环保、技术、经济3类指标构成除尘二级模糊评判的因素集。基于MATLAB软件,选用"add-product"算子进行计算。评价结果认为,新排放标准下新建燃煤电厂选择除尘工艺时,优先考虑高频电源电除尘器。     

铝型材碱洗废液再生工艺研究

针对铝型材表面处理工艺中产生大量碱洗废液,而且含有“长寿碱蚀剂”,提出了生石灰处理工艺。该工艺简单,效果好,铝去除率最高可达９７％,碱回收率可在８０％左右,可以实现工业化生产。同时,该法原料价格低廉易得,实现闭路循环,其副产品ＣａＣｌ２·２Ｈ２Ｏ,Ａｌ２(ＳＯ４)３·１８Ｈ２Ｏ和ＣａＳＯ４等均具有较高利用价值,可以达到良好的社会效益与经济效益