Enzymatic treatment of sanitary landfill leachate

The objective of this investigation was to study the effectiveness of applying enzymes (bioaugmentation) for enhancement of biological treatability of leachates generated in a typical municipal solid waste sanitary landfill. The basic purpose of enzyme use is to enforce the biodecomposition of organic constituents, as well as to reduce nitrogen content. A laboratory-scale sequencing batch (bio)reactor (SBR) was used for the examination of enzymatic application. The effect of different operation strategies on the efficiency of this biological treatment process was studied to optimize performance, especially for the removal of nitrogen compounds and of biodegradable organic matter. It was found that the enzymatic process was able to remove organic matter effectively (expressed as BOD5 and COD) and nitrogen content, color and turbidity.     

Persistent organic pollutants (POPs) in the conventional activated sludge treatment process: model predictions against experimental values

The FATE and treatibility estimator (FATE) model, developed by the United States Environmental Protection Agency was used for the prediction of the FATE of 26 persistent organic pollutants (POPs), i.e. 7 PCBs and 19 organochlorine compounds (OCs), during the conventional activated sludge treatment process applied in the waste water treatment plant (WWTP) of Thessaloniki, Greece. The removal rates predicted by the model for the primary and the secondary treatment stages were found to differ substantially from those experimentally measured. When the overall treatment was considered, the differences between measured and model predicted removals were within acceptable limits of confidence. Possible reasons that might cause deviations from experimental values were suggested to be the wastewater content in dissolved organic carbon (DOC), and/or the low concentrations of POPs in untreated wastewater.     

As(III) removal from groundwaters using fixed-bed upflow bioreactors

The application of biological oxidation of iron and manganese, as a potential treatment method for the removal of arsenic from contaminated groundwaters, was examined in this paper. This method was based on the growth of certain species of indigenous bacteria, which are capable of oxidizing the soluble iron and manganese ions; the oxidized forms can be subsequently removed from the aqueous stream by over 97%, through their transformation to insoluble oxides and separation by a suitable filter medium. Arsenic was removed by around 80%, under certain conditions, which were found to be sufficient for Fe(II) removal (dissolved oxygen 2.7 mg/l, redox 280-290 mV, pH 7.2, U 8.25 m/h). The specific treatment technique presents several advantages towards conventional physicochemical treatment methods, such as enhanced coagulation or direct adsorption since: (a) it does not require the addition of other chemicals for oxidizing and removing As(III), (b) it does not require close monitoring of a breakthrough point, as in conventional column adsorption processes and (c) it could find application for the removal of, at least, three groundwater contaminants (Fe, Mn, As).     

Sorption of As(V) ions by akaganéite-type nanocrystals

A priority pollution problem, the removal of arsenate oxyanions from dilute aqueous solutions by sorption onto synthetic akaganéite (beta-FeO(OH)) was the aim of the present study. This is an innovative inorganic adsorbent material prepared in the laboratory, following a new method of preparation. The effect of akaganéite and arsenate concentration, the contact time, temperature, solution pH value, and ionic strength variation on the treatment process was mainly investigated during this study. Typical adsorption isotherms were determined, which were found to fit sufficiently the typical Langmuir equation. The mechanism of sorption was examined by electrokinetic, X-ray diffraction, Fourier transmission infrared and scanning electron microscopy measurements. Promising results were obtained, due to the favourite characteristics of the adsorbent applied.     

Adsorption of fatty acids on fine mineral particles as a purification method of industrial wastewaters

The problem of fines disposal and utilization that has to be faced from most of the mineral processing plants, in relation with the removal of fatty acids (reagents that constitute usual anionic collectors and could be possibly found in flotation plant waters) led to the study of the adsorption of later on fine particles, being in this case magnesite and dolomite. Another main application of this work is in the separation of fines (at sub‐sieve size range) by flotation. Sodium oleate and a commercial tall oil fatty acid were selected in the present. Common parameters and their effect on adsorption were carefully looked at, including the pH of solution and concentration. The presence of modifying reagents (as sodium hexametaphosphate, pyrophosphate and carboxymethyl cellulose) was also examined.     

The application of novel coagulant reagent (polyaluminium silicate chloride) for the post-treatment of landfill leachates

Relatively "old" (stabilized) landfill leachates are a special category of wastewaters, which are difficult to treat further, mainly due to their bio-refractory organic content (humic substances). In this study, coagulation-flocculation was examined as post-treatment method for the biologically pre-treated stabilized leachates. The purpose was to examine the coagulation performance of alternative coagulant agents, i.e. the composite coagulant polyaluminium silicate chloride. Composite coagulants with different Al to Si molar ratio and different preparation methods were tested. Their efficiency was evaluated by monitoring from turbidity and phosphate content, other parameters strongly correlated with the presence of organic matter, such as UV absorbance at 254nm, COD and colour. The results suggest that the silica-based coagulants exhibit better coagulation performance, than the relevant conventional coagulant (alum) or simple pre-polymerized coagulants (PACl). Polyaluminium silicate chloride has greater tolerance against pH variation than alum or PACl, whereas this novel coagulant works better at pH values between 7 and 9. Coagulation-flocculation has proved to be an efficient post-treatment method for the biologically pre-treated leachates, promoting the removal of the refractory humic substances, while the treatment efficiency of coagulation can be improved by the application of the new coagulant agent.     

Theoretical assessment of phosphate amendments for stabilization of (Pb + Zn) in polluted soil

Contamination of the environment with toxic metals, such as lead (Pb), represents a serious concern for human health. Most of the studies on Pb stabilization were performed using various phosphorus-containing amendments that can reduce Pb mobility and bioavailability by the sorption and precipitation of new, stable pyromorphite-type minerals, presenting very low solubility and bioaccessibility. However, the presence of competing ions, such as zinc (Zn), can reduce stabilization efficacy. The role of chemical composition on the stability of immobilization products of Pb and Zn by the addition of hydroxyapatite (HAP) or fluoroapatite (FAP) has been examined in this paper. In this analysis we used a theoretical criterion which is based on calculation of the ion–ion interaction potential, representing the main term of the cohesive energy of the matrix/pollutant system. It has been demonstrated that the stability of the HAP matrix decreases and that the stability of the FAP matrix increases with the Pb immobilization in the presence of Zn. The results of this analysis point out FAP as an advantageous amendment for the immobilization of Pb in the presence of Zn.     

Coagulation-flocculation pretreatment of sanitary landfill leachates

Sanitary landfill leachates are considered as heavily polluted industrial wastewaters, presenting significant time and spatial variations of their physical-chemical parameters. Special care is required for their efficient treatment and disposal. The main aim of this work was to examine the application of coagulation-flocculation for the treatment of raw and partially stabilized leachates. Jar-test experiments were employed in order to determine the optimum conditions for the removal of organic matter and color, i.e. coagulant-flocculant combination, effective dosage and pH control. Ferric chloride, aluminium sulphate and lime were tested as conventional coagulants, whereas four commercial polyelectrolytes were co-examined: one anionic, two cationic and a non-ionic polymer. High chemical oxygen demand (COD) removal capacities (about 80%) were obtained during the addition of ferric chloride to the partially stabilized leachates, whereas low COD reductions (i.e. lower than 35%) were measured during the addition of coagulants in the raw samples. The addition of polyelectrolytes and pH adjustment in the alkaline region were found to affect slightly the removal of pollutants. The physico-chemical process may be used as a useful pretreatment step, especially for fresh leachates, prior to biological treatment, or as a post-treatment (polishing) step for partially stabilized leachates.     

The application of bioflocculant for the removal of humic acids from stabilized landfill leachates

The evaluation of bioflocculant, in comparison with traditional inorganic coagulants, for the removal of humic acids from landfill leachates stabilized by biological treatment, was performed using conventional jar-test coagulation experiments. The optimized conditions (pH and coagulant dosage) were identified for the treatment of synthetic solutions as well as for biologically pre-treated landfill leachates. It was found that the application of bioflocculant was quite efficient in the removal of humic acids from synthetic solutions as well as in the reduction of COD content from real landfill leachates. The optimal pH value was found to be between 7 and 7.5, while a 20 mg/l bioflocculant dosage was sufficient in providing more than 85% humic acid removal. The results were comparable with those obtained by the application of conventional coagulants such as alum or polyaluminum chloride; therefore, bioflocculant can be considered as a viable alternative in the treatment of landfill leachates applying coagulation.     

Application of flotation for the separation of metal-loaded zeolites

Several industrial wastewater streams may contain heavy metal ions, which must be effectively removed, before the discharge or reuse of treated waters could take place. Different bonding materials, presenting selectivity and fast reaction kinetics for the removal of metals, have been examined for this purpose. The objective of the present paper was to investigate the application of dispersed-air flotation for the separation of metal-loaded sorbents. Two similar zeolite samples were applied as effective bonding agents for the removal of zinc, a toxic metal commonly found in many industrial wastewaters. This combined process, termed sorptive flotation, involves the preliminary scavenging of metal ions, by using the appropriate sorbent particles (usually present as ultrafine particulates), followed by flotation for the effective separation of them. The obtained results were very promising, as both metal and sorbent were effectively removed/separated from the dispersion.