Airflow dispersion in unsaturated soil

Dispersion data is abundant for water flow in the saturated zone but is lacking for airflow in unsaturated soil. However, for remediation processes such as soil vapour extraction, characterization of airflow dispersion is necessary for improved modelling and prediction capabilities. Accordingly, gas-phase tracer experiments were conducted in five soils ranging from uniform sand to clay at air-dried and wetted conditions. The disturbed soils were placed in one-dimensional stainless steel columns, with sulfur hexafluoride used as the inert tracer. The tested interstitial velocities were typical of those present in the vicinity of a soil vapour extraction well, while wetting varied according to the water-holding capacity of the soils. Results gave dispersivities that varied between 0.42 and 2.6 cm, which are typical of values in the literature. In air-dried soils, dispersion was found to increase with the pore size variability of the soil. For wetted soils, particle shape was an important factor at low water contents, while at high water contents, the proportion of macroporous space filled with water was important. The relative importance of diffusion decreased with increasing interstitial velocity and water content and was, in general, found to be minor compared to mechanical mixing across all conditions studied.     

Estimating water content in an active landfill with the aid of GPR

Landfill gas (LFG) receives a great deal of attention due to both negative and positive environmental impacts, global warming and a green energy source, respectively. However, predicting the quantity of LFG generated at a given landfill, whether active or closed is difficult due to the heterogeneities present in waste, and the lack of accurate in situ waste parameters like water content. Accordingly, ground penetrating radar (GPR) was evaluated as a tool for estimating in situ water content. Due to the large degree of subsurface heterogeneity and the electrically conductive clay cap covering landfills, both of which affect the transmission of the electromagnetic pulses, there is much scepticism concerning the use of GPR to quantify in situ water content within a municipal landfill.Two landfills were studied. The first landfill was used to develop the measurement protocols, while the second landfill provided a means of confirming these protocols. GPR measurements were initially completed using the surface GPR approach, but the lack of success led to the use of borehole (BH) GPR. Both zero offset profiling (ZOP) and multiple offset gathers (MOG) modes were tried, with the results indicating that BH GPR using the ZOP mode is the most simple and efficient method to measure in situ water content. The best results were obtained at a separation distance of 2 m, where higher the water content, smaller the effective separation distance. However, an increase in water content did appear to increase the accuracy of the GPR measurements. For the effective separation distance of 2 m at both landfills, the difference between GPR and lab measured water contents were reasonable at 33.9% for the drier landfill and 18.1% for the wetter landfill. Infiltration experiments also showed the potential to measure small increases in water content.     

Current Near‐to‐Nature Forest Management Effects on Functional Trait Composition of Saproxylic Beetles in Beech Forests

With the aim of wood production with negligible negative effects on biodiversity and ecosystem processes, a silvicultural practice of selective logging with natural regeneration has been implemented in European beech forests (Fagus sylvatica) during the last decades. Despite this near‐to‐nature strategy, species richness of various taxa is lower in these forests than in unmanaged forests. To develop guidelines to minimize the fundamental weaknesses in the current practice, we linked functional traits of saproxylic beetle species to ecosystem characteristics. We used continental‐scale data from 8 European countries and regional‐scale data from a large forest in southern Germany and forest‐stand variables that represented a gradient of intensity of forest use to evaluate the effect of current near‐to‐nature management strategies on the functional diversity of saproxylic beetles. Forest‐stand variables did not have a statistically significant effect on overall functional diversity, but they did significantly affect community mean and diversity of single functional traits. As the amount of dead wood increased the composition of assemblages shifted toward dominance of larger species and species preferring dead wood of large diameter and in advanced stages of decay. The mean amount of dead wood across plots in which most species occurred was from 20 to 60 m³/ha. Species occurring in plots with mean dead wood >60 m³/ha were consistently those inhabiting dead wood of large diameter and in advanced stages of decay. On the basis of our results, to make current wood‐production practices in beech forests throughout Europe more conservation oriented (i.e., promoting biodiversity and ecosystem functioning), we recommend increasing the amount of dead wood to >20 m³/ha; not removing dead wood of large diameter (50 cm) and allowing more dead wood in advanced stages of decomposition to develop; and designating strict forest reserves, with their exceptionally high amounts of dead wood, that would serve as refuges for and sources of saproxylic habitat specialists. Efectos Actuales del Manejo Casi Natural de Bosques sobre la Composición de Atributos Funcionales de Escarabajos Saproxílicos en Bosques de Haya