Determination of heavy metals (Cd, Cr, Cu, Fe, Ni, Pb, Zn) by ICP-OES and their speciation in Algerian Mediterranean Sea sediments after a five-stage sequential extraction procedure

Surface sediment samples (n = 18) were collected from the Algerian Mediterranean coasts and analyzed for seven metals using inductively coupled plasma-optical emission spectrometry in order to asses the distribution and bioavailability of metals and to study the anthropogenic factors affecting their concentrations. Sediment samples were size-fractionated into three sizes: 1,080–500 (coarse), 500–250 (medium), and <250 mm (fine). Bulk sediments were subjected to both sequential extraction and total digestion to evaluate the reliability of the sequential extraction procedure (SEP), while the fractions have been only sequentially extracted for metals speciation. The metals were sequentially extracted into five phases namely exchangeable (P1), carbonates (P2), Fe–Mn oxides (P3), organic (P4) and residual (P5). Metal recoveries in sequential extractions were ±20% of the independently measured total metal concentrations; the high recovery rates indicate the good reliability of the SEP used in this study. Correlation coefficients indicated that the grain size has an effect on the distribution of metals in the investigated samples. The order of metal levels in the fractions was medium > fine > coarse for all the metals. The average total extractable metal concentrations for Cd, Cr, Cu, Fe, Ni, Pb, and Zn were 1.1, 8.8, 4.7, 1,291.3, 13.9, 5.7 and 20.4 μg/g, respectively. The northeastern shelf had the lowest metal levels while the highest were in northwestern part mainly due to the significant tourism activities in the northwestern part. Comparison of our results to Earth’s crust values and to previous studies points out that our samples were relatively unpolluted with respect to the heavy metals investigated; most of the metals are not from anthropogenic sources. Enrichment factors as the criteria for examining the impact of the anthropogenic sources of heavy metals were calculated, and it was observed that the investigated samples were not contaminated with Cr, Cu, and Fe, moderately contaminated with Ni, Pb, and Cd, and contaminated with Cd in some sites. The P5 phase had the highest percents of Cr, Cu, Fe, Ni, and Zn. Cadmium and lead were predominant in the P4 phase, while Cu, Fe and Zn were distributed in the order P5 > P3 > P4 > P2 > P1. The following order of bioavailability was found with the heavy metals Pb > Cr > Cd > Ni > Zn > Cu > Fe.     

Determination of trace metals in drinking water in Irbid City-Northern Jordan

Drinking water samples from Irbid, the second populated city in Jordan were analyzed for trace metals (As, Ba, Cd, Pb, Cr, Cu, Fe, Zn, Mn, Ni, and Se) content. The study was undertaken to determine if the metal concentrations were within the national and international guidelines. A total of 90 drinking water samples were collected from Al-Yarmouk University area. The samples were collected from three different water types: tap water (TW), home-purified water (HPW), and plant-purified water (PPW). All the samples were analyzed for trace metals using an inductively coupled plasma-optical emission spectrometry. All the samples analyzed were within the United States Environmental Protection Agency admissible pH limit (6.5–8.5). The results showed that concentrations of the trace metals vary significantly between the three drinking water types. The results showed that HPW samples have the lowest level of trace metals and the concentrations of some essential trace metals in these samples are less than the recommended amounts. Slight differences in the metal contents were found between HPW samples, little differences between PPW samples; however, significant differences were found between TW samples. Although some TW samples showed high levels of trace metals, however, the mean level of most elements determined in the samples were well within the Jordanian standards as well as the World Health Organization standards for drinking water.     

Levels of lead, cadmium, copper, iron, and zinc in deciduous teeth of children living in Irbid, Jordan by ICP-OES: some factors affecting their concentrations

The aim of this study was to measure the concentrations of lead (Pb), cadmium (Cd), copper (Cu), iron (Fe), and zinc (Zn) in deciduous teeth from children living in Jordan and to investigate the affecting factors. Deciduous teeth samples (n?=?320, without fillings) were collected from 5- to 12-year-old children and analyzed for Pb, Cd, Cu, Fe, and Zn using inductively coupled plasma–optical emission spectrometry. A questionnaire was used to gather information on each child, such as sex, age, tooth type (incisors, canines, and molars), tooth position within the mouth (upper or lower jaw), caries status, presence of amalgam fillings inside the mouth, type of drinking water (tap water, home purified water, and plant purified water), and zone of residence (close to or far from heavy traffic roads). The mean concentrations of Pb, Cd, Cu, Fe, and Zn were 30.26, 0.55, 6.23, 34.72, and 128.21 μg/g, respectively. Our results indicate that there is a clear relation between the concentrations of the metals analyzed in this study and tooth type, tooth position within the mouth, caries status, presence of amalgam fillings inside the mouth, and type of drinking water. No significant differences in the concentrations of the five metals analyzed were observed due to sex. Our results also show that no significant difference among Pb, Cd, Cu, Fe, and Zn concentrations and age among the ages of 5–6, 7–8, 9–10, and 11–12, except for Pb, which decreases at age 11–12.     

Harvesting of microalgae biomass from the phycoremediation process of greywater

The wide application of microalgae in the field of wastewater treatment and bioenergy source has improved research studies in the past years. Microalgae represent a good source of biomass and bio-products which are used in different medical and industrial activities, among them the production of high-valued products and biofuels. The present review focused on greywater treatment through the application of phycoremediation technique with microalgae and presented recent advances in technologies used for harvesting the microalgae biomass. The advantages and disadvantages of each method are discussed. The microbiological aspects of production, harvesting and utilization of microalgae biomass are viewed.     

Atmospheric deposition of major and trace elements in Amman, Jordan

Wet and dry deposition samples were collected in the capital of Jordan, Amman. Concentrations of Al, Ba, Bi, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, V, Zn, Fe, Sr, Mg²⁺, Ca²⁺, Na⁺, K⁺, Cl⁻, NO₃ ⁻ and SO₄ ²⁻, along with pH were determined in collected samples. Mean trace metal concentrations were similar or less than those reported for other urban regions worldwide, while concentrations of Ca²⁺ and SO₄ ²⁻ were among the highest. High Ca²⁺ concentrations were attributed to the calcareous nature of the local soil and to the influence of the Saharan dust. However, high SO₄ ²⁻ concentrations were attributed to the influence of both anthropogenic and natural sources. Except for Cl⁻, NO₃ ⁻, SO₄ ²⁻ and Cu, monthly dry deposition fluxes of all measured species were higher than wet deposition fluxes. The annual wet deposition fluxes of trace metals were much lower than those reported for other urban areas worldwide.     

Pb in medicinal plants from Jordan

This is the first report on Pb in medicinal herbs from Jordan. Medicinal herbs may present a health risk due to the presence of toxic metals. Seventy-nine dry medicinal plant samples were collected from herbalist shops in Jordan. The plants were digested with acids and analyzed for total Pb concentration using atomic absorption spectrometry. Mean Pb concentration was 15.9 μg/g on a dry weight basis. Our results show that Pb concentrations in Jordan medicinal plants are higher than published data in other countries. The highest level of 33.4 μg Pb/g was determined in Inula viscosa, and the lowest level of 3.0 μg Pb/g was found in Nigella sativa. Calculated daily intakes of Pb of most analyzed herbs were high; most of them are higher than recommended values by the world health organization (WHO). Fortunately, the herbs that contain the highest Pb levels are the less commonly used medicinal herbs in Jordan. The mean Pb levels in the most commonly, commonly and less commonly used herbs in Jordan are 13.9, 13.1 and 16.9 μg Pb/g, respectively. The average dietary intake of Pb through a mixture of these medicinal herbs consumption, assuming 5.0 g herbs is consumed daily, is 79.5 μg Pb/day, which is higher than the maximum daily limit allowed by WHO. We conclude that most of the medicinal plants consumed in Jordan contain significant amount of Pb, and therefore, people of Jordan should not consume large amounts of these herbs.