Analysis of BTEX and other substituted benzenes in water using headspace SPME-GC-FID: method validation

The analysis of BTEX and other substituted benzenes in water samples using solid phase microextraction (SPME) and quantification by gas chromatography with flame ionization detection (GC-FID) was validated. The best analytical conditions were obtained using PDMS/DVB/CAR fibre using headspace extraction (HS-SPME) at 50 [degree]C for 20 min without stirring. The linear range for each compound by HS-SPME with GC/FID was defined. The detection limits for these compounds obtained with PDMS/DVB/CAR fibre and GC/FID were: benzene (15 ng L(-1)), toluene (160 ng L(-1)), monochlorobenzene (54 ng L(-1)), ethylbenzene (32 ng L(-1)), m-xylene (56 ng L(-1)), p-xylene (69 ng L(-1)), styrene (35 ng L(-1)), o-xylene (42 ng L(-1)), m-dichlorobenzene (180 ng L(-1)), p-dichlorobenzene (230 ng L(-1)), o-dichlorobenzene (250 ng L(-1)) and trichlorobenzene (260 ng L(-1)). This headspace SPME-GC-FID method was compared with a previously validated method of analysis using closed-loop-stripping analysis (CLSA). The headspace SPME-GC-FID method is suitable for monitoring the production and distribution of potable water and was used, in field trials, for the analysis of samples from main intakes of water (surface or underground) and from the water supply system of a large area (Lisbon and neighbouring municipalities).     

Hybridization between wheat (Triticum aestivum) and the wild species Aegilops geniculata and A. biuncialis under experimental field conditions

Hybridization between Aegilops geniculata, A. biuncialis and bread wheat Triticum aestivum has been evaluated during two seasons under simulated field conditions to estimate the field hybridization rate under Central Spain conditions. The mean frequencies of hybridization between A. biuncialis and A. geniculata with wheat were 0.34% and 0.31%, respectively. Data from 10 hybrid plants for each combination showed that hybrids can be partially fertile by backcrossing with wheat parent, with percent averages of 3.17 grains/spikelets for A. biuncialis × wheat hybrids and 2.87 grains/spikelets for A. geniculata × wheat hybrids. Self-pollination, although at very low rates, was also possible in hybrids. The potential risks associated with natural hybridization in the context of transgenic wheat cultivation are discussed.     

Transabdominal chorionic villus sampling: Analysis of 350 consecutive cases

We report a series of 350 patients submitted to transabdominal chorionic villus sampling (CVS). A technique using two ultrasound-guided needles and a suction pump was used. In most cases, the procedure was performed between 9 and 13 weeks. Twenty-one pregnancies were selectively terminated; nine spontaneous abortions followed the procedure and one fetal loss after 28 weeks was recorded; 153 pregnancies are in progress and 169 delivered fetuses are alive and well. Transabdominal biopsy is a feasible and effective technique for CVS.     

Synthesis of poly(hydroxyalkanoate) from hydrolyzed linseed oil

Pseudomonas putida was grown on a mixture of long-chain fatty acids obtained by hydrolysis of linseed oil. A poly(3-hydroxyalkanoate) containing 51.2% of unsaturated monomers was obtained. A considerable percentage (13.6%) was constituted by C₁₄ and C₁₆ monomers containing three double-bonds in the side chains. The polymer showed a high tendency to crosslink when it was kept in presence of air. In the crosslinked polymer no polyunsaturated monomers could be detected.     

Effect of Si-rich substances on phosphorous adsorption by sandy soils

Environmental Science and Pollution Research - The poor adsorption capacity of sandy soils is one of the primary reasons of a high level of phosphorus (P) leaching. Silicon (Si)-rich soil...     

Selective collection as a pretreatment for indirect solid recovered fuel generation

Effective selective collection (SC) has been increasing in many countries of the European Union. As a consequence the composition of residual municipal solid waste (RMSW) is changing not only because of economic development, but also due to the collection system. The input of RMSW treatment plants is thus not homogeneous. This paper analyses two case studies involving a total of five SC scenarios and their impact on the generation of solid recovered fuel (SRF) with/without bio-drying, post-treatment and packaging take back programs (TBPs). These case studies are based on two types of SC: kerbside and drop-off. The latest regulation on SRF classification is taken into account: energy content, Cl and Hg concentrations are assessed and discussed. The role of the respirometric index (RI) is also analyzed. Results show that when SC is highly efficient RMSW can be classified directly as SRF, but only if the introduction of RI does not set stringent respirometric targets. The role of packaging TBPs is important as the residual waste remaining after the packaging has been processed, can be valorized increasing the lower heating value (LHV) of the residual RMSW and minimizing the streams that should be landfilled. The source separation of food waste has a significant impact on the suitability of bio-drying: when the SC of food waste is very efficient, its percentage in the RMSW may be too low for effective bio-drying.     

Bacterial toxicity testing and antibacterial activity of parabens

Parabens are used because of their antimicrobial effects, yet they have multiple adverse effects. The aim of this work was to evaluate the bactericidal activity and bacterial toxicity of the most common parabens: methylparaben, ethylparaben, propylparaben, isopropylparaben, butylparaben, isobutylparaben and phenylparaben. The bactericidal action was evaluated by means of the dilution-neutralization method against Escherichia coli and Staphylococcus aureus, and the biotest of inhibition of growth of E. coli was applied for the bacterial toxicity assay. Bactericidal concentrations were reached only for propylparaben, butylparaben and isobutylparaben. The toxicity study showed methylparaben to be the least toxic, whereas the most toxic one was phenylparaben. It can be concluded that the disinfectant activity of the parabens studied is insignificant against S. aureus and E. coli. Acute toxicity is very low, and the inhibitory effect is weak. Our results provide information about the risk–benefit balance of parabens use.     

At home and abroad: An empirical analysis of innovation and diffusion in energy technologies

This paper contributes to the induced innovation literature by extending the analysis of supply and demand determinants of innovation in energy technologies to account for international knowledge flows and spillovers. We select a sample of 38 innovating countries and study how knowledge related to energy-efficient and environmentally friendly technologies flows across geographical and technological space. We demonstrate that higher geographical and technological distances are associated with lower probabilities of knowledge flow. Next, we use previous estimates to construct internal and external knowledge stocks for a panel of 17 countries. We then present an econometric analysis of the supply and demand determinants of innovation accounting for international knowledge spillovers. Our results confirm the role of demand-pull effects, proxied by energy prices, and of technological opportunity, proxied by the knowledge stocks. Our results show that spillovers between countries have a significant positive impact on further innovation in energy-efficient and environmentally friendly technologies.