Multivariate assessment of outflow water quality in highly urbanized creek system: implication of natural and anthropogenic processes

Environmental Science and Pollution Research - Nutrient source and transport study in tropical creeks adjacent to megacities are sparse on a regional and global scale. High-frequency chemical data...     

Review: recent advances in biogas purifying technologies

Biomethane production through biogas upgrading is a promising renewable energy for some industries which could be part of the equilibrium needed with fossil fuels consumption to achieve a sustainable society. This paper presents a comprehensive list of biogas upgrading technologies focused on carbon dioxide removal as well as recent advances reported by researcher with wide expertise in this topic. Additionally, an extensive costs–performance comparison among the technologies studied is discussed. Among the different alternatives, chemical scrubbing stood out to achieve high biomethane purities while cryogenic technologies proved to be effective against methane losses. Regarding the different costs, water scrubbing and membrane separation seem to be the most affordable techniques.     

Competitive Retention of Lead and Cadmium on an Agricultural Soil

Lead and cadmium contamination of an agricultural soil has been studied using batch and column experiments. Thermodynamics of theretention phenomena may be represented by a Langmuir isotherm foran aqueous metal concentration up to 100 mg L^-1. First order kinetics with respect to the solid phase yield good predictabilityfor both batch and column experiments. Kinetics and thermodynamics of lead retention predominate over those ofcadmium. As a consequence, lead is preferentially retainedand can even displace sorbed cadmium. In the event of anspill involving both metals, cadmium would move further inthe soil and its aqueous concentration downstream could beeven higher than that of the influent solution, increasingpotential risks. A two-region model has been used to fit all the experimental results. Satisfactory predictions for column experiments are obtained with parameters which are consistent with those obtained for the batch experiments, for which sorption is described by a Langmuir isotherm including competitive retention.     

Determination of pollution trends in an abandoned mining site by application of a multivariate statistical analysis to heavy metals fractionation using SM&T-SES

The mobility, availability and persistence of Heavy Metals (HMs), As, Cd, Cu, Ni, Pb and Zn, in contaminated soils of a former abandoned mining area were evaluated by means of a sequential extraction scheme (SES) and applying a multivariate statistical analysis to the obtained data. Chemical partitioning of HMs in each sample was determined in four fractions (acid-soluble, reducible, oxidable and residual) following the Standard Measurements and Testing (SM&T) SES, formerly BCR-SES. Statistical evaluation of results by pattern recognition techniques allowed identification of groups of samples with similar characteristics and observations of correlations between variables, determining the pollution trends and distribution of HMs within the studied area. Typical metal-fraction association and metal availability characteristics of heavy metals have been depicted. The obtained results indicate an urgent need to attenuate the hazard in that area posed by high concentrations of toxic metals, which exceed the limits specified by different European legislations on soil reclamation.     

Pollen allergy related to the area of residence in the city of Córdoba,south-west Spain

The aim of this study was to analyse the relationship between the distribution of hay-fever patients in the city of Córdoba, south-western Iberian Peninsula, and the specific atmospheric biological content originating from local sources. Four different districts were established in the metropolitan area of the city, according to vegetational and urbanistic characteristics. Air samples were taken in each area using portable Hirst-type samplers (Lanzoni VPPS 1000) and the spectrum of biological content was defined. Patients attending the Allergy Unit at Córdoba Teaching Hospital in 2000 with allergic rhinitis and/or asthma, and displaying a positive reaction to aeroallergen extracts, were distributed within the areas as a function of their district of residence. Aerobiological results revealed differences in pollen content between areas, in terms of both quantity and number of pollen types recorded. These differences were largely due to proximity to rural areas, prevalence of pollen from typically urban species and the possible effect of urban architecture as a barrier to the dispersal/ concentration of particles and other pollutants. Patients were not uniformly distributed within the city. The majority lived in districts in which pollen from rural species was mixed with pollen from ornamentals. Patients living in typically urban districts displayed a higher prevalence of allergy to pollen from ornamentals. It is concluded that a high degree of exposure to the same environment may influence the development of sensitisation to the particular pollen load associated with that area.     

Assessment of the Heavy Metal Pollution Effects on the Soil Respiration in the Baix Llobregat (Catalonia, NE Spain)

A main goal of investigations is to determine could a soilrespiration be an indicator of the soil pollution. In this case a measured levelof the soil oxygen consumption depends of its pollution. It alsomeans that the pollution reduces biological processes in edaphon.Investigated soil samples were taken from polluted andnon-polluted places in the Baix Llobregat near Barcelona (Catalonia, NE Spain). Soil samples were taken from the top ofsoil (0–5 cm) without a litter. Soil analysis were done, determining percentage shares of coarsefragments, coarse sand, fine sand, coarse silt, fine silt, clay,CaCO₃, organic matter as well as water pH and conductivityCE (1:5 [mS cm^-1]). Also were determined (in mg kg^-1)quantities of heavy metals, as Fe, Al, Mn, Zn, Cr, Ni, V, Cu, Cd, Pb.The soil respiration was investigated in temperatures15 and 30 °C and with controlled humidity.The respiration in 30 °C is number of times greater thenin 15 °C both for polluted and non-polluted soils.Particularly high coefficients of correlation between the soilrespiration and soil pollution in polluted soils were obtainedfor Pb: r = 0.75 in 15 °C and r = 0.98 in30 °C; for Ba: 0.90 and 0.57; for V: 0.99 and 0.81. In non-polluted soils highest correlation coefficients are for Pb: r = 0.70 in 15 °C; Fe: 0.60 and 0.72; Al: 0.68 and0.64; Mn: 0.51 and 0.66; Ba: 0.63 and 0.61; Cr: 0.94 and0.70; Ni: 0.64 and 0.65; Cu: 0.69 and 0.48; as well as V: 0.62in 15 °C; and Cd: 0.69 in 15 °C.This way the soil respiration could be a good indicator of the soil pollution.     

Scope of fossil energy resources in Mexico and the Andean Group

The article focuses on fossil energy resources in the Andean Group and Mexico, and argues for a dynamic approach to calculating reserves to production ratios. Individual countries are surveyed in terms of estimated reserves of fossil energy resources, current production rates and future prospects; energy policy options for individual countries are analysed. As a primary objective of energy policy is to ensure security of supply, it is important that calculations of reserves to production ratios accurately estimate the desired level of investment in exploration. The calculations need to take into account a variety of parameters, including different energy sources, availability and risk; geographic considerations including proximity, transport, storage capacity and commercial aspects; the competitive and environmental implications of developing indigenous resources; and the use of instruments to establish contingency plans for emergencies.
The opinions expressed in this article are those of the authors, and do not necessarily reflect the views of OLADE, ECLAC or GTZ. The authors apologize for any inaccuracies or omissions in the article.     

In-situ sparging: Mass transfer mechanisms

In-situ sparging has been accepted as a method to rapidly remediate groundwater at considerably lower costs compared to remedies based on groundwater recovery alone. The success of in-situ sparging depends on effective mass transfer between air and contaminated media in the subsurface. Factors affecting mass transfer include advective airflow, diffusive transport, interphase chemical partitioning, and chemical and biological reaction rates between sparged gases and subsurface contaminants, minerals, and naturally occurring organic compounds. Understanding these factors can increase the design efficiency of in-situ sparging and assist in developing sparging systems that use gases other than air (i.e., oxygen, ozone, and methane).     

Steady-state analyses for reactive distillation control: An MTBE case study

An approach, based purely on steady-state analyses, for synthesizing effective control structures for reactive distillation (RD) columns is presented. The main idea is to analyze the steady-state relationships between the manipulated (input) variables and the potential controlled (output) variables to identify input–output (IO) pairings that are sensitive and avoid steady-state multiplicities providing a large range of nearly linear operating region around the base case design. Traditional SISO control loops are then implemented using these IO pairings to obtain control structures that maintain the column near the design product purity and conversion for the anticipated primary disturbances. The Niederlinski Index is used to eliminate dynamically unstable pairings in control structures with multiple loops. The approach is demonstrated on an example MTBE RD column. The impact of steady-state multiplicities on control structure design is highlighted.