Application of polyamide thin-film composite layered on polysulfone-GO/TiO2 mixed matrix membranes for removal of nitrotoluene derivatives from petrochemical wastewaters

Release of harmful organic intermediates or byproducts during the manufacture of petrochemical compounds is a serious problem in petrochemical plants. In this work, polysulfone membranes blended with GO/TiO₂ nanocomposite were synthesized by phase inversion method and coated with a polyamide layer formed by interfacial polymerization to prepare a thin-film composite (TFC) sample. Analysis and characterization of the sample were carried out by XRD, FE-SEM, BET, FTIR/ATR, AFM, TGA, and zeta potential. Results indicated that incorporation of GO/TiO₂ into the membrane structure enhanced porosity, surface roughness, and macrovoid formation along the cross-section of the sublayer and permeability of the membrane. The TFC membranes were applied to remove mononitrotoluene (MNT) and dinitrotoluene (DNT) as the basic intermediates of toluene diisocyanate (TDI). The membranes demonstrated high efficiency (>?90%) for the removal of MNT and DNT according to the charge exclusion mechanism and Donnan effect. Application of the TFC membrane for treatment of wastewater in the TDI plant showed that the removal of pollutants is variable in the range of 45–65% and 53–69% for the membrane with the highest flux and highest rejection in different transmembrane pressure, respectively.

     

Influence of sub-lethal crude oil concentration on growth,water relations and photosynthetic capacity of maize (Zea mays L.) plants

Environmental Science and Pollution Research - Maize tolerance potential to oil pollution was assessed by growing Zea mays in soil contaminated with varying levels of crude oil (0, 2.5 and...     

A simplified model for reservoir operation considering the water quality issues: Application of the Young conflict resolution theory

In this study, an algorithm combining a multi-objective genetic algorithm (GA)-based optimization model and a water quality simulation model is developed for determining a trade-off curve between objectives related to the allocated water quantity and quality. To reduce the run-time of the GA-based optimization model, the main problem is decomposed to long-term and annual optimization models. The reliability of water supply is considered to be the objective function in the long-term stochastic optimization model, but the objective functions of the annual models are related to both the allocated water quantity and quality. The operating policies obtained using this long-term model provide the time series of the optimum reservoir water storages at the beginning and the end of each water year. In the next step, these optimal reservoir storage values are considered as constraints for water storage in the annual reservoir operation optimization models. The epsilon-constraint method is then used to develop a trade-off curve between the reliability of water supply and the average allocated water quality. The Young conflict resolution theory, which incorporates the existing conflicts among decision-makers and stakeholders, is used for selecting the best solution on the trade-off curve. The monthly reservoir operating rules are then calculated using an Adaptive Neuro-Fuzzy Inference System, which is trained using the optimal operating policies. The proposed model is applied to the 15-Khordad Reservoir in the central part of Iran. The results show that this simplified procedure does not reduce the accuracy of the reservoir operating policies and it can effectively reduce the computational burden of the previously developed models.     

Optimal redesign of groundwater quality monitoring networks: a case study

Assessment and redesign of water quality monitoring networks is an important task in water quality management. This paper presents a new methodology for optimal redesign of groundwater quality monitoring networks. The measure of transinformation in discrete entropy theory and the transinformation–distance (T–D) curves are used to quantify the efficiency of sampling locations and sampling frequencies in a monitoring network. The existing uncertainties in the T–D curves are taken in to account using the fuzzy set theory. The C-means clustering method is also used to classify the study area to some homogenous zones. The fuzzy T–D curve of the zones is then used in a multi-objective hybrid genetic algorithm-based optimization model. The proposed methodology is utilized for optimal redesign of monitoring network of the Tehran aquifer in the Tehran metropolitan area, Iran.     

Assessment of heavy metal enrichment in the offshore fine-grained sediments of the Caspian Sea

Sampling of the offshore seabed sediments of southwestern part of the Caspian Sea was carried out by gravity corer in order to study heavy metal concentration and the physicochemical factors controlling their distribution in the fine-grained fraction. The grain size distribution, amount, and type of clay minerals, total organic carbon (TOC) content, and Eh–pH of the sediments were determined. The average concentrations of the heavy metals in ppm are Mn (563), Cu (207.5), Sr (187), Zn (94), Pb (26.3), Ni (14.5), Co (11.5), Cd (2.56), and Ag (1.04) in their order of abundances. Co and Zn mostly indicate increase in silt-size fraction of the sediments suggesting their probable detrital provenance but the Mn, Ni, Cu, Sr, Pb, Cd, and Ag concentrations show a similar trend to distribution of the clay-size fraction. The concentrations of Mn, Co, and Cd increase with increase in the TOC content but the Cu, Pb, Ni, Ag, and Sr concentrations decrease with increase of the TOC content. The amounts of Zn, Cu, Sr, Pb, Cd, and Ag increase with increase in the CaCO₃ content. The calculated enrichment factor indicates that the sediments are very strong to extremely enriched in Ag, significantly enriched in Cu and Cd, and depleted to mineral for Pb, Sr, Co, Ni, and Zn. Variations of the Cu, Sr, Cd, Ag, and Pb concentrations are similar to the clay and CaCO₃ distributions.     

Fuzzy Possibilistic Modeling for Closed Loop Recycling Collection Networks

Nowadays, in the competitive market, commercial companies due to their economic problems and also restrictions imposed by international organizations to comply with environmental regulations are making noticeable efforts to reduce the level of their wastes in their manufacturing systems and consequently the level of waste in consumers’ products. In harmony with this issue, one of the most effective ways which has successfully been used and proven to be economically profitable is to take products lifecycles into consideration. Consideration of products lifecycle has made supply chain practitioners to investigate the reverse logistics activities in addition to forward logistics activities. Hence, corporations, in order to reduce their cost on the one hand and boosting their efficiency on the other hand, were obligated to employ closed loop supply chain models to concurrently benefit from its economical and environmental advantages. Therefore, in this paper, a mixed nonlinear facility location–allocation model is proposed for recycling collection centers. The considered closed loop logistics model consists of multiple echelons, multiple suppliers, multiple collection centers, multiple time period and also multiple facilities. In real-life problems parameters like demand, cost, capacity, distances, and quantities of returned products are always uncertain. Therefore, in order to solve a realistic problem, foregoing parameters are considered as fuzzy in our proposed model. Subsequently, to solve fuzzy mixed nonlinear programming model, one of the most effective technique in the literature is used. Additionally, in order to demonstrate the behavior of the parameters employed in the model, a comprehensive sensitivity analysis is conducted. Computational results demonstrate that the proposed model can show favorable efficiency in solving supply chain problems.     

Visitor impact on rocky shore communities of Qeshm Island, the Persian Gulf, Iran

The influence of visitors on macroinvertebrates of rocky intertidal shores was investigated in southern coasts of the Qeshm Island, the Persian Gulf, Iran. Qeshm Island located at the Strait of Hormuz, with an area of 1,491 km², is the largest island in the region. This island consists of a number of important natural habitat types including creeks, mangroves, corals, and sandy, muddy, and rocky shores that accommodate diverse marine flora and fauna communities. Two rocky shores were selected at the touristic beaches being visited regularly, and further two control locations selected at pristine shores. Intertidal macroinvertebrates were collected from six microhabitats including rock platforms, cobbles, boulders, crevices, sea walls, and rock pools during two different periods representing high and low tourist seasons. Species richness, density, and assemblage structure in heavily visited shores were compared with that of control locations. Striped barnacles (Balanus amphitrite) were present on platforms of all locations, thus the changes in their size were used as the obvious contrast associated with visitor’s impact. A total of 70 macroinvertebrate species from 11 phyla were recorded. Significant differences were detected in taxonomic richness, density, and assemblage structure of macroinvertebrates between heavily visited and pristine shores, suggesting that macroinvertebrates were adversely affected by visitors’ impact at heavily visited shores. The test of changes in species richness, density, and assemblage structure from high to low seasons yielded mixed results. The significant changes in density and assemblage structure from high to low seasons were only observed in one heavily visited shore. A significant reduction in size of striped barnacles was observed only in one heavily visited shore. The opportunistic or fugitive species (e.g., small macroalgae and barnacles) were dominant macroinvertebrates on heavily visited shores indicating early succession stage. The results presented here showed that macroinvertebrates were adversely affected by human activities in subtropical rocky shore.     

Performance of Cow Dung Reinforced Biodegradable Poly(Lactic Acid) Biocomposites for Structural Applications

In this work, performance of cow dung (CD) reinforced poly(lactic acid) (PLA) biocomposites was investigated for the potential use in load bearing application. CD of average 4 mm size was blended with PLA at different CD ratios (0–50 wt%) and their effects on the biocomposite properties were studied. The results showed an improvement in the flexural properties, while the tensile and impact strength dropped by 20 and 28% with the addition of 50% CD. The decline in the tensile and impact strength was due to micro-cracking and voids formation at higher CD content. Also, the incorporation of CD slightly decreased the thermal stability of the biocomposite. However, dynamic mechanical properties of the biocomposites generally improved. SEM analysis of tensile and impact fractured surfaces indicated that the CD had a reasonable adhesion with matrix. Moreover, the SEM micrographs of soil burial studies showed an accelerated degradation of higher CD wt% biocomposites.     

Electro-Fenton pretreatment for the improvement of tylosin biodegradability

The feasibility of an electro-Fenton process to treat tylosin (TYL), a non-biodegradable antibiotic, was examined in a discontinuous electrochemical cell with divided cathodic and anodic compartments. Only 15 min electrolysis was needed for total tylosin degradation using a carbon felt cathode and a platinum anode; while 6 h electrolysis was needed to achieve high oxidation and mineralization yields, 96 and 88 % respectively. Biodegradability improvement was shown since BOD₅/COD increased from 0 initially to 0.6 after 6 h electrolysis (for 100 mg L^?1 initial TYL). With the aim of combining electro-Fenton with a biological treatment, an oxidation time in the range 2 to 4 h has been however considered. Results of AOS (average oxidation state) and COD/TOC suggested that the pretreatment could be stopped after 2 h rather than 4 h; while in the same time, the increase of biodegradability between 2 and 4 h suggested that this latter duration seemed more appropriate. In order to conclude, biological cultures have been therefore carried out for various electrolysis times. TYL solutions electrolyzed during 2 and 4 h were then treated with activated sludge during 25 days, showing 57 and 67 % total organic carbon (TOC) removal, respectively, namely 77 and 88 % overall TOC removal if both processes were considered. Activated sludge cultures appeared, therefore, in agreement with the assessment made from the analysis of physico-chemical parameters (AOS and COD/TOC), since the gain in terms of mineralization expected from increasing electrolysis duration appeared too low to balance the additional energy consumption.