Phosphorus leaching in sandy outwash soils following potato-processing wastewater application

Land application of wastewater presents potential for ground water pollution if not properly managed. In situ breakthrough tests were conducted using potato (Solanum tuberosum L.)-processing wastewater and a Br tracer to characterize P leaching in seasonally frozen sandy outwash soils. In the first test, P and Br breakthrough were measured in a 7-m deep well following wastewater [2.94 mg L(-1) total P (TP); 280 mg L(-1) Br] application at the site that had 13.1 mg water-extractable P (WEP) kg(-1)and 94.4 mg Bray-1 P kg(-1). Bromide was detected in the well after approximately 0.4 pore volumes, but there was no P break-through after 7 pore volumes. In the second breakthrough test, wastewater containing 3.6 mg L(-1) TP and 259 mg L(-1) Br was applied on 1.5-m deep lysimeters at low (0.8 mg WEP kg(-1); 12.1 mg Bray-1 P kg(-1)) and high soil test P sites (104 mg WEP kg(-1); 585 mg Bray-1 P kg(-1)). Leachate TP concentration during the test remained constant (0.04 mg L(-1)) at the low P sites but increased from approximately 3.5 to 5.6 mg L(-1) at the high P sites. These results indicate no P leaching in low P soils, but leaching in high P soils, thus suggesting that most of the P leached at the high P sites was mainly due to desorption and dissolution of weakly adsorbed P from prior P applications. This was consistent with P transport simulations using the convective-dispersive equation. We conclude that P concentration in land-applied wastewater should be regulated based on soil test-P level plus wastewater P loading.     

Subsurface nutrient modelling using finite element model under Boro rice cropping system

Boro rice, an emerging low-risk crop variety of rice, cultivated using residual or stored water after Kharif season. To enhance the quality and production of rice, potassium (K) and phosphorus (P) are the common constituents of agricultural fertilizers. However, excess application of fertilizers causes leaching of nutrients and contaminates the groundwater system. Therefore, assessment and optimization of fertilizer dose are needed for better management of fertilizers. Towards this, the present study determines the path, persistence, and mobility of K and P under the Boro rice cropping system. The experimental site consisted of four plots having Boro rice with four different fertilizer doses of nitrogen (N), P, K viz. 100%, 75%, 50%, and 25% of the recommended dose. Disturbed soil samples were analysed for K and P from pre-sown land to tillering stage at 0–5, 5–10, 10–15, 15–30, 30–45, and 45–60 cm depths. Simultaneously, K and available P were also simulated in the subsurface soil layers through the HYDRUS-1D model. The statistical comparisons were made with RMSER, E, and PBIAS between the modelled values and laboratory-measured values. Although, the results showed that all the treatments considered had agreeable simulations for both K and P, the K simulations were found to be better as compared to P simulations except for 25% where P simulations outperformed K. The simulated concentration at all doses was found most appropriate when measured for the subsurface layers (up to 45 cm), while showed an underestimation in the bottom layers (45–60 cm) of soil.

     

Performance evaluation of dolomite production waste in development of sustainable concrete: hardened properties and ecological assessment

Journal of Material Cycles and Waste Management - Dolomite production waste is a by-product generated by dolomite mining, causing environmental pollution and other associated issues worldwide. In...     

Design parameters for fixed bed reactors of activated carbon developed from fertilizer waste for the removal of some heavy metal ions

Activated carbon, developed from fertilizer waste, has been used for the removal of Hg²⁺, Cr⁶⁺, Pb²⁺, and Cu²⁺. Mass transfer kinetic approach has been successfully applied for the determination of various parameters necessary for designing a fixed-bed absorber. Parameters selected are the length of the (PAZ) primary adsorption zone (δ), total time involved for the establishment of primary adsorption zone (t_x), mass rate of flow to the absorber (F_m), time for primary adsorption zone to move down its length (t_δ), amount of adsorbate adsorbed in PAZ from breakpoint to exhaustion (M_s), fractional capacity (f), time of initial formation of PAZ (t_f) and per cent saturation of column at break point. Chemical regeneration has been achieved with 1 M HNO₃.     

Removal of melanoidin present in distillery effluent as a major colorant: a review

Effluent originating from distilleries contain large amount of dark brown coloured wastewater called molasses spent wash (MSW). This MSW is the unwanted residual liquid waste to dispose because of low pH, high temperature, dark brown colour, high ash content, unpleasant odour and high percentage of organic and inorganic matter. Dark brown colour of MSW is due to the presence of melanoidin pigment. It reduces sunlight penetration in rivers and lakes which in turn decrease both photosynthetic activity and dissolved oxygen concentration affecting aquatic life. So the disposal of this effluent is one of the critical environmental issues. A number of treatment processes have been employed for the distillery waste management. This review paper present an overview of the pollution problems caused by melanoidin and the technologies employed globally for its removal.     

Effects of the level of dietary protein on the toxicity of hexachlorocyclohexane in rats

Male albino rats were fed for 28 days from weaning on diets containing 5% (group 1), 10% (group 2) and 21% (group 3, normal protein) protein as casein. At the end of dietary period, HCH was administered daily for 30 days to investigate the interaction between protein deficiency and pesticide toxicity. The results indicated that rats fed a lower protein diet and HCH had a higher mortality, lower rate of growth, increased liver weight and deposition of the pesticide in blood and tissues in larger amounts. Blood pressure (systolic and diastolic) was significantly increased and the heart rate showed tachycardia in low protein exposed animals. A significant increase of total lipids, cholesterol, triglycirides, free fatty acids in serum and tissues of animals exposed to low protein was observed. A close correlation existed between lipid accumulation and storage of HCH in tissues and dietary protein seemed to play an important role in detoxification.     

Photodegradation of the organophosphorus herbicide “anilophos”

Photodecomposition of the organophosphorus herbicide anilophos [S‐(N‐(4‐chlorophenyl) N‐isopropyl carbaniloyl methyl] 0,0‐dimethyl phosphorodithioate has been studied in methanol. It underwent oxidation, hydrolysis and dimerisation on irradiation with U.V. light and produced a number of photoproducts which were characterised by ¹H‐NMR and Mass spectroscopy.     

A simple and robust method for determination of neem (Azadirachta indica A. Juss) oil in neem oil coated urea

The production of neem oil coated urea (NOCU), a technology developed by the Indian Agricultural Research Institute, has been grown to over 2.0 million tons per year. The estimation of neem oil content in NOCU is important due to its significance in ensuring agronomic efficiency. Therefore, this study was taken up to develop a simple method for the determination of neem oil in NOCU. The procedure involves extraction of neem oil from NOCU; saponification of extracted oil; oxidation of released glycerol to formaldehyde, and subsequent conversion of formaldehyde to a dihydrolutidine derivative. Its concentration was determined spectrophotometrically. The recoveries of neem oil from NOCU with oil load of 500 and 1000?ppm were 87.6?±?3.0% and 90.0?±?4.8% respectively with direct method; and improved to 92.6?±?4.0% and 96.7?±?3.8% after including the in situ purification. A simple method based on the Hantzsch reaction was developed for the determination of neem oil in NOCU. This method is superior to earlier methods in terms of sensitivity, simplicity, and time required.     

Estimation of air pollutant emission loads from construction and operational activities of a port and harbour in Mumbai, India

Port causes environmental and health concerns in coastal cities if its operation and development are not made environmentally compatible and sustainable. An emission inventory is necessary to assess the impact of port projects or growth in marine activity as well as to plan mitigation strategies. In this study, a detailed emission inventory of total suspended particulate (TSP) matter, respirable particulate matter (PM₁₀), sulphur dioxide (SO₂) and oxides of nitrogen (NO_x) for a port having operation and construction activities in parallel is compiled. The study has been done for 1 year. Results show that the maximum contribution of emission of air pollutants in the port area was from TSP (68.5%) and the minimum was from SO₂ (5.3%) to the total pollutants considered in this study. Total TSP emission from all activities of the port was 4,452 tyr^???1 and PM₁₀ emission was 903 tyr^???1 in the year 2006. Re-suspension of dust from paved roads was the major contributor of TSP and PM₁₀ in the road transport sector. Construction activities of the port had contributed 3.9% of TSP and 7.4% of PM₁₀ to total emission of particulate matter. Of the total particulate emissions from various port activities approximately 20% of TSP could be attributed to PM₁₀. The sectoral composition indicates that major contribution of SO₂ emission in the port was from maritime sector and major contribution of NO_x was from road transport sector.     

Emissions of gaseous and particulate pollutants in a port and harbour region in India

Ports can generate large quantity of pollutants in the atmosphere due to various activities like loading and unloading,transportation, and construction operations. Determination of the character and quantity of emissions from individual sources is an essential step in any project to control and minimize the emissions.In this study a detailed emission inventory of total suspendedparticulate matter (TSP), particulate matter less than 10 m(PM₁₀), sulfur dioxide (SO₂) and nitrogen oxides (NO_x) for a port and harbour project near Mumbai is compiled. Results show that the total annual average contributions of TSP and PM₁₀ from all the port activitieswere 872 and 221 t yr^-1, respectively. Annual average emissions of gaseous pollutants SO₂ and NO_xwere 56 and 397 t yr^-1, respectively, calculatedby using emission factors for different port activities. The maximum TSP emission (419 t yr ^-1) was from paved roads, while the least (0.4 t yr^-1) was from bulk handling activity. The maximum PM₁₀ emission (123 t yr^-1) was from unpaved roads and minimum (0.2 t yr^-1) from bulk handling operations. Similarly the ratio of TSP and PM₁₀ emission was highest (5.18) from paved roads and least (2.17) from bulk handling operations. Regression relation was derivedfrom existing emission data of TSP and PM₁₀ from variousport activities. Good correlation was observed between TSP andPM₁₀ having regression coefficient >0.8.