Comparison of Two Manual Methods of Nitrogen Dioxide Determination in Ambient Air

Sodium arsenite (modified Jacobs and Hochheiser method; hereafter referred as SA), the most widely used manual monitoring method for determination of nitrogen dioxide (NO₂) in ambient air, particularly in developing countries has been evaluated and compared with US EPA recommended equivalent method of TGS-ANSA (hereafter referred as ANSA). NO₂ concentrations generated from laboratory test atmosphere were analyzed by these two methods and were compared statistically. Laboratory evaluations showed that SA method has high sensitivity to different sampling conditions, which normally vary during actual field monitoring. Hence, correction factors for absorption efficiency were estimated for SA and ANSA methods. Absorption efficiency of NO₂ in SA method was found to be much lower (64%) as against the reported value of 82% at the method recommended sampling conditions, whereas for ANSA method, it was found 1.0 as against the reported value of 0.93. After applying derived correction factors, both the methods produced almost similar concentration values of NO₂.     

Protective effect of Syzygium cumini against pesticide-induced cardiotoxicity

Pesticide-induced toxicity is a serious issue which has resulted in plethora of diseases all over the world. The organophosphate pesticide malathion has caused many incidents of poisoning such as cardiac manifestations. The present study was designed to evaluate the effect of Syzygium cumini on malathion-induced cardiotoxicity. Dose optimization of malathion and polyphenols such as curcumin, (?)-epicatechin, gallic acid, butylated hydroxyl toluene, etc. was done by MTT cell proliferation assay. Nuclear deformities, ROS production, and integrity of extra cellular matrix components were analyzed by different techniques. S. cumini methanolic pulp extract (MPE), a naturally derived gallic acid-enriched antioxidant was taken to study its effect on malathion-induced toxicity. Nuclear deformities, ROS production, and integrity of extra cellular matrix components were also analyzed. Twenty micrograms per milliliter LD50 dose of malathion was found to cause stress-mediated responses in H9C2 cell line. Among all the polyphenols, gallic acid showed the most significant protection against stress. Gallic acid-enriched methanolic S. cumini pulp extract (MPE) showed 59.76 %?±?0.05, 81.61 %?±?1.37, 73.33 %?±?1.33, 77.19 %?±?2.38 and 64.19 %?±?1.43 maximum inhibition for DPPH, ABTS, NO, H₂O₂ and superoxide ion, respectively, as compared to ethanolic pulp extract and aqueous pulp extract. Our study suggests that S. cumini MPE has the ability to protect against the malathion-mediated oxidative stress in cardiac myocytes.     

Unusual fingerprint patterns in humans: implications for forensic casework and fingerprint research

The Science of Nature - Archosaurs diversified and became dominant during the Mesozoic Era, but their earliest relatives (non-archosaurian archosauromorphs) were already scarcely present in the...     

Evaluation of hexachlorocyclohexane contamination from the last lindane production plant operating in India

Purpose

??-Hexachlorocyclohexane (HCH), ??-HCH, and lindane (??-HCH) were listed as persistent organic pollutants by the Stockholm Convention in 2009 and hence must be phased out and their wastes/stockpiles eliminated. At the last operating lindane manufacturing unit, we conducted a preliminary evaluation of HCH contamination levels in soil and water samples collected around the production area and the vicinity of a major dumpsite to inform the design of processes for an appropriate implementation of the Convention.

Methods

Soil and water samples on and around the production site and a major waste dumpsite were measured for HCH levels.

Results

All soil samples taken at the lindane production facility and dumpsite and in their vicinity were contaminated with an isomer pattern characteristic of HCH production waste. At the dumpsite surface samples contained up to 450?g?kg^?1 ?? HCH suggesting that the waste HCH isomers were simply dumped at this location. Ground water in the vicinity and river water was found to be contaminated with 0.2 to 0.4?mg?l^?1 of HCH waste isomers. The total quantity of deposited HCH wastes from the lindane production unit was estimated at between 36,000 and 54,000?t.

Conclusions

The contamination levels in ground and river water suggest significant run-off from the dumped HCH wastes and contamination of drinking water resources. The extent of dumping urgently needs to be assessed regarding the risks to human and ecosystem health. A plan for securing the waste isomers needs to be developed and implemented together with a plan for their final elimination. As part of the assessment, any polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) generated during HCH recycling operations need to be monitored.     

Biosequestration of lead using Bacillus strains isolated from seleniferous soils and sediments of Punjab

The present study was conducted to isolate and explore bacterial strains with a potential to sequester lead (Pb) and tolerate other heavy metals from industrial effluents and sediments. Out of the six bacterial strains isolated from seleniferous sites of Punjab, three isolates (RS-1, RS-2, and RS-3) were screened out for further growth-associated lead sequestration and molecular characterization on the basis of their tolerance toward lead and other heavy metals. Biomass and cell-free supernatant were analyzed for lead contents using ICP-MS after growth-associated lead sequestration studies in tryptone soya broth (pH?=?7.2?±?0.2) under aerobic conditions at 37 °C temperature. Almost 82 % and 70 % divalent lead was sequestered in cell pellets of RS-1 and RS-3, respectively while only 45 % of lead was found in cell pellet of RS-2 in the first 24 h. However, significant biosequestration of lead was observed in RS-2 after 48 h of incubation with concomitant increase in biomass. Simultaneously, morphological, biochemical, and physiological characterization of selected strains was carried out. 16S rRNA gene sequence of these isolates revealed their phylogenetic relationship with class Bacillaceae, a low G + C firmicutes showing 98 % homology with Bacillus sp.     

Performance of a naturally growing Parmelioid lichen Remototrachyna awasthii against organic and inorganic pollutants

The present study aims to assess the level and possible sources of organic and inorganic pollutants in Mahableshwar city in Western part of India and their effect on naturally growing foliose lichen Remototrachyana awasthii (Hale & Patw.) Divakar & A. Crespo. This lichen species growing abundantly in the area was collected from eight different sites on the basis of anthropogenic activities detected in the area. The concentration of inorganic heavy metals (Al, As, Cd, Cr, Fe, Pb, Mn, and Zn) and polycyclic aromatic hydrocarbons (PAHs) were analyzed and correlated with photosynthetic pigments (Chl a, Chl b, total chlorophyll, and carotenoid) together with chlorophyll degradation and protein contents. The concentration of most of the metals at different sites was significantly greater than at the control site (P?<?0.001). The highest metal content was found at Bus Stand and Panchgani, a tourist place that experiences heavy traffic activities. The concentration of PAHs, particularly of two-and three-ringed PAHs, was also found to be the highest in samples collected at Bus Stand area. The chlorophyll degradation and protein content were found to be the most sensitive parameters to assess the vitality of lichen thallus against wide range of air pollutants. The effectiveness of R. awasthii as a biomonitor will be investigated in the near future by comparing this species with other biomonitors.     

Assessing impact of industrialization in terms of LULC in a dry tropical region (Chhattisgarh), India using remote sensing data and GIS over a period of 30 years

The main focus of the paper is to assess the land use/ land cover (LULC) change in northern Chhattisgarh due to industrialization using remote sensing and Geographical Information System (GIS). The impact was assessed using an information extraction method applied to temporal satellite data (LANDSAT and IRS scenes) in GIS domain. For assessing the impact on natural resources, the classification scheme was restricted to (1) Forest patches ((a) completely cleared, (b) partially cleared, (c) least affected), (2) Non-Forest ((d) completely changed, (e) least changed), (3) Industrial/Mining area, and (4) River. Over the three decades 22.22% of forests have been completely cleared and converted to industrial setup. Another 25% is completely cleared and 10% is degraded. Around 4% of agricultural area is totally affected due to industrial activity. Random assessment of plant distribution (Trees, Shrubs and Herbs) indicates significant changes in the herb distribution directly related to distance gradient form the industrial/mining setup. Visual recording, socio-economic survey and satellite data also helped in delineation of extent of environmental pollution in forest and non-forest areas. The paper presents methodology for the environmental impact assessment.     

Assessment of environmental benefits of flyover construction over signalized junctions: a case study

In the present study, the impact of the flyover construction to curb traffic congestion problem has been assessed in terms of traffic decongestion, time saving, fuel saving and emission reduction. A flyover has also been constructed over four signalized junctions in the main commercial area in Nagpur city, India. It was found that about 35% of the total traffic is diverted to the flyover, which results in a reduction of about 32% in the total emission generation. Travel on the flyover resulted in as much as 60-70% saving in time, compared to the travel on the main road, particularly when all the four signals are found to be in the red phase. The loss of fuel for combustion and the associated cost resulting from waiting for the signal to change are also estimated, and these are found to be significant.     

Can adaptive modulation of traits to urban environments facilitate Ricinus communis L. invasiveness?

This paper addresses the phenotypic variation among Ricinus communis L. populations in four urban habitat types (road verges, garbage dumps, construction debris, and natural area) in Delhi, India, by evaluating important traits such as plant height, basal circumference, seeds per plant, seed size, seed weight, specific leaf area, and reproductive index. An important biochemical marker, proline, considered as a good plant performance indicator under stress was also quantified in leaves of R. communis to evaluate its response in different habitats. Interestingly, the species showed significant variation in plant height, specific leaf area, seed size, seed weight, and leaf proline content in different habitat types. Leaf proline content was positively related to plant height, specific leaf area, and seed size while negatively related to the total number of seeds/plant. Interestingly, reproductive index, calculated as a ratio of the total number of seeds to the plant height also showed a negative relation with leaf proline content. Results indicated that R. communis exhibits adaptive modulation of growth, reproductive traits, and leaf proline content in various urban habitats which contributes to invasiveness, range expansion, and establishment of the species. The study also gives evidence of how morphological and physiological traits could directly affect invasiveness of R. communis.