Desert Water Harvesting to Benefit Wildlife: A Simple, Cheap, And Durable Sub-Surface Water Harvester for Remote Locations

A sub-surface desert water harvester was constructed in the sagebrush steppe habitat of south-central Idaho, U.S.A. The desert water harvester utilizes a buried micro-catchment and three buried storage tanks to augment water for wildlife during the dry season. In this region, mean annual precipitation (MAP) ranges between about 150–250 mm (6″–10″), 70% of which falls during the cold season, November to May. Mid-summer through early autumn, June through October, is the dry portion of the year. During this period, the sub-surface water harvester provides supplemental water for wildlife for 30–90 days, depending upon the precipitation that year. The desert water harvester is constructed with commonly available, “over the counter” materials. The micro-catchment is made of a square-shaped, 20 mL. “PERMALON” polyethylene pond liner (approximately 22.9 m × 22.9 m = 523 m²) buried at a depth of about 60 cm. A PVC pipe connects the harvester with two storage tanks and a drinking trough. The total capacity of the water harvester is about 4777 L (1262 U.S. gallons) which includes three underground storage tanks, a trough and pipes. The drinking trough is refined with an access ramp for birds and small animals. The technology is simple, cheap, and durable and can be adapted to other uses, e.g. drip irrigation, short-term water for small livestock, poultry farming etc. The desert water harvester can be used to concentrate and collect water from precipitation and run-off in semi-arid and arid regions. Water harvested in such a relatively small area will not impact the ground water table but it should help to grow small areas of crops or vegetables to aid villagers in self-sufficiency.     

Monitoring of Phenol in Wastewater Bioremediation by HPLC

Bioremediation emphasizes the detoxification and destruction of toxic substances by microorganisms. Wastewater obtained from an industrial concern was solvent extracted with methyl alcohol and dichloromethane and analysed by GC/MS. Besides phenol, a large variety of organic compounds were detected. Under controlled laboratory conditions, the wastewater was innoculated with a mixed culture of microorganisms specially selected for their abilities to degrade phenol. Samples were collected at regular intervals from the stirred tank bioreactor and analysed for phenol by reverse phase HPLC with a C18 column. Results shows that from an initial phenol concentration of 987 ppm, slightly more than 50% was destroyed within 163 hours. The dry weight of the microorganisms and the plate count (CFU/ml) shows a steady increase from 0.5238 gms to 0.5355 gms and from 1.1E+9 to 1.94E+13 respectively over the same period. This suggested that the phenol was consumed by the microorganisms as the sole carbon source.     

Precaution,uncertainty and causation in environmental decisions

What measures of uncertainty and what causal analysis can improve the management of potentially severe, irreversible or dreaded environmental outcomes? Environmental choices show that policies intended to be precautionary (such as adding MTBE to petrol) can cause unanticipated harm (by mobilizing benzene, a known leukemogen, in the ground water). Many environmental law principles set the boundaries of what should be done but do not provide an operational construct to answer this question. Those principles, ranging from the precautionary principle to protecting human health from a significant risk of material health impairment, do not explain how to make environmental management choices when incomplete, inconsistent and complex scientific evidence characterizes potentially adverse environmental outcomes. Rather, they pass the task to lower jurisdictions such as agencies or authorities. To achieve the goals of the principle, those who draft it must deal with scientific casual conjectures, partial knowledge and variable data. In this paper we specifically deal with the qualitative and quantitative aspects of the European Union's (EU) explanation of consistency and on the examination of scientific developments relevant to variability and uncertain data and causation. Managing hazards under the precautionary principle requires inductive, empirical methods of assessment. However, acting on a scientific conjecture can also be socially unfair, costly, and detrimental when applied to complex environmental choices. We describe a constructive framework rationally to meet the command of the precautionary principle using alternative measures of uncertainty and recent statistical methods of causal analysis. These measures and methods can bridge the gap between conjectured future irreversible or severe harm and scant scientific evidence, thus leading to more confident and resilient social choices. We review two sets of measures and computational systems to deal with uncertainty and link them to causation through inductive empirical methods such as Bayesian Networks. We conclude that primary legislation concerned with large uncertainties and potential severe or dreaded environmental outcomes can produce accurate and efficient choices. To do so, primary legislation should specifically indicate what measures can represent uncertainty and how to deal with uncertain causation thus providing guidance to an agency's rulemaking or to an authority's writing secondary legislation. A corollary conclusion with legal, scientific and probabilistic implications concerns how to update past information when the state of information increases because a failure to update can result in regretting past choices. Elected legislators have the democratic mandate to formulate precautionary principles and are accountable. To preserve that mandate, imbedding formal methods to represent uncertainty in the statutory language of the precautionary principle enhances subsequent judicial review of legislative actions. The framework that we propose also reduces the Balkanized views and interpretations of probabilities, possibilities, likelihood and uncertainty that exists in environmental decision-making.     

Estimating human exposure to transport noise in central Dublin, Ireland

This paper reports on research conducted to determine estimates of the extent of environmental noise exposure from road transport on residents and workers in central Dublin, Ireland. The Harmonoise calculation method is used to calculate noise values for the study area while a Geographical Information System (GIS) is utilised as a platform upon which levels of noise exposure are estimated. Residential exposure is determined for L(den) and L(night) while worker exposure is determined for L(den). In order to analyse the potential of traffic management as a noise abatement measure, traffic was redirected from the main residential areas to alternative road links and the revised exposure levels were determined. The results show that the extent of noise exposure in Dublin is considerable, and in relative terms, it is worse for the night-time period. In addition, the results suggest also that traffic management measures have the potential to lead to significant reductions in the level of noise exposure provided that careful consideration is given to the impact of traffic flows on residential populations.     

Awareness and convenience are important in increasing conference sustainability

Conference organizers are increasingly making efforts to reduce resource use at conferences, yet few responsibilities are placed on attendees. We hosted an ecology conference and offered attendees a discount if they took a sustainability pledge agreeing to reduce their resource use at the conference. In a post-conference survey, 83% of respondents reported fulfilling the pledge, but 62% indicated that convenience was the biggest obstacle impeding their ability to continue the pledge during and after the conference. We found great willingness by attendees to reduce resource use at and beyond our conference, and facilitating their participation was an important part of our success.     

The role of facet importance as a moderator in job satisfaction processes

Two studies were designed to test hypotheses derived from Locke's (1969, 1976, 1984) model of job satisfaction. Consistent with the model, both studies found that perceived have-want discrepancy scores were powerful predictors of facet job satisfaction. In addition, facet importance tended to moderate this relationship in the manner predicted by Locke. Workers who viewed a job facet as having high importance were more satisfied with a small perceived have-want discrepancy and more dissatisfied with a large discrepancy than workers who viewed the facet as having low importance. Finally, as expected, facet importance failed to moderate the relationship between facet satisfaction and overall job satisfaction. This finding supports Locke's proposition that facet satisfaction scores are ‘implicitly weighted’ by facet importance. Implications and directions for future research are discussed.     

GEOLOGIC INFERENCE FROM “FLOW NET” TRANSMISSIVITY DETERMINATION: THREE CASE STUDIES1

A graphical inverse method for determining the regional transmissivity distribution was applied to three field problems. The study areas were the Hanford Site, Washington; the Rocky Mountain Arsenal, Colorado; and the Nevada Test Site, Nevada. This method can aid in flow system conceptualization by revealing the location of bedrock controls for groundwater flow. It is a valuable tool for aiding the hydrogeologist in asking questions about the nature of trends in the pattern of transmissivity values. Quantitative estimates of regional transmissivities can be used as starting points for further parameter refinement. Sensitivity analysis using Monte Carlo simulation shows that quantitative estimates of transmissivity can be obtained when measurement error in the hydraulic head does not cause a large error in the hydraulic gradient.