A Cumulative Energy Demand indicator (CED), life cycle based,for industrial waste management decision making

Life cycle thinking is a good approach to be used for environmental decision-support, although the complexity of the Life Cycle Assessment (LCA) studies sometimes prevents their wide use. The purpose of this paper is to show how LCA methodology can be simplified to be more useful for certain applications.In order to improve waste management in Catalonia (Spain), a Cumulative Energy Demand indicator (LCA-based) has been used to obtain four mathematical models to help the government in the decision of preventing or allowing a specific waste from going out of the borders. The conceptual equations and all the subsequent developments and assumptions made to obtain the simplified models are presented.One of the four models is discussed in detail, presenting the final simplified equation to be subsequently used by the government in decision making.The resulting model has been found to be scientifically robust, simple to implement and, above all, fulfilling its purpose: the limitation of waste transport out of Catalonia unless the waste recovery operations are significantly better and justify this transport.     

Method optimization to measure polybrominated diphenyl ether (PBDE) concentrations in soils of Bratislava, Slovakia

We modified an analytical method to determine polybrominated diphenyl ethers (PBDEs) in urban soils of Bratislava (Slovakia). Gel permeation chromatography (GPC) introduced as a clean-up step for soil extracts substantially reduced matrix enhancements when PBDEs were measured with gas chromatography-negative chemical ionization-mass spectrometry (GC-NCI-MS). The resulting method proved to be accurate, precise, and showed low detection limits. The sum of 15 PBDE concentrations in surface horizons of Bratislava soils ranged from 87 to 627 pg g⁻¹. PBDE concentrations were mostly higher in surface than deeper horizons probably because of atmospheric deposition and lack of substantial vertical transport. Lower brominated PBDEs undergo more soil-atmosphere exchanges or are more scavenged and transferred with litter fall to the soil organic matter than higher brominated ones as suggested by the correlation between lower brominated PBDEs and soil organic C (C_org) concentrations.     

Histopathological effects of copper and lithium in the ramshorn snail, Marisa cornuarietis (Gastropoda, Prosobranchia)

The aim of this study was to determine and quantify effects of copper and lithium in tissues of early juveniles of the ramshorn snail, Marisa cornuarietis. For this purpose, hatchlings of M. cornuarietis were exposed for 7 days to a range of five different sublethal concentrations of copper (5, 10, 25, 50, and 75 μg Cu²⁺ L⁻¹) and lithium (50, 100, 200, 1000, and 5000 μg Li⁺ L⁻¹). Both metals changed the tissue structure of epidermis, hepatopancreas, and gills, varying between slight and strong reactions, depending on the copper and lithium concentration. The histopathological changes included alterations in epithelial and mucous cells of the epidermis, swelling of hepatopancreatic digestive cells, alterations in the number of basophilic cells, abnormal apices of digestive cells, irregularly shaped cilia and changes in the amount of mucus in the gills. The most sensible organ in M. cornuarietis indicating Cu or Li pollution is the hepatopancreas (LOECs were 10 μg Cu²⁺ L⁻¹, or 200 μg Li⁺ L⁻¹). In epidermis, mantle and gills relevant effects occurred with higher LOECs (50 μg Cu²⁺ L⁻¹, or 1000 μg Li⁺ L⁻¹). Base on LOECs, our results indicated that histopathological endpoints are high sensitivity to copper and lithium compared to endpoints for embryonic developmental toxicity.     

Accumulation, distribution and cellular partitioning of mercury in several halophytes of a contaminated salt marsh

This work evaluates the role of a plant community in mercury (Hg) stabilization and mobility in a contaminated Portuguese salt marsh. With this aim, the distribution of Hg in below and aboveground tissues, as well as the metal partitioning between cellular fractions (soluble and insoluble) in four different species (Triglochin maritima L., Juncus maritimus Lam, Sarcocornia perennis (Miller) A.J. Scott, and Halimione portulacoides (L.) Aellen) was assessed. Mercury accumulation, translocation and compartmentation between organs and cellular fractions were related to the plant species.Results showed that the degree of Hg absorption and retention was influenced both by environmental parameters and metal translocation/partitioning strategies. Different plant species presented different allocation patterns, with marked differences between monocots (T. maritima and J. maritimus) and dicots (S. perennis, H. portulacoides). Overall, the two monocots, in particular T. maritima showed higher Hg retention in the belowground organs whereas the dicots, particularly S. perennis presented a more pronounced translocation to the aboveground tissues. Considering cellular Hg partitioning, all species showed a higher Hg binding to cell walls and membranes rather than in the soluble fractions. This strategy can be related to the high degree of tolerance observed in the studied species. These results indicate that the composition of salt marsh plant communities can be very important in dictating the Hg mobility within the marsh ecosystem and in the rest of the aquatic system as well as providing important insights to future phytoremediation approaches in Hg contaminated salt marshes.     

A fuzzy multi-attribute model for risk evaluation in workplaces

Risk assessment constitutes a critical phase of the safety management process. It basically consists of evaluating the risks involved in the execution of working activities, so as to provide the managers with information suitable to address intervention measures. The most important activity in risk assessment is the risk evaluation task but, despite its importance, national and international regulations have never formalized a standard methodology for addressing it, leaving companies complete freedom to adopt the approach they consider appropriate. As a consequence, companies generally settle on the use of simple methodologies which frequently are not able to emphasize all the main aspects affecting risk in the workplace and to produce a precise ranking of hazardous activities. In this paper, a new methodology for risk evaluation is then proposed with the aim to overcome limitations of the classical approaches. In particular, new factors are introduced to take into account effects of human behavior and environment on risk level, other than the classical injury magnitude and occurrence probability of an accident. The proposed methodology also integrates an estimative approach based on the fuzzy logic theory, which permits more coherence in the evaluation process, producing a very suitable final rank of hazardous activities. Finally, an actual case study is reported to show the capabilities of the new risk evaluation model.     

Recycling polymeric waste from electronic and automotive sectors into value added products

The environmentally sustainable disposal and recycling of ever increasing volumes of electronic waste has become a global waste management issue. The addition of up to 25% polymeric waste PCBs (printed circuit boards) as fillers in polypropylene (PP) composites was partially successful: while the tensile modulus, flexural strength and flexural modulus of composites were enhanced, the tensile and impact strengths were found to decrease. As a lowering of impact strength can significantly limit the application of PP based composites, it is necessary to incorporate impact modifying polymers such as rubbery particles in the mix. We report on a novel investigation on the simultaneous utilization of electronic and automotive rubber waste as fillers in PP composites. These composites were prepared by using 25 wt.% polymeric PCB powder, up to 9% of ethylene propylene rubber (EPR), and PP: balance. The influence of EPR on the structural, thermal, mechanical and rheological properties of PP/PCB/ EPR composites was investigated. While the addition of EPR caused the nucleation of the β crystalline phase of PP, the onset temperature for thermal degradation was found to decrease by 8%. The tensile modulus and strength decreased by 16% and 19%, respectively; and the elongation at break increased by ~71%. The impact strength showed a maximum increase of ~18% at 7 wt.%–9 wt.% EPR content. Various rheological properties were found to be well within the range of processing limits. This novel eco-friendly approach could help utilize significant amounts of polymeric electronic and automotive waste for fabricating valuable polymer composites.

Open image in new window

     

Monitoring of marine mucilage formation in Italian seas investigated by infrared spectroscopy and independent component analysis

The aim of this study is to present and to discuss some characteristics of recalcitrant organic matter mechanism and formation. These aggregates called mucilages that are produced by the degradation reactions of several algae, have been investigated by infrared (FTIR) spectroscopy. FTIR spectra of macroaggregates produced by different algal samples have been daily collected in order to investigate the steps of aggregation. Afterwards, they have been elaborated by means of Independent Component Analysis (ICA). ICA investigation of FTIR spectra showed that the global aggregation process of marine mucilage always consisted of two different phases or independent components (ICs). One IC is related to the first degradation step of algal cells leading to the production of mono and oligosaccharides with aminoacids and oligopeptides. The second IC is related to the polymerization of oligosaccharides with aminoacids and oligopeptides and to their interaction with less polar compounds such as lipids thus producing supramolecular structures. The emerging mechanisms of anomalous size aggregates of organic matter match those of natural organic matter aggregation. The approach we suggest is to use synthetic mucilages which allows to monitor the macroaggregates formation because it can hardly be performed by means of natural marine macroaggregates.     

Trisomy 15 mosaicism owing to familial reciprocal translocation t(1;15): implication for prenatal diagnosis

We describe a 4-year-old female child with severe global mental retardation, myoclonic epilepsy, proximal hypotonia and dysmorphisms, whose prenatal diagnosis following amniocentesis revealed a constitutional female karyotype carrying a t(1;15)(q10;p11) familial reciprocal translocation. Post-natal high-resolution karyotype, Fluorescence in situ hybridization (FISH) screening for subtelomeric rearrangements, VNTR search for UPD15 in the blood and fibroblast, and WCP1 and 15 in the mother, failed to provide an explanation for the complex clinical phenotype of the proband. Since the pachytene configuration of the translocated chromosomes defines a high probability of 3:1 segregation, an extensive workup was undertaken to look for a possibly cryptic mosaicism. Four percent of the cells with trisomy 15 was found in the peripheral blood lymphocytes examined by classical cytogenetic technique and interphase FISH analysis. The clinical features associated with cryptic trisomy 15 mosaicism and the problems concerning prenatal diagnosis and genetic counselling for carriers of translocations at high risk of 3:1 segregation are discussed. Copyright © 2006 John Wiley & Sons, Ltd.