Using penalty functions to evaluate aggregation models for environmental indices

The purpose of indices is to summarize a large volume of information into a single number that is easy to understand and interpret. Environmental indices provide a composite picture of an environmental condition derived from a series of observed measurements and parameters. They are used as communication tools by regulatory agencies to characterize the state of a specific environmental system (air, water, and sediments) and to study the impact of regulatory policies on various environmental management practices. In the development of environmental indices, a few issues and problems have been encountered arising as a result of the abstraction of information and data. These problems are referred to as characteristic properties that include ambiguity, eclipsing, compensation and rigidity. These characteristic properties have long been identified and interpreted in Boolean (e.g., Yes/No) or qualitative (e.g., low, medium, high) terms. In this paper, we propose a new approach to describe the above stated characteristic properties on a continuous scale to evaluate and compare the behavior of various aggregation models. Our approach is based on developing penalty functions for each characteristic property. A water quality index example by Swamee and Tyagi (2000) is used to explain our approach. A detailed case study for a developing microbial risk index is also provided to show how the proposed approach can be extended to complex hierarchical systems. Results show that it is possible to improve aggregation models for index development. Future research directions to improve index development are also discussed.     

Application of cryofocusing hydride generation and atomic fluorescence detection for dissolved mercury species determination in natural water samples

The concentration levels of mercury (Hg) species in natural water samples are usually low. Consequently, accurate analysis with low detection limits is still a major problem. In this work, a method was applied for the simultaneous direct determination of dissolved mercury species in water samples by on-line hydride generation (HG), cryogenic trapping (CT), gas chromatography (GC) and detection by atomic fluorescence spectrometry (AFS). The suitability of the method for real samples with different organic matter and chloride contents was evaluated by recovery experiments in synthetic and natural spiked water samples. The HG method was compared with other current available methods for mercury analysis with respect to the different fraction of mercury analysed, i.e. 'reactive', 'reducible' or total. HG derivatization and SnCl2 reduction (with and without previous oxidation with BrCl) were applied to synthetic and natural (spiked and non-spiked) water samples. The influence of chloride and dissolved organic matter concentrations was studied. The results suggest that the HG procedure is suitable for the simultaneous determination of Hg2+ and MeHg+ in surface water samples. Inorganic mercury analysed by HG (i.e. reducible) is close to the total inorganic mercury.     

Metallothionein-like metalloproteins in the Baltic clam Macoma balthica : seasonal variations and induction upon metal exposure

Metallothionein-like proteins (MTLs) have been measured by differential pulse polarography every two months during a period of two and half years in the marine bivalve Macoma balthica from two locations of the Western Scheldt Estuary. The MTL concentrations (0.85 to 7.81 mg g⁻¹ dry wt) are comparable to most values found for other marine invertebrates. These concentrations vary significantly with the seasons (higher in winter, lower in summer), which is mainly due to body weight fluctuations. Strong correlations exist between MTL and metal levels. Upon short-term exposure to a mixture of Cd, Cu and Zn, there are on average significant MTL increases, but important seasonal variations have been observed: in winter, the clams are more sensitive to metals, uptake more Cd and Cu and induce more MTL than during the warmer months. Received: 16 May 1997 / Accepted: 6 June 1997     

Assessing regulatory violations of disinfection by-products in water distribution networks using a non-compliance potential index

Inactivating pathogens is essential to eradicate waterborne diseases. However, disinfection forms undesirable disinfection by-products (DBPs) in the presence of natural organic matter. Many regulations and guidelines exist to limit DBP exposure for eliminating possible health impacts such as bladder cancer, reproductive effects, and child development effects. In this paper, an index named non-compliance potential (NCP) index is proposed to evaluate regulatory violations by DBPs. The index can serve to evaluate water quality in distribution networks using the Bayesian Belief Network (BBN). BBN is a graphical model to represent contributing variables and their probabilistic relationships. Total trihalomethanes (TTHM), haloacetic acids (HAA5), and free residual chlorine (FRC) are selected as the variables to predict the NCP index. A methodology has been proposed to implement the index using either monitored data, empirical model results (e.g., multiple linear regression), and disinfectant kinetics through EPANET simulations. The index’s usefulness is demonstrated through two case studies on municipal distribution systems using both full-scale monitoring and modeled data. The proposed approach can be implemented for data-sparse conditions, making it especially useful for smaller municipal drinking water systems.     

Regional status assessment of stony corals in the US Virgin Islands

States may protect coral reefs using biological water quality standards outlined by the Clean Water Act. This requires biological assessments with indicators sensitive to human disturbance and regional, probability-based survey designs. Stony coral condition was characterized on a regional scale for the first time in the nearshore waters of the US Virgin Islands (USVI). Coral composition, abundance, size, and health were assessed at 66 stations in the St. Croix region in fall 2007 and at 63 stations in the St. Thomas and St. John region in winter 2009. Indicators were chosen for their sensitivity to human disturbance. Both surveys were probability-based (random) designs with station locations preselected from areas covered by hardbottom and coral reef substrate. Taxa richness was as high as 21 species but more than half the area of both regions exhibited taxa richness of <10 species in the 25 m² transect area. Coral density was as high as 5 colonies m^?2 but more than half the area of both regions had <2 colonies m^?2. Both regions showed similar dominant species based on frequency of occurrence and relative abundance. Because of large colony sizes, Montastrea annularis provided more total surface area and live surface area than more abundant species. The surveys establish baseline regional conditions and provide a foundation for long-term regional monitoring envisioned by the USVI Department of Planning and Natural Resources. The probabilistic sampling design assures the data can be used in Clean Water Act reporting.     

Trihalomethanes in Drinking Water of Greater Québec Region (Canada): Occurrence, Variations and Modelling

The levels of trihalomethanes (THMs) – the main species of by-product from water chlorination – were monitored in thedistribution systems of the five major drinking water utilitiesof the greater area of Québec City in order to investigate andmodel their occurrence on a spatial and seasonal basis. Data forTHMs and other water quality and operational parametersassociated with their formation were generated through a 16 monthsampling program involving several sites representing variablewater residence times, from the plant to the system extremity.The results demonstrate that the differences in measured THMlevels between the five utilities are mainly due to the variablequality of raw waters, the type of water treatment process beingused and the type and levels of applied disinfectant. Dependingon the utility, average THM levels were from 1.3 to 2.5 timeshigher in the system extremities than in the water leaving thetreatment plant. Also, average levels of THMs measured in summerat the distribution system extremities were, depending on theutility, from 2.5 to 5 times higher than the average levelsmeasured in winter. The seasonal differences were found to besignificantly greater than those observed by others in waterutilities in the United States and Europe and are explained inlarge part by the considerable changes, over the year, in thequality and temperature of surface waters in Southern Québec. Forthe five utilities under study, multivariate regression modelswere developed in order to predict spatial and seasonalvariations of THMs. Both residual chlorine demand and temperaturewere found to be better, statistically, as predictors for THMoccurrence. The usefulness of the developed models for routineand long term water quality management, as well as for assessmentof human exposure to THMs, are also discussed.     

INTEGRATING SCIENCE AND TECHNOLOGY TO SUPPORT STREAM NATURALIZATION NEAR CHICAGO,ILLINOIS1

ABSTRACT: Many urban and suburban communities in the Midwest are seeking to establish sustainable, morphologically and hydraulically varied, yet dynamically stable fluvial systems that are capable of supporting healthy, biologically diverse aquatic ecosystems — a process known as stream naturalization. This paper describes an integrated research program that seeks to develop a scientific and technological framework to support two stream naturalization projects near Chicago, Illinois. The research program integrates theory and methods in fluvial geomorphology, aquatic ecology, hydraulic engineering and social theory. Both the conceptual and the practical challenges of that integration are discussed. Scientific and technical support emphasize the development of predictive tools to evaluate the performance of possible naturalization designs at scales most appropriate to community based projects. Social analysis focuses on place based evaluations of how communities formulate an environmental vision and then, through decision making, translate this vision into specific stream naturalization strategies. Integration of scientific and technical with social components occurs in the context of community based decision making as the predictive tools are employed by project scientists to help local communities translate their environmental visions into concrete environmental designs. Social analysis of this decision making process reveals how the interplay between the community's vision of what they want the watershed to become, and the scientific perspective on what the watershed can become to achieve the community's environmental goals, leads to the implementation of specific stream naturalization practices.     

Water distribution system failure: a framework for forensic analysis

The main purpose of a water distribution system (WDS) is to deliver safe water of desirable quality, quantity and continuity to consumers. However, in many cases, a WDS fails to fulfill its goal owing to structural and associated hydraulic failures and/or water quality failures. The impact of these failures can be reduced significantly if preventive actions are taken based on their potential of occurrences or if a failure occurs and is detected within a minimum period of time after its occurrence. The aim of this research was to develop a forensic system for WDS failures. As part of the proposed forensic analysis, a framework has been developed, which investigates structural and associated hydraulic failures as well as water quality failures and integrates all failure investigation under a single platform. Under this framework, four different models have been developed to evaluate and identify structural and associated hydraulic failures and water quality failures. If a failure is detected in the system, the framework is capable of identifying the most probable location of the failure. To investigate the effectiveness of the proposed framework, the developed models have been tested and implemented in different WDSs.     

A Modeling System to Assess Land Cover Land Use Change Effects on SAV Habitat in the Mobile Bay Estuary

Estuarine ecosystems are largely influenced by watersheds directly connected to them. In the Mobile Bay, Alabama watersheds we examined the effect of land cover and land use (LCLU) changes on discharge rate, water properties, and submerged aquatic vegetation, including freshwater macrophytes and seagrasses, throughout the estuary. LCLU scenarios from 1948, 1992, 2001, and 2030 were used to influence watershed and hydrodynamic models and evaluate the impact of LCLU change on shallow aquatic ecosystems. Overall, our modeling results found that LCLU changes increased freshwater flows into Mobile Bay altering temperature, salinity, and total suspended sediments (TSS). Increased urban land uses coupled with decreased agricultural/pasture lands reduced TSS in the water column. However, increased urbanization or agricultural/pasture land coupled with decreased forest land resulted in higher TSS concentrations. Higher sediment loads were usually strongly correlated with higher TSS levels, except in areas where a large extent of wetlands retained sediment discharged during rainfall events. The modeling results indicated improved water clarity in the shallow aquatic regions of Mississippi Sound and degraded water clarity in the Wolf Bay estuary. This integrated modeling approach will provide new knowledge and tools for coastal resource managers to manage shallow aquatic habitats that provide critical ecosystem services.