Impact of Land Use on Soluble Organic Nitrogen in Soil

Although it has been hypothesized that soluble organic nitrogen (SON) plays a central role in regulating productivity in some terrestrial ecosystems, the factors controlling the size of the SON pool in soil remain poorly understood. Therefore our principal aim in this work was to assess the impact of seven different land use systems (rough and managed grassland, deciduous and coniferous woodland, heathland, wetland and tilled land) on the size of the SON and inorganic N (NO ₃ ^– , NH ₄ ⁺ ) pools in the surface soil layer (0–15 cm). After extraction with deionised water, we found that in most cases the size of the water extractable organic N (WEON) pool was similar in size to the inorganic N pool. In contrast, the KCl extractable organic N (KClEON) pool constituted the dominant form of soluble N in soils under all land uses, perhaps indicating that significant amounts were held on the soil exchange phase. In contrast to inorganic N, which varied significantly with land use, the size of the KClEON and WEON pool was similar for all land uses with the exception of KClEON in tilled land, where significantly lower amounts were observed. We conclude that SON constitutes an important soil N pool in a broad range of land uses, and that its role in microbial N assimilation, plant nutrition and ecosystem responses to atmospheric N deposition warrants further attention. SAFRD, University of Newcastle, Newcastle-upon-Tyne, NE1 7RU, U.K.     

Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

Sorbitol and glycerol were used to plasticize sugar beet pulp-poly(lactic acid) green composites. The plasticizer was incorporated into sugar beet pulp (SBP) at 0%, 10%, 20%, 30% and 40% w/w at low temperature and shear and then compounded with poly(lactic acid) (PLA) using twin-screw extrusion and injection molding. The SBP:PLA ratio was maintained at 30:70. As expected, tensile strength decreased by 25% and the elongation increased. Acoustic emission (AE) showed correlated debonding and fracture mechanisms for up to 20% w/w plasticizer and uncorrelated debonding and fracture for 30–40% sorbitol and 30% glycerol content in SBP–PLA composites. All samples had a well dispersed SBP phase with some aggregation in the PLA matrix. However, at 40% glycerol plasticized SBP–PLA composites exhibited unique AE behavior and confocal microscopy revealed the plasticized SBP and PLA formed a co-continuous two phase system.

Trace element concentrations in surface estuarine and marine sediments along the Mississippi Gulf Coast following Hurricane Katrina

Hurricanes are relatively frequent ecological disturbances that may cause potentially long-term impacts to the coastal environment. Hurricane Katrina hit the Mississippi Gulf Coast in August 2005, and caused a storm surge with the potential to change the trace element content of coastal surface sediments. In this study, surface estuarine and marine sediments were collected monthly following the storm from ten sites along the Mississippi Gulf Coast (Mobile Bay, Grand Bay Bayous Heron and Cumbest, Pascagoula, Ocean Springs, Biloxi Gulf, Back Biloxi Bay, Gulfport Gulf, Gulfport Courthouse Rd, and Gulfport Marina). Concentrations of V, Cr, Mn, Fe, Co, Ni, Zn, As, Cd, and Pb were measured by inductively coupled plasma–mass spectrometry to evaluate their temporal and spatial variations in the year following Hurricane Katrina. Sediments were characterized by pH, particle size distribution and total carbon and nitrogen content. Trace element contents of the sediments were determined in both <2 mm and <63 μm grain size fractions. Results revealed no significant temporal and spatial variability in trace element concentrations, in either size fraction. Potential ecological risk of the sediments was assessed by using NOAA SQuiRTs’ guideline values; most concentrations remained below probable adverse effects guidelines to marine organisms suggesting that trace elements redistributed by Hurricane Katrina would not cause an adverse impact on resident organisms. Instead, the concentrations of trace elements were site-dependent, with specific contaminants relating to the use of the area prior to Hurricane Katrina.     

Alternative Control Policies for Water Quality Management: An Experimental Economics Approach

Problems of deteriorating water quality and the prospects of large invest ments for treatment facilities have motivated government decision makers to seek more cost-effective means to manage water quality. The most preferred policy advocated by economists is based on economic incentives. But the response of water quality managers to a particular incentive system cannot be predicted a priori . Before any incentive system is implemented, its effectiveness must be evaluated. Mathematical programming models have been used for this purpose. Experimental economics provides an alternative mechanism for testing the effectiveness of such a system. It can also help identify the necessary parameters of incentive-based systems. The objective of this paper is to describe the results of an experiment for evaluating the effectiveness of managing water quality under two different policies: a command and control policy; and a transferable discharge permit (TDP) policy. A review of previous research on the effectiveness of TDP systems is provided along with arguments supporting the use of experimental economics to investigate these problems. The particular experiments developed for this research along with the experimental procedures are described. Key results and observations from the experiments are presented.     

NEGOTIATING SCIENCE AND VALUES WITH STAKEHOLDERS IN THE ILLINOIS RIVER BASIN1

ABSTRACT: Current research in the Illinois River Basin is designed to develop and test a policy formulation protocol that will foster watershed management policy that is fully legitimated (i.e., policy that is technically effective, economically efficient, administratively implementable, politically feasible, and socially acceptable). This paper describes the results of the initial baseline impact assessment that includes physical, biological, economic, legal, and social systems as well as the development of a watershed management decision support system that is used to integrate technical information and analyses, and to facilitate policy maker and stakeholder negotiation workshops. Numerically modeled and visually simulated environmental impacts serve as the basis for developing alternative policy maker scenarios for prospective watershed management policies. These scenarios, which will be subjected to stakeholder review and negotiation, will undergo iterative review and amendment by policy makers and stakeholder groups to produce a recommended watershed management policy that satisfies all five substantive legitimation criteria. Preliminary results from the baseline social impact assessment indicate that fully legitimated policy is indeed obtainable.     

Solvent-Free Polymerization of l-Aspartic Acid in the Presence of d-Sorbitol to Obtain Water Soluble or Network Copolymers

l-Aspartic acid was thermally polymerized in the presence of d-sorbitol with the goal of synthesizing new, higher molecular weight water soluble and absorbent copolymers. No reaction occurred when aspartic acid alone was heated at 170 or 200 °C. In contrast, heating sorbitol and aspartic acid neat or with ammonium hydroxide gave a mixture of water soluble and insoluble copolymers of polysuccinimide and sorbitol. In the presence of phosphoric acid, sorbitol aspartate ester copolymers having both water soluble and highly swollen gel components were formed. These results indicate that polysaccharides such as sorbitol can readily react to form copolymer ester/amides with aspartic acid and such copolymers may have utility as biodegradable water soluble and swellable polyampholytes.     

Determination of total and partially extractable solid-bound element concentrations using collision/reaction cell inductively coupled plasma-mass spectrometry and their significance in environmental studies

Determination of solid-bound element concentrations is an important initial step in environmental studies especially for assessment of contamination level, and of origin, relative mobility, and fate of contaminants. This study revealed that a relatively new collision/reaction cell inductively coupled plasma-mass spectrometry is a potent tool for determining total and partially extractable solid-bound element (V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, and Pb) concentrations in a complex matrix solution containing HF and/or HCl. Six different extraction methods commonly used for environmental monitoring studies were tested for their bias and variability using estuarine and marine standard reference materials. Microwave-assisted methods based on concentrated [HNO₃] or [HNO₃?+?HF (4:1)] and [HNO₃?+?HF?+?HCl (10:3:2)] were applied for determining pseudo-total and total element concentrations, respectively. Dilute-acids (1 M HNO₃, 1 M HCl, and 0.5 M HCl) were utilized in single-step partial extraction protocols. Except the 0.5 M HCl cold-extraction method which was performed at room temperature, other partial extraction protocols used microwave-digestion. This study demonstrated that the use of microwave-assisted methods in studies aimed at determining the non-residual, non-specific extractable fractions of elements in solid environmental samples may result in overestimation, and thus needs to be re-examined. We believe that the cold extraction method will play a significant role in future environmental monitoring studies. Nevertheless, results of the cold extraction method not accompanied with total element concentrations have limited value, as the amount of extraction may vary significantly with the nature (origin) of the elements, and with the types of the samples. Therefore, we suggest combining microwave-assisted total digestion and 0.5 M HCl cold-extraction methods as a relatively cost- and time-effective, environmentally sound screening procedure for routine environmental monitoring programs involving a large number of samples from diverse geological and anthropogenic settings.     

Comparison of Cationic and Unmodified Starches in Reactive Extrusion of Starch–Polyacrylamide Graft Copolymers

Graft copolymers of starch and polyacrylamide (PAAm) were prepared using reactive extrusion in a corotating twin screw extruder. The effect of cationic starch modification was examined using unmodified and cationic dent starch (≈23% amylose) and waxy maize starch (≈2% amylose). For a fixed acrylamide/starch feed ratio, conversion, graft content, and grafting efficiency were essentially unaffected by starch type or modification. Cationic starch graft copolymers generally had lower molecular weight PAAm grafts compared to the unmodified starch, whereas amylose content had little or no significant effect. In addition, the frequency of grafting was higher with cationic starch. These results indicate that cationic modification of starch enhances formation of grafting sites, resulting in graft copolymers with more grafts of lower molecular compared to unmodified starch. Cationic modification may therefore be a way to tailor the properties of starch–PAAm graft copolymers.     

Effect of Orientation on the Morphology and Mechanical Properties of PLA/Starch Composite Filaments

Polylactic acid (PLA)/starch fibers were produced by twin screw extrusion of PLA with granular or gelatinized starch/glycerol followed by drawing through a set of winders with an intermediate oven. At 30% starch, fibers drawn 2–5x were highly flexible (elongation 20–100%) while undrawn filaments were brittle (elongation 2–9%). Tensile strength and moduli increased with increasing draw ratio but decreased with increasing starch content. Mechanical properties were better for composites made with gelatinized starch/glycerol than granular starch. In conclusion, orientation greatly increases the flexibility of PLA/starch composites and this may be useful not only in fibers but also possibly in molded articles. Other advantages of starch addition could include fiber softness without added plasticizer, moisture/odor absorbency and as a carrier for active compounds.