Evidence of reproductive disturbance in Astyanax lacustris (Teleostei: Characiformes) from the Doce River after the collapse of the Fundão Dam in Mariana,Brazil

Environmental Science and Pollution Research - The Fundão Dam collapsed, on November 5th, 2015, dumping more than 50 million/m3 of iron ore tailings, enriched with metals, into the Doce River...     

2,4-Dichlorophenoxyacetic acid (2,4-D) photodegradation on WO3-TiO2-SBA-15 nanostructured composite

Environmental Science and Pollution Research - A current environmental problem is the uncontrolled use of various pesticides that are harmful to the environment and public health. The herbicide...     

Deployment of parabolic trough concentrated solar power plants in North Africa – a case study for Libya

The study addresses the potential of using concentrated solar power plants (CSPs) as a sustainable alternative of clean energy generation in the Mediterranean region and, in particular, in its North Africa shore. This location presents attractive conditions for the installation of CSPs, in particular high solar irradiation, good manpower concentration, and proximity and availability of water resources for condenser cooling. Energetic, exergetic, and economic analyses were conducted taking into consideration a particular type of CSPs - the parabolic trough concentrated solar power plant, which incorporates the most proven technology and it is already used in Southern Europe (Spain). In addition, the study considered the impact of project financing and incentives on the cost of energy. The combination of higher values for performance and potentially lower levelized cost of electricity (LCE) for the North Africa Mediterranean Rim than the South of Spain region can yield a very favorable return for the invested capital. Tripoli compared to Almeria presented superior performance and potentially lower LCE values ($0.18/kWh versus $0.22/kWh). This is significant, even when it is taken into consideration the fact that the plant in Tripoli, despite a relatively modest capacity factor of 34%, has a large gross power output of 173,886 MWhe. In addition, the implementation at the Tripoli location of a plant similar to the Anadsol plant has a slight advantage (2–3%) in terms of overall efficiency.     

A climate-change vulnerability and adaptation assessment for Brazil's protected areas

Brazil hosts the largest expanse of tropical ecosystems within protected areas (PAs), which shelter biodiversity and support traditional human populations. We assessed the vulnerability to climate change of 993 terrestrial and coastal-marine Brazilian PAs by combining indicators of climatic-change hazard with indicators of PA resilience (size, native vegetation cover, and probability of climate-driven vegetation transition). This combination of indicators allows the identification of broad climate-change adaptation pathways. Seventeen PAs (20,611 km²) were highly vulnerable and located mainly in the Atlantic Forest (7 PAs), Cerrado (6), and the Amazon (4). Two hundred fifty-eight PAs (756,569 km²), located primarily in Amazonia, had a medium vulnerability. In the Amazon and western Cerrado, the projected severe climatic change and probability of climate-driven vegetation transition drove vulnerability up, despite the generally good conservation status of PAs. Over 80% of PAs of high or moderate vulnerability are managed by indigenous populations. Hence, besides the potential risks to biodiversity, the traditional knowledge and livelihoods of the people inhabiting these PAs may be threatened. In at least 870 PAs, primarily in the Atlantic Forest and Amazon, adaptation could happen with little or no intervention due to low climate-change hazard, high resilience status, or both. At least 20 PAs in the Atlantic Forest, Cerrado, and Amazonia should be targeted for stronger interventions (e.g., improvement of ecological connectivity), given their low resilience status. Despite being a first attempt to link vulnerability and adaptation in Brazilian PAs, we suggest that some of the PAs identified as highly or moderately vulnerable should be prioritized for testing potential adaptation strategies in the near future.     

First-trimester fetal sex determination in maternal serum using real-time PCR

An Erratum has been published for this article in Prenatal Diagnosis 22(13) 2002, 1241. Fetal sex prediction can be achieved using PCR targeted at the SRY gene by analysing cell-free fetal DNA in maternal serum. Unfortunately, the results reported to date show a lack of sensitivity, especially during the first trimester of pregnancy. Therefore, determination of fetal sex by maternal serum analysis could not replace karyotype analysis following chorionic villus sampling. A new highly sensitive real-time PCR was developped to detect an SRY gene sequence in maternal serum. Analysis was performed on 121 pregnant women during the first trimester of pregnancy (mean gestational age: 11.8 weeks). Among them, 51 had at least one previous male-bearing pregnancy. Results were compared with fetal sex. SRY PCR analysis of maternal serum was in complete concordance with fetal sex. Among the 121 pregnant women, 61 were bearing a male fetus and 60 a female fetus. No false-negative results were observed. Furthermore, no false-positive results occurred, even though 27 women carrying a female fetus during the current pregnancy had at least one previous male-bearing pregnancy. This study demonstrates that a reliable, non-invasive sex determination can be achieved by PCR analysis of maternal serum during the first trimester of pregnancy. This non-invasive approach for fetal sex prediction should have great implications in the management of pregnant women who are carriers of an X-linked genetic disorder. Prenatal diagnosis might thus be performed for male fetuses only, avoiding invasive procedures and the risk of the loss of female fetuses. Copyright © 2001 John Wiley & Sons, Ltd.     

Trophic segregation between sexes in the Black Skimmer revealed through the analysis of stable isotopes

The degree of individual or gender variation when exploiting food resources is an important aspect in the study of foraging ecology within a population. Previous information on non-breeding skimmers obtained through conventional methodologies suggested sex-related differences in prey species. In this study, stable isotope techniques were used to investigate the intraspecific segregation in diet and foraging habits of the Black Skimmer (Rynchops niger intercedens) at Mar Chiquita Coastal Lagoon (37°40′S, 57°22′W), Argentina. These results were compared with contemporary data on the trophic composition obtained by conventional methodologies. Blood samples were taken from birds captured with mist-nets during their non-breeding season. The isotopic signatures of skimmers showed a diet mainly composed of marine prey with some degree of estuarine fish intake. When comparing diet between sexes, males showed enrichment in ¹⁵N compared to females, while no differences were observed in ¹³C. The use of mixing models revealed differences in the relative composition of prey in the diet of male and female skimmers. This study highlights stable isotope analysis as a valuable tool to test inter-individual differences and sexual segregation in trophic ecology of Black Skimmers as compared to conventional methodologies. The results show a trophic segregation in the Black Skimmer during the non-breeding season that can be explained by differences in prey species and larger prey sizes of male skimmers. Our findings have significant implications for conservation since any environmental change occurring at wintering areas might have profound effects on several avian life-history traits, and could be different for males and females due to trophic segregation.     

Effects of calcium hydroxide and calcium chloride addition to bentonite in iron ore pelletization.

Pyrite ash is created as waste from the roasting of pyrite ores during the production of sulphuric acid. These processes generate great amounts of pyrite ash waste that is generally land filled. This creates serious environmental pollution due to the release of acids and toxic substances. Pyrite ash waste can be utilized in the iron production industry as a blast furnace feed to process this waste and prevent environmental pollution. The essential parameters affecting the pelletization process of pyrite ash were studied using bentonite as a binder. Experiments were then carried out using bentonite and a mixture of bentonite with calcium hydroxide and calcium chloride in order to make the bentonite more effective. The metallurgical properties of pyrite ash, bentonite, calcium hydroxide, calcium chloride, a mixture of these and sintered pellets were studied using X-ray analysis. The crushing strength tests were carried out to investigate the strength of pyrite ash waste pellets. The results of these analyses showed that pyrite ash can be agglomerated to pellets and used in the iron production industry as a blast furnace feed. The crushing strength of the pellets containing calcium hydroxide and calcium chloride in addition to bentonite was better than the strength of pellets prepared using only bentonite binder.     

Discrete event simulation to aid decision-making and mitigation in solid waste management

This article aims to evaluate municipal solid waste (MSW) management schemes in order to promote sustainability and eco-efficiency, core elements in global mitigation strategies in both public and private policies. A discrete event simulation (DES) approach was used to integrate the economic, environmental, and social aspects related to aseptic carton packages (ACP) in Itajuba, Brazil. The simulated scenarios consider three alternatives for disposing ACP: landfills, recycling, and incineration with energy recovery. According to our findings, incineration alternatives are preferred from an eco-efficiency perspective, given the potential greenhouse gas (GHG) emissions reductions and due to the possibility of energy recover, which reinforces the contribution of this technology to promote sustainability as largely found in the international literature. Given the context of MSW management in Brazil, this represents a significant opportunity to increase the effectiveness of mitigation strategies adopted in the country. Taking into account that this is by far the least applied technology, the authors strongly advocate that global strategies for mitigation consider different approaches to integrate carbon dioxide (CO₂) emission reductions related to the entire MSW management system and its alternatives, thus advancing from a waste disposal-oriented system to a life cycle–oriented system.