Abating whey organic load through ethanol and lactic acid production by kefir

Abstract

The extent to which selected ethanol and lactic acid production bioprocesses contribute to whey waste abatement was examined. Alcoholic fermentation of whey was carried out by kefir cells immobilized on grape stalks, delignified cellulosic materials, or brewer's spent grains. Lactic acid fermentation was also performed by free kefir cells with or without addition of brewer's spent grains as promoting material. Since whey fermentation rate is affected by the lactose uptake rate, ¹⁴C-labeled lactose was used to study the fermentation ability of kefir. The highest reductions in biochemical oxygen demand and chemical oxygen demand of whey, about 68% and 52%, respectively, were achieved by lactic acid fermentation in 6 h at 37 °C and pH 5.5, in the presence of 120 g brewer's spent grains. Additionally, at the same conditions, the highest ¹⁴C-labeled lactose uptake rate by kefir and consequently the highest alcoholic fermentation rate were also recorded. However, greater reductions in biochemical oxygen demand and chemical oxygen demand of whey are required prior to final disposal.     

A landscape-scale framework to identify refugia from multiple stressors

From a conservation perspective, quantifying potential refugial capacity has been predominantly focused on climate refugia, which is critical for maintaining the persistence of species and ecosystems. However, protection from other stressors, such as human-induced changes in fire and hydrology, that cause habitat loss, degradation, and fragmentation is also necessary to ensure that conservation efforts focused on climate are not undermined by other threats. Thus, conceptual and methodological advances for quantifying potential refugia from multiple anthropogenic stressors are important to support conservation efforts. We devised a new conceptual approach, the domains of refugia, for assessing refugial capacity that identifies areas where exposure to multiple stressors is low. In our framework, patterns of environmental variability (e.g., increased frequency of warm summers), thresholds of resilience, and extent and intensity of stressors are used to identify areas of potential refugia from a suite of ongoing anthropogenic stressors (e.g., changes in fire regime). To demonstrate its utility, we applied the framework to a Southern California landscape. Sites with high refugial capacity (super-refugia sites) had on average 30% fewer extremely warm summers, 20% fewer fire events, 10% less exposure to altered river channels and riparian areas, and 50% fewer recreational trails than the surrounding landscape. Our results suggest that super-refugia sites (∼8200 km²) for some natural communities are underrepresented in the existing protected area network, a finding that can inform efforts to expand protected areas. Our case study highlights how considering exposure to multiple stressors can inform planning and practice to conserve biodiversity in a changing world.     

Field scale variability of cadmium and zinc in soil and barley

CaCl₂-extractable soil Cd and Zn contents have been suggested as a measure of bioavailability. To investigate the ability of this measure to reflect spatial patterns of Cd and Zn concentrations in barley (Hordeum vulgare L.) in an arable field, plant and soil samples were taken from a 0.5 ha area sandy soil contaminated with Cd and Zn. Cd and Zn contents in barley and yield were spatially variable. Yield was low, which may have been caused by Zn toxicity or atrazine turnover. For Cd, CaCl₂-extractable soil contents explained only 17% of the variation in Cd contents in grain, and for Zn no significant correlation was observed. Nevertheless, surface plots of CaCl₂-extractable soil contents and contents of barley grain illustrated their corresponding spatial patterns. Despite the poor linear correlation between CaCl₂-extractable soil-Cd and grain-Cd, a stochastic model for long term behaviour of Cd in field soils predicted observed variability in Cd contents of barley grain well from spatial variability of soil pH and organic matter content. The probabilistic model predicted behaviour of Cd in terms of probability, and was more appropriate than the deterministic approach.     

Applications of life cycle assessment and cost analysis in health care waste management

The establishment of rules to manage Health Care Waste (HCW) is a challenge for the public sector. Regulatory agencies must ensure the safety of waste management alternatives for two very different profiles of generators: (1) hospitals, which concentrate the production of HCW and (2) small establishments, such as clinics, pharmacies and other sources, that generate dispersed quantities of HCW and are scattered throughout the city. To assist in developing sector regulations for the small generators, we evaluated three management scenarios using decision-making tools. They consisted of a disinfection technique (microwave, autoclave and lime) followed by landfilling, where transportation was also included. The microwave, autoclave and lime techniques were tested at the laboratory to establish the operating parameters to ensure their efficiency in disinfection. Using a life cycle assessment (LCA) and cost analysis, the decision-making tools aimed to determine the technique with the best environmental performance. This consisted of evaluating the eco-efficiency of each scenario. Based on the life cycle assessment, microwaving had the lowest environmental impact (12.64 Pt) followed by autoclaving (48.46 Pt). The cost analyses indicated values of US$ 0.12 kg^?1 for the waste treated with microwaves, US$ 1.10 kg^?1 for the waste treated by the autoclave and US$ 1.53 kg^?1 for the waste treated with lime. The microwave disinfection presented the best eco-efficiency performance among those studied and provided a feasible alternative to subsidize the formulation of the policy for small generators of HCW.     

Family–work conflict and job performance: A diary study of boundary conditions and mechanisms

In this study, we used a within‐person daily research paradigm to examine the relationship between daily family–work conflict (FWC) and daily job performance. On the basis of theory on dynamic behavior, we hypothesized that concentration serves as a mechanism through which daily FWC impairs daily job performance. We further predicted that psychological detachment from work during time‐off (i.e., mentally switching off) buffers the negative relationship between daily FWC and daily job performance. Ninety‐five employees completed daily surveys over one workweek. Multilevel modeling results showed that daily FWC was negatively associated with daily job performance and that concentration mediated this relationship. Furthermore, general psychological detachment, but not daily psychological detachment, buffered the negative relationship between daily FWC and daily job performance. The current findings suggest that daily FWC has negative performance implications and that the general level rather than the daily level of psychological detachment from work helps alleviate the negative implications. Copyright © 2013 John Wiley & Sons, Ltd.     

Shell ecophenotype in the blue mussel (<Emphasis Type="Italic">Mytilus edulis</Emphasis>) determines the spatial pattern in foraging behaviour of an oystercatcher (<Emphasis Type="Italic">Haematopus ostralegus</Emphasis>) population

When feeding on blue mussels (Mytilus edulis), oystercatchers (Haematopus ostralegus) either stab into the mollusc’s gaping valves or hammer through its dorsal or ventral shell. Whilst the selectivity of hammering and stabbing oystercatchers for specific prey morphologies has been well studied, the way in which the effects of environment on M. edulis morphology can in turn affect feeding methods of H. ostralegus is very poorly understood. Based on morphological analyses on randomly selected shells from three intertidal zones, this study failed to detect differences in morphology or distribution of dorsally and ventrally hammered shells but confirms the finding of previous authors that hammering oystercatchers select thinner mussels than stabbing birds. Additionally, we show that this difference in optimal prey morphology can lead to spatial patterns in oystercatcher feeding behaviour. Whilst at the low intertidal and higher mid intertidal zones, characterised by comparatively thick shells, most empty shells had apparently been stabbed, hammering was the dominant feeding behaviour at the lower mid intertidal zone, where shells were thinner. Preference of hammering birds for smaller mussels was not ubiquitous. Sagittal shell shape was predominantly influenced by allometric growth effects and had only minor effect on prey selection. All oystercatchers preferred less inflated mussels, with the degree of shell inflation gradually increasing with higher intertidal elevation. Our results illustrate the importance of small-scale patterns in prey ecophenotypes in determining the distribution and feeding dynamics of wading birds.     

Assessment of patch quality by ladybirds: relative response to conspecific and heterospecific larval tracks a consequence of habitat similarity?

Summary. Aphid colonies can reach high levels of abundance but last for short periods of time. The larvae of aphidophagous ladybirds (Coleoptera: Coccinellidae) that feed on these colonies might therefore suffer from starvation, which favours the occurrence of cannibalism and intraguild predation. Thus, the assessment of patch quality becomes crucial and it has been shown that female ladybirds refrain from laying eggs in the presence of an oviposition deterring semiochemical deposited by their larvae. Adalia bipunctata (L.), Adalia decempunctata (L.) and Coccinella septempunctata L. are 3 sympatric species of ladybirds, which can co-occur in aphid colonies. As a consequence, their eggs and larvae are under threat, not only from cannibalism but also intraguild predation. Females should, therefore, also use the tracks deposited by heterospecific larvae to assess the quality of aphid colonies as oviposition sites. The expectation is that: 1- the strength of the reaction to each other’s larval tracks should be correlated with percentage habitat overlap and that 2- the reaction to conspecific larval tracks should be stronger than to heterospecific tracks. In order to test these hypotheses, females’ oviposition behaviour was analysed and a chemical analysis of the tracks of their larvae undertaken. The results show that oviposition behaviour is not related to habitat overlap. Both species of Adalia react to tracks of their own larvae and those of C. septempunctata, but A. decempunctata reacted more strongly than A. bipunctata. C. septempunctata reacted very slightly to its own tracks but not to those of either species of Adalia. The larval tracks are mainly composed of alkanes. Those of the two species of Adalia are qualitatively 100% similar and 60% so when the quantitative results are compared. They are, however, only 24–29% similar to those of Coccinella septempunctata.     

Sardine (Sardina pilchardus) spawning seasonality in European waters of the northeast Atlantic

Egg data from ichthyoplankton monitoring sites in the western English Channel (1988–2003) and northern Spain (1990–2000) and macroscopic maturity data from biological samples of purse seine landings in western and southern Iberia (1980–2004) are used to describe the spawning seasonality of sardine (Sardina pilchardus) in European waters of the northeast Atlantic using generalised additive models. The fitted models reveal a double peak in spawning activity during early summer and autumn in the western Channel, a wider spring peak off northern Spain and a broad winter season in the western and southern Iberian Peninsula. At all sites, a high probability of spawning activity was observed over at least 3 months of the year, with the duration of the season increasing with both decreasing latitude and increasing fish size. Off western and southern Iberia there are indications that the spawning season has been of longer duration in recent years for all size classes (reaching in some cases 8 months of the year for large fish). These patterns are in general agreement with existing literature and theoretical expectations of sardine spawning being driven locally by the seasonal cycle of water temperature, assuming preferences for spawning at 14 –15°C and avoidance for temperatures below 12°C and above 16°C. Regional quotient plots indicated that spawning tolerance to higher temperatures increases progressively with decreasing latitude. Despite the weak evidence for geographical differences in temperature tolerance that may have some genetic origin, the degree of spatio-temporal overlap in sardine-spawning activity within Atlantic European waters is unlikely to promote any reproductive isolation in that area.